accessSwitchVdslLineConfProfileEntry

ZYXEL-VDSLLINE-MIB · .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1
MIB view Table view

Object

row mandatory 
Each entry consists of a list of parameters that
represents the configuration of an VDSL modem.
            
When `dynamic' profiles are implemented, a default
profile will always exist.  This profile's name will
be set to `DEFVAL' and its parameters will be set
to vendor specific values, unless otherwise specified
in this document.
            
When `static' profiles are implemented, profiles
are automaticly created or destroyed as VDSL
physical lines are discovered and removed by
the system.  The name of the profile will be
equivalent to the decimal value of the line's
interface index.

Context

MIB
ZYXEL-VDSLLINE-MIB
OID
.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1
Type
row
Status
mandatory
Parent
accessSwitchVdslLineConfProfileTable
Table
accessSwitchVdslLineConfProfileTable
Children
11

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects
ObjectTypeSyntaxOID
accessSwitchVdslLineConfProfileName mandatory
This object is used by the line configuration table in order to identify a row of this table. When `dynamic' profiles are implemented, the profile name is user spec…
columnOctetString.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.1
accessSwitchVdslVturConfMinSnrMgn mandatory
Configured Minimum acceptable Signal/Noise Margin in 0.01dB. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not pos…
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.10
accessSwitchVdslLineConfProfileRowStatus mandatory
This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active' is set, the syste…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.11
accessSwitchVdslLineConfMode mandatory
Specifies the VDSL mode type used on this line.
columnEnumeration.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.2
accessSwitchVdslVtuoConfRate mandatory
Transmission rate in bits-per-second specified by this VTU.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.3
accessSwitchVdslVtuoConfTargetSnrMgn mandatory
Configured Target Signal/Noise Margin in 0.01dB. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.4
accessSwitchVdslVtuoConfMaxSnrMgn mandatory
Configured Maximum acceptable Signal/Noise Margin in 0.01dB. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.5
accessSwitchVdslVtuoConfMinSnrMgn mandatory
Configured Minimum acceptable Signal/Noise Margin in 0.01dB. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not pos…
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.6
accessSwitchVdslVturConfRate mandatory
Transmission rate in bits-per-second specified by this VTU.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.7
accessSwitchVdslVturConfTargetSnrMgn mandatory
Configured Target Signal/Noise Margin in 0.01dB. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.8
accessSwitchVdslVturConfMaxSnrMgn mandatory
Configured Maximum acceptable Signal/Noise Margin in 0.01dB. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.9
Indexes
ObjectTypeSyntaxOID
accessSwitchVdslLineConfProfileName mandatory
This object is used by the line configuration table in order to identify a row of this table. When `dynamic' profiles are implemented, the profile name is user spec…
columnOctetString.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.1