accessSwitchVdslLineConfMode
ZYXEL-VDSLLINE-MIB ·
.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.2
Object
column
mandatory
Enumeration
Specifies the VDSL mode type used on this line.
Context
- MIB
- ZYXEL-VDSLLINE-MIB
- OID
.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.2- Type
- column
- Status
- mandatory
- Parent
- accessSwitchVdslLineConfProfileEntry
- Table
- accessSwitchVdslLineConfProfileTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | tenBase-S |
1 | ansi |
2 | etsi |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| accessSwitchVdslLineConfProfileName mandatory This object is used by the line configuration table
in order to identify a row of this table.
When `dynamic' profiles are implemented, the profile
name is user spec… | column | OctetString | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.1 |
| accessSwitchVdslVturConfMinSnrMgn mandatory Configured Minimum acceptable Signal/Noise Margin in 0.01dB.
If the noise margin falls below this level, the modem
should attempt to increase its power output. If that
is not pos… | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.10 |
| accessSwitchVdslLineConfProfileRowStatus mandatory This object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to
`active'. When `active' is set, the syste… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.11 |
| accessSwitchVdslVtuoConfRate mandatory Transmission rate in bits-per-second specified by this VTU. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.3 |
| accessSwitchVdslVtuoConfTargetSnrMgn mandatory Configured Target Signal/Noise Margin in 0.01dB.
This is the Noise Margin the modem must achieve
with a BER of 10-7 or better to successfully complete
initialization. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.4 |
| accessSwitchVdslVtuoConfMaxSnrMgn mandatory Configured Maximum acceptable Signal/Noise Margin in 0.01dB.
If the Noise Margin is above this the modem should
attempt to reduce its power output to optimize its
operation. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.5 |
| accessSwitchVdslVtuoConfMinSnrMgn mandatory Configured Minimum acceptable Signal/Noise Margin in 0.01dB.
If the noise margin falls below this level, the modem
should attempt to increase its power output. If that
is not pos… | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.6 |
| accessSwitchVdslVturConfRate mandatory Transmission rate in bits-per-second specified by this VTU. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.7 |
| accessSwitchVdslVturConfTargetSnrMgn mandatory Configured Target Signal/Noise Margin in 0.01dB.
This is the Noise Margin the modem must achieve
with a BER of 10-7 or better to successfully complete
initialization. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.8 |
| accessSwitchVdslVturConfMaxSnrMgn mandatory Configured Maximum acceptable Signal/Noise Margin in 0.01dB.
If the Noise Margin is above this the modem should
attempt to reduce its power output to optimize its
operation. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.9 |