zhoneCpeWlanAdvAutoChanTimer
Zhone-CPE-MIB ·
.1.3.6.1.4.1.5504.5.16.1.31.2.1.5
Object
column
r/w
Unsigned32
When configured for auto mode, this timer value specifies how often (in minutes) to re-analyze the spectrum to select a low interference channel. Note: auto channel rescan will only occur when there are no actively connected devices.
Context
- MIB
- Zhone-CPE-MIB
- OID
.1.3.6.1.4.1.5504.5.16.1.31.2.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zhoneCpeWlanAdvancedEntry
- Table
- zhoneCpeWlanAdvancedTable
- Siblings
- 26
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zhoneCpeWlanAdvIndex This represents the CPE WLAN Advanced index value. | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.31.2.1.1 |
| zhoneCpeWlanAdvRate54G The rate when the radio is operating in 802.11g mode. This object only
applies when the Multiple Input Multiple Output (MIMO) 802.11n Rate is
set to use 54g. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.31.2.1.10 |
| zhoneCpeWlanAdvMcastRate The rate for the multicast traffic. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.31.2.1.11 |
| zhoneCpeWlanAdvBasicRate The rate when the radio is operating in basic 802.11b/g mode. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.31.2.1.12 |
| zhoneCpeWlanAdvFragmentationThreshold The threshold at which the packets are fragmented. | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.31.2.1.13 |
| zhoneCpeWlanAdvRtsThreshold The packet size of a request-to-send (RTS) transmission. A low threshold
implies RTS packets are sent more frequently, thus requiring more
bandwidth but ensuring packet transmissi… | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.31.2.1.14 |
| zhoneCpeWlanAdvDtimInterval The interval at which Delivery Traffic Indication Messages (DTIM) are
generated. A DTIM message notifies a wireless client that a packet is
waiting for transmission. | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.31.2.1.15 |
| zhoneCpeWlanAdvBeaconInterval The interval at which Beacons are generated. | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.31.2.1.16 |
| zhoneCpeWlanAdvGlobalMaxClients The maximum number of wireless client devices that may be simultaneously
connected to the radio. This value should include the sum total of all
active SSIDs. | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.31.2.1.17 |
| zhoneCpeWlanAdvXpressTechnology Enable or disable the XPress(TM) Technology. | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.16.1.31.2.1.18 |
| zhoneCpeWlanAdvTxPower The percentage of total power that should be used for data transmissions. | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.31.2.1.19 |
| zhoneCpeWlanAdvRowStatus Used to create, modify or delete an entry in this table. | column | Zhone-TCZhoneRowStatus | .1.3.6.1.4.1.5504.5.16.1.31.2.1.2 |
| zhoneCpeWlanAdvWmm Enable or disable Wifi Multimedia. When set to TRUE, audio, video and
voice application data is prioritized over other network traffic. | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.16.1.31.2.1.20 |
| zhoneCpeWlanAdvWmmNoAck Enable or disable the suppression of acknowledgements for frames that do
not require a QOS Acknowledgement. This avoids the unnecessary
transmission of acknowledgements for highly… | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.16.1.31.2.1.21 |
| zhoneCpeWlanAdvWmmApsd Enable or disable the Automatic Power Save Delivery (APSD) power
management method. This feature is useful for bi-directional applications,
such as VoIp phones. | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.16.1.31.2.1.22 |
| zhoneCpeWlanAdvApMode Wireless bridge modes of operation. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.31.2.1.23 |
| zhoneCpeWlanAdvBridgeRestrict Wireless Bridge Restriction Modes of operation. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.31.2.1.24 |
| zhoneCpeWlanAdvWps Enable or disable WiFi Protected Setup (WPS) security method. If WPS is
enabled, the network authentication method, the data encryption, and
network key should also be configured … | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.16.1.31.2.1.25 |
| zhoneCpeWlanAdvWpsAddClientMethod A client can be added via three different methods. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.31.2.1.26 |
| zhoneCpeWlanAdvWpsApMode If the provider is using an external registrar for security, select
configured. The PIN for AP mode is specified by the registrar. Provide
this PIN to the client. Issue Config AP … | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.31.2.1.27 |
| zhoneCpeWlanAdvProfileName This field is only writable upon creation and must be unique within
its table. | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.5.16.1.31.2.1.3 |
| zhoneCpeWlanAdvChannel Defines which channel to use, or 'auto' for automatic selection of a
channel with low interference. 802.11b and 802.11g use channels to limit
interference from other devices. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.31.2.1.4 |
| zhoneCpeWlanAdvDot11nMode 802.11n MIMO EWC modes of operation. 802.11n improves data rates via MIMO
(multiple-input, multiple-output) using spatial streams which each have a
channel width of 40 MHz or 20 M… | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.31.2.1.6 |
| zhoneCpeWlanAdvDot11nRate Supported 802.11n MIMO rates, in Mbps. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.31.2.1.7 |
| zhoneCpeWlanAdvDot1nProtection 802.11n MIMO protection modes. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.31.2.1.8 |
| zhoneCpeWlanAdvDot1nClientOnly Enable or disable the restriction of access to 802.11n clients, only.
When enabled, prevent 802.11b/g clients from connecting. | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.16.1.31.2.1.9 |