zhoneCpeWlanWmmAdvertise
Zhone-CPE-MIB ·
.1.3.6.1.4.1.5504.5.16.1.23.2.1.6
Object
WMM (Wireless Multi Media) provides a subset of the IEEE 802.11e QoS standard, which adds prioritization to wireless to optimize their performance. When multiple concurrent applications are on the wireless network each application may have different latency and throughput needs. WMM provides for this optimization, however WMM may provide slower.
Context
- MIB
- Zhone-CPE-MIB
- OID
.1.3.6.1.4.1.5504.5.16.1.23.2.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zhoneCpeWlanEntry
- Table
- zhoneCpeWlanTable
- Siblings
- 16
Values & Constraints
Type Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zhoneCpeWlanIndex This represents the CPE WLAN index value. | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.23.2.1.1 |
| zhoneCpeWlanWpaGroupRekeyInterval Wpa Group Rekey Interval. | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.23.2.1.10 |
| zhoneCpeWlanWpaEncryption WPA encryption mode. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.23.2.1.11 |
| zhoneCpeWlanWepEncryption WEP encryption mode. | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.16.1.23.2.1.12 |
| zhoneCpeWlanWepStrength WEP encryption strength. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.23.2.1.13 |
| zhoneCpeWlanRadiusServerIp IP address of the Remote Authentication Dial In User Server (RADIUS) used
for 802.1x authentication. Default is 0.0.0.0. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.5.16.1.23.2.1.14 |
| zhoneCpeWlanRadiusPort UDP port to use for accessing the Remote Authentication Dial In User
Server (RADIUS). | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.23.2.1.15 |
| zhoneCpeWlanWpa2PreAuthentication Enable or disable WPA2 pre-authentication. | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.16.1.23.2.1.16 |
| zhoneCpeWlanNetReAuthenticationInterval Configure the WPA2 network re-authentication time, in seconds. | column | seconds Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.23.2.1.17 |
| zhoneCpeWlanRowStatus Used to create, modify or delete an entry in this table. | column | Zhone-TCZhoneRowStatus | .1.3.6.1.4.1.5504.5.16.1.23.2.1.2 |
| zhoneCpeWlanProfileName This field is only writable upon creation and must be unique within
its table. | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.5.16.1.23.2.1.3 |
| zhoneCpeWlanHideAccessPoint Enable or disable the suppression of the advertising of the access point's
SSID. If enabled, clients will need to configure the SSID to associate. | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.16.1.23.2.1.4 |
| zhoneCpeWlanIsolateClients Isolate clients within the wireless network from communicating directly
with each other. | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.16.1.23.2.1.5 |
| zhoneCpeWlanMcastFwd Wireless Multicast Forwarding enables the ability to send wireless
packets to be intercepted by all nodes in the transmission range of
the sender. | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.16.1.23.2.1.7 |
| zhoneCpeWlanMaxClients The maximum number of wireless client devices that may be simultaneously
connected to the wireless network. | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.23.2.1.8 |
| zhoneCpeWlanNetAuthentication Configure the network authentication method. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.23.2.1.9 |