zhoneCpeWlanWpaEncryption
Zhone-CPE-MIB ·
.1.3.6.1.4.1.5504.5.16.1.23.2.1.11
Object
column
r/w
Enumeration
WPA encryption mode.
Context
- MIB
- Zhone-CPE-MIB
- OID
.1.3.6.1.4.1.5504.5.16.1.23.2.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zhoneCpeWlanEntry
- Table
- zhoneCpeWlanTable
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | aes |
2 | tkipaes |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zhoneCpeWlanIndex This represents the CPE WLAN index value. | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.23.2.1.1 |
| zhoneCpeWlanWpaGroupRekeyInterval Wpa Group Rekey Interval. | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.23.2.1.10 |
| zhoneCpeWlanWepEncryption WEP encryption mode. | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.16.1.23.2.1.12 |
| zhoneCpeWlanWepStrength WEP encryption strength. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.23.2.1.13 |
| zhoneCpeWlanRadiusServerIp IP address of the Remote Authentication Dial In User Server (RADIUS) used
for 802.1x authentication. Default is 0.0.0.0. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.5.16.1.23.2.1.14 |
| zhoneCpeWlanRadiusPort UDP port to use for accessing the Remote Authentication Dial In User
Server (RADIUS). | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.23.2.1.15 |
| zhoneCpeWlanWpa2PreAuthentication Enable or disable WPA2 pre-authentication. | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.16.1.23.2.1.16 |
| zhoneCpeWlanNetReAuthenticationInterval Configure the WPA2 network re-authentication time, in seconds. | column | seconds Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.23.2.1.17 |
| zhoneCpeWlanRowStatus Used to create, modify or delete an entry in this table. | column | Zhone-TCZhoneRowStatus | .1.3.6.1.4.1.5504.5.16.1.23.2.1.2 |
| zhoneCpeWlanProfileName This field is only writable upon creation and must be unique within
its table. | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.5.16.1.23.2.1.3 |
| zhoneCpeWlanHideAccessPoint Enable or disable the suppression of the advertising of the access point's
SSID. If enabled, clients will need to configure the SSID to associate. | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.16.1.23.2.1.4 |
| zhoneCpeWlanIsolateClients Isolate clients within the wireless network from communicating directly
with each other. | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.16.1.23.2.1.5 |
| zhoneCpeWlanWmmAdvertise WMM (Wireless Multi Media) provides a subset of the IEEE 802.11e QoS
standard, which adds prioritization to wireless to optimize their
performance. When multiple concurrent applic… | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.16.1.23.2.1.6 |
| zhoneCpeWlanMcastFwd Wireless Multicast Forwarding enables the ability to send wireless
packets to be intercepted by all nodes in the transmission range of
the sender. | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.16.1.23.2.1.7 |
| zhoneCpeWlanMaxClients The maximum number of wireless client devices that may be simultaneously
connected to the wireless network. | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.23.2.1.8 |
| zhoneCpeWlanNetAuthentication Configure the network authentication method. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.23.2.1.9 |