accessSwitchSlotId

ZYXEL-accessSwitch-MIB · .1.3.6.1.4.1.890.1.5.1.1.11
MIB view Table view

Object

scalar mandatory r/w ASSlotNum 
The slot Id of the module

Context

MIB
ZYXEL-accessSwitch-MIB
OID
.1.3.6.1.4.1.890.1.5.1.1.11
Type
scalar
Access
readwrite
Status
mandatory
Parent
accessSwitchMgnt
Siblings
28

Syntax

ASSlotNum
Source
ASSlotNum
Base type
Enumeration

Values & Constraints

Type Values
1slot1
2slot2

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
accessSwitchSystemCurrentStatus mandatory
This variable indicates the status of the system. The sysCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The sysNoDef…
scalarInteger32.1.3.6.1.4.1.890.1.5.1.1.1
acccessSwitchChassisId mandatory
The chassis Id of the module
scalarInteger32.1.3.6.1.4.1.890.1.5.1.1.10
accessSwitchModuleType mandatory
The type of the module
scalarASModuleType.1.3.6.1.4.1.890.1.5.1.1.12
accessSwitchFWVersion mandatory
The firmware version of the access switch.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.890.1.5.1.1.13
accessSwitchDriverVersion mandatory
The driver version of the access port in this access switch
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.890.1.5.1.1.14
accessSwitchModemCodeVersion mandatory
The modem code version of the access port in this access switch
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.890.1.5.1.1.15
accessSwitchDSLConfOps mandatory
The managed object is for xDSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be…
scalarInteger32.1.3.6.1.4.1.890.1.5.1.1.16
accessSwitchDSLConfTarget mandatory
The managed object is used for identify the target on which the line configuration should be performed. The target is encoded as: Byte 1~4: reserved Byte 5~7: each octet specifi…
scalarOctetString.1.3.6.1.4.1.890.1.5.1.1.17
accessSwitchDSLConfProfileName mandatory
The DSL profile name
scalarOctetString.1.3.6.1.4.1.890.1.5.1.1.18
accessSwitchDSLConfMode mandatory
The DSL mode. The semantic for each bit is: Bit 1: ADSL, G.lite Bit 2: ADSL, G.dmt Bit 3: ADSL, T1.413 Bit 4: ADSL, Auto
scalarInteger32.1.3.6.1.4.1.890.1.5.1.1.19
accessSwitchProblemCause mandatory
The variable is the description of sytsem problem.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.890.1.5.1.1.2
asPacketForwardingTable mandatory
This table includes the configuration of packet forwarding.
table-.1.3.6.1.4.1.890.1.5.1.1.20
asDhcpRelayEnable mandatory
Enable/disable DHCP relay function.
scalarEnumeration.1.3.6.1.4.1.890.1.5.1.1.21
asDhcpRelayOption82Enable mandatory
Enable/disable the relay agent information option.
scalarEnumeration.1.3.6.1.4.1.890.1.5.1.1.22
asDhcpRelayOption82Info mandatory
User specific relay agent information.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.890.1.5.1.1.23
asMaxNumOfDhcpServers mandatory
The maximum number of DHCP servers.
scalarInteger32.1.3.6.1.4.1.890.1.5.1.1.24
asDhcpServerTable mandatory
A table that contains DHCP server information.
table-.1.3.6.1.4.1.890.1.5.1.1.25
asMaxNumberOfRadiusServers mandatory
The max number of the RADIUS Servers.
scalarInteger32.1.3.6.1.4.1.890.1.5.1.1.28
asRadiusServerTable mandatory
A table that contains Radius Server information.
table-.1.3.6.1.4.1.890.1.5.1.1.29
accessSwitchSystemTemperature mandatory
The variable is the current temperature in Celsius of the system.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.890.1.5.1.1.3
asDot1xEnable mandatory
Enable/disable the 802.1x function.
scalarEnumeration.1.3.6.1.4.1.890.1.5.1.1.30
asDot1xPortTable mandatory
This table includes the configuration of 802.1x.
table-.1.3.6.1.4.1.890.1.5.1.1.31
accessSwitchFanRpmTable mandatory
A table that contains rpm information about the fans.
table-.1.3.6.1.4.1.890.1.5.1.1.4
accessSwitchVoltageTable mandatory
A table that contains voltage information about the system.
table-.1.3.6.1.4.1.890.1.5.1.1.5
accessSwitchSysTempTable mandatory
A table that contains temperature information about system.
table-.1.3.6.1.4.1.890.1.5.1.1.6
accessSwitchMaintenance mandatory
The managed object is for system maintenance. When the EMS wants to trigger the system maitenance operation, the EMS shall send SNMP-SET message to set the corresponding bit value…
scalarInteger32.1.3.6.1.4.1.890.1.5.1.1.7
accessSwitchMaintenancePort mandatory
The port which the maintenance operation should be performed on. The value of 0 means the maintenance should be performed on the system.
scalarInteger32.1.3.6.1.4.1.890.1.5.1.1.8
accessSwitchMaxNumOfStaticVlans mandatory
The maximum number of static VLANs which the system supports
scalarInteger32.1.3.6.1.4.1.890.1.5.1.1.9