zhoneCpeWlanAdvDtimInterval

Zhone-CPE-MIB · .1.3.6.1.4.1.5504.5.16.1.31.2.1.15
MIB view Table view

Object

column r/w Unsigned32 
The interval at which Delivery Traffic Indication Messages (DTIM) are
generated. A DTIM message notifies a wireless client that a packet is
waiting for transmission.

Context

MIB
Zhone-CPE-MIB
OID
.1.3.6.1.4.1.5504.5.16.1.31.2.1.15
Type
column
Access
readwrite
Status
current
Parent
zhoneCpeWlanAdvancedEntry
Table
zhoneCpeWlanAdvancedTable
Siblings
26

Syntax

Unsigned32

Values & Constraints

Object Constraints
range: 1-255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
zhoneCpeWlanAdvIndex
This represents the CPE WLAN Advanced index value.
columnUnsigned32.1.3.6.1.4.1.5504.5.16.1.31.2.1.1
zhoneCpeWlanAdvRate54G
The rate when the radio is operating in 802.11g mode. This object only applies when the Multiple Input Multiple Output (MIMO) 802.11n Rate is set to use 54g.
columnEnumeration.1.3.6.1.4.1.5504.5.16.1.31.2.1.10
zhoneCpeWlanAdvMcastRate
The rate for the multicast traffic.
columnEnumeration.1.3.6.1.4.1.5504.5.16.1.31.2.1.11
zhoneCpeWlanAdvBasicRate
The rate when the radio is operating in basic 802.11b/g mode.
columnEnumeration.1.3.6.1.4.1.5504.5.16.1.31.2.1.12
zhoneCpeWlanAdvFragmentationThreshold
The threshold at which the packets are fragmented.
columnUnsigned32.1.3.6.1.4.1.5504.5.16.1.31.2.1.13
zhoneCpeWlanAdvRtsThreshold
The packet size of a request-to-send (RTS) transmission. A low threshold implies RTS packets are sent more frequently, thus requiring more bandwidth but ensuring packet transmissi…
columnUnsigned32.1.3.6.1.4.1.5504.5.16.1.31.2.1.14
zhoneCpeWlanAdvBeaconInterval
The interval at which Beacons are generated.
columnUnsigned32.1.3.6.1.4.1.5504.5.16.1.31.2.1.16
zhoneCpeWlanAdvGlobalMaxClients
The maximum number of wireless client devices that may be simultaneously connected to the radio. This value should include the sum total of all active SSIDs.
columnUnsigned32.1.3.6.1.4.1.5504.5.16.1.31.2.1.17
zhoneCpeWlanAdvXpressTechnology
Enable or disable the XPress(TM) Technology.
columnZhone-TCZhoneEnabledFlag.1.3.6.1.4.1.5504.5.16.1.31.2.1.18
zhoneCpeWlanAdvTxPower
The percentage of total power that should be used for data transmissions.
columnUnsigned32.1.3.6.1.4.1.5504.5.16.1.31.2.1.19
zhoneCpeWlanAdvRowStatus
Used to create, modify or delete an entry in this table.
columnZhone-TCZhoneRowStatus.1.3.6.1.4.1.5504.5.16.1.31.2.1.2
zhoneCpeWlanAdvWmm
Enable or disable Wifi Multimedia. When set to TRUE, audio, video and voice application data is prioritized over other network traffic.
columnZhone-TCZhoneEnabledFlag.1.3.6.1.4.1.5504.5.16.1.31.2.1.20
zhoneCpeWlanAdvWmmNoAck
Enable or disable the suppression of acknowledgements for frames that do not require a QOS Acknowledgement. This avoids the unnecessary transmission of acknowledgements for highly…
columnZhone-TCZhoneEnabledFlag.1.3.6.1.4.1.5504.5.16.1.31.2.1.21
zhoneCpeWlanAdvWmmApsd
Enable or disable the Automatic Power Save Delivery (APSD) power management method. This feature is useful for bi-directional applications, such as VoIp phones.
columnZhone-TCZhoneEnabledFlag.1.3.6.1.4.1.5504.5.16.1.31.2.1.22
zhoneCpeWlanAdvApMode
Wireless bridge modes of operation.
columnEnumeration.1.3.6.1.4.1.5504.5.16.1.31.2.1.23
zhoneCpeWlanAdvBridgeRestrict
Wireless Bridge Restriction Modes of operation.
columnEnumeration.1.3.6.1.4.1.5504.5.16.1.31.2.1.24
zhoneCpeWlanAdvWps
Enable or disable WiFi Protected Setup (WPS) security method. If WPS is enabled, the network authentication method, the data encryption, and network key should also be configured …
columnZhone-TCZhoneEnabledFlag.1.3.6.1.4.1.5504.5.16.1.31.2.1.25
zhoneCpeWlanAdvWpsAddClientMethod
A client can be added via three different methods.
columnEnumeration.1.3.6.1.4.1.5504.5.16.1.31.2.1.26
zhoneCpeWlanAdvWpsApMode
If the provider is using an external registrar for security, select configured. The PIN for AP mode is specified by the registrar. Provide this PIN to the client. Issue Config AP …
columnEnumeration.1.3.6.1.4.1.5504.5.16.1.31.2.1.27
zhoneCpeWlanAdvProfileName
This field is only writable upon creation and must be unique within its table.
columnZhone-TCZhoneAdminString.1.3.6.1.4.1.5504.5.16.1.31.2.1.3
zhoneCpeWlanAdvChannel
Defines which channel to use, or 'auto' for automatic selection of a channel with low interference. 802.11b and 802.11g use channels to limit interference from other devices.
columnEnumeration.1.3.6.1.4.1.5504.5.16.1.31.2.1.4
zhoneCpeWlanAdvAutoChanTimer
When configured for auto mode, this timer value specifies how often (in minutes) to re-analyze the spectrum to select a low interference channel. Note: auto channel rescan will on…
columnUnsigned32.1.3.6.1.4.1.5504.5.16.1.31.2.1.5
zhoneCpeWlanAdvDot11nMode
802.11n MIMO EWC modes of operation. 802.11n improves data rates via MIMO (multiple-input, multiple-output) using spatial streams which each have a channel width of 40 MHz or 20 M…
columnEnumeration.1.3.6.1.4.1.5504.5.16.1.31.2.1.6
zhoneCpeWlanAdvDot11nRate
Supported 802.11n MIMO rates, in Mbps.
columnEnumeration.1.3.6.1.4.1.5504.5.16.1.31.2.1.7
zhoneCpeWlanAdvDot1nProtection
802.11n MIMO protection modes.
columnEnumeration.1.3.6.1.4.1.5504.5.16.1.31.2.1.8
zhoneCpeWlanAdvDot1nClientOnly
Enable or disable the restriction of access to 802.11n clients, only. When enabled, prevent 802.11b/g clients from connecting.
columnZhone-TCZhoneEnabledFlag.1.3.6.1.4.1.5504.5.16.1.31.2.1.9