aal2Cid
ZhoneAAL2-MIB ·
.1.3.6.1.4.1.5504.4.2.1.2.1.1
Object
column
Integer32
The Channel Identifier is one of the indices for
the CID table.
The maximum number of connections allowed per ATM
VCL is 255. Note that there are restrictions in
the use of CID and in order to be LES compliant.
The following assignments of AAL2 Channels and CID
Allocation are specified in STR-VMOA-LES-01-00,
Section 4.4.
0 Not used
1-7 Reserved for I.363.2 layer management
8 Some CPE manufactures use this CID for CCS
and/or Emulated Loop Control protocol
9 If LES-EOC is supported, else not used.
10-15 for future revisions of STR-VMOA-LES-01-00
16-223 Bearer channels and ISDN D-channels
224-255 set aside for vendor-specific usage
See STR-VMOA-LES-01-00 4.4 for allocation of CIDs
when ELCP is not used, allocation of CIDs when ELCP
is used, and implementation options for AAL2 CPS.
If the ELCP is not used, the default assignment of
CIDs to bearer channels and ISDN D-channels shall
be as specified in this section. These default
assignments may be overridden by provisioning or
by management action.
POTS ports at the CP-IWF shall be numbered from 1
to N, where N is the number of POTS ports that
exist at the CP-IWF. CID = 16 shall be assigned
to POTS port number 1, CID = 17 shall be assigned
to POTS port number 2, and so on up to POTS port
number N.
For Jetstream applications, CID refers to port
number and the valid range is 1 to 255.
For non-Jetstream applications, the valid range
is 16 to 255.
Context
- MIB
- ZhoneAAL2-MIB
- OID
.1.3.6.1.4.1.5504.4.2.1.2.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- aal2CidEntry
- Table
- aal2CidTable
- Siblings
- 23
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aal2CidCAS CAS (Channel Associated Signaling).
Refer to the corresponding object in the VCL
table.
Valid values are enabled and disabled. If
this value is not… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.2.1.10 |
| aal2CidDTMFDialedDigits DTMF Dialed Digits.
Refer to the corresponding object in the VCL
table.
Valid values are enabled and disabled. If
this value is not set by CLI or ZM… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.2.1.11 |
| aal2CidMfR1DialedDigits MF-R1 Dialed Digits.
Refer to the corresponding object in the VCL
table.
Valid values are enabled and disabled. If
this value is not set by CLI or Z… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.2.1.12 |
| aal2CidMfR2DialedDigits MF-R2 Dialed Digits.
Refer to the corresponding object in the VCL
table.
Valid values are enabled and disabled. If
this value is not set by CLI or Z… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.2.1.13 |
| aal2CidPCMEncoding PCM Encoding.
Refer to the corresponding object in the VCL
table.
Valid values are muLaw and aLaw. If this
value is not set by CLI or ZMS, the agent… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.2.1.14 |
| aal2CidMaxLengthFrame Max length frame mode data.
Refer to the corresponding object in the VCL
table.
Valid values are 1..65535. If this value is
not set by CLI or ZMS,… | column | octets Integer32 | .1.3.6.1.4.1.5504.4.2.1.2.1.15 |
| aal2CidMaxSDULength Max_SDU_Length
Refer to the corresponding object in the VCL
table.
Valid values are 1..65568. If this value is
not set by CLI or ZMS, the agent wil… | column | octets Integer32 | .1.3.6.1.4.1.5504.4.2.1.2.1.16 |
| aal2CidRasTimer Reassembly timer (RAS_Timer).
Refer to the corresponding object in the VCL
table.
If this value is not set by CLI or ZMS, the
agent will use the AA… | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.4.2.1.2.1.17 |
| aal2CidPreferredApIndex Index for the preferred audio encoding format within
the Audio Profile. The Index must be an agreed
operating parameter between the transmitter and
receiver for both directions. A… | column | Integer32 | .1.3.6.1.4.1.5504.4.2.1.2.1.18 |
| aal2CidCellsReceived Total cells received | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5504.4.2.1.2.1.19 |
| aal2CidAdminStatus This object is instantiated only for a VCL
which terminates a VCC (i.e., one which is NOT
cross-connected to other VCLs). Its value
specifies the desired administrative state of
… | column | ATM-TC-MIBAtmVorXAdminStatus | .1.3.6.1.4.1.5504.4.2.1.2.1.2 |
| aal2CidCellsSent Total cells sent | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5504.4.2.1.2.1.20 |
| aal2CidStatsTimeElapsed The number of seconds that have elapsed since
the beginning of the current collection
period. If, for some reason, such as an
adjustment in the system's time-of-day clock,
the … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.4.2.1.2.1.21 |
| aal2CidRowStatus Used to control row creation and deletion.
A row in this table is created using a
single SNMP SET request with varbinds for:
a) aal2CidRowStatus set to'CreateAndG… | column | Zhone-TCZhoneRowStatus | .1.3.6.1.4.1.5504.4.2.1.2.1.22 |
| aal2CidCompletedCalls Total number of completed calls made on the CID. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.5504.4.2.1.2.1.23 |
| aal2CidBlockedCallsNoBandwidth Total number of calls blocked on the CID because there
was not enough bandwidth to support the call. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.5504.4.2.1.2.1.24 |
| aal2CidOperStatus The current operational status of the CID.
Valid values are up, down, and unknown. | column | ATM-TC-MIBAtmVorXOperStatus | .1.3.6.1.4.1.5504.4.2.1.2.1.3 |
| aal2CidLastChange The value of sysUpTime at the time this CID
entered its current operational state,
indicated by aal2CidOperStatus. | column | ATM-TC-MIBAtmVorXLastChange | .1.3.6.1.4.1.5504.4.2.1.2.1.4 |
| aal2CidSscsType The SSCS type that applies to each channel of
an AAL2 VCC will vary according to the usage
of that channel. Channels that are used to
carry media streams (POTS or ISDN B-chann… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.2.1.5 |
| aal2CidAudioService Audio Service.
Refer to the corresponding object in the VCL
table.
Valid values are:
- enabled.
- disabled.
- enabledEchoCancelOff: audio service ena… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.2.1.6 |
| aal2CidCircuitModeData Circuit Mode Data.
Refer to the corresponding object in the VCL
table.
Valid values are enabled and disabled. If
this value is not set by CLI or ZMS… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.2.1.7 |
| aal2CidFrameModeData Frame Mode Data.
Refer to the corresponding object in the VCL
table.
Valid values are enabled and disabled. If
this value is not set by CLI or ZMS,… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.2.1.8 |
| aal2CidFaxDemoRemo Fax Demodulation/Remodulation.
Refer to the corresponding object in the VCL
table.
Valid values are enabled and disabled. If
this value is not set b… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.2.1.9 |