traceRouteCtlRowStatus

ZYXEL-ES3124PWR-MIB · .1.3.6.1.4.1.890.1.5.8.14.23.5.1.29
MIB view Table view

Object

column r/w SNMPv2-TCRowStatus 
This object allows entries to be created and deleted
in the traceRouteCtlTable.  Deletion of an entry in
this table results in all corresponding (same
traceRouteCtlOwnerIndex and traceRouteCtlTestName
index values) traceRouteResultsTable,
traceRouteProbeHistoryTable, and traceRouteHopsTable
entries being deleted.
A value MUST be specified for traceRouteCtlTargetAddress
prior to a transition to active(1) state being
accepted.
Activation of a remote traceroute operation is
controlled via traceRouteCtlAdminStatus and not
by transitioning of this object's value to active(1).
Transitions in and out of active(1) state are not
allowed while an entry's traceRouteResultsOperStatus
is active(1) with the exception that deletion of
an entry in this table by setting its RowStatus
object to destroy(6) will stop an active
traceroute operation.
The operational state of an traceroute operation
can be determined by examination of the corresponding
traceRouteResultsOperStatus object.

Context

MIB
ZYXEL-ES3124PWR-MIB
OID
.1.3.6.1.4.1.890.1.5.8.14.23.5.1.29
Type
column
Access
readwrite
Status
current
Parent
traceRouteCtlEntry
Table
traceRouteCtlTable
Siblings
28

Syntax

SNMPv2-TCRowStatus
Source
SNMPv2-TCRowStatus
Base type
Enumeration

Values & Constraints

Type Values
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
traceRouteCtlServInstType
The type of the service instance that this traceRoute entry belong to. 1: VLAN. This item would be used as an index
columnEnumeration.1.3.6.1.4.1.890.1.5.8.14.23.5.1.1
traceRouteCtlProbesPerHop
Specifies the number of times to reissue a traceroute request with the same time-to-live (TTL) value.
columnprobes Unsigned32.1.3.6.1.4.1.890.1.5.8.14.23.5.1.10
traceRouteCtlPort
Specifies the UDP port to send the traceroute request to. Need to specify a port that is not in use at the destination (target) host. The default value for this object is the IA…
columnUDP Port Unsigned32.1.3.6.1.4.1.890.1.5.8.14.23.5.1.11
traceRouteCtlMaxTtl
Specifies the maximum time-to-live value.
columntime-to-live value Unsigned32.1.3.6.1.4.1.890.1.5.8.14.23.5.1.12
traceRouteCtlDSField
Specifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the traceroute probe. The DS Field is defined as the Type of Service (…
columnUnsigned32.1.3.6.1.4.1.890.1.5.8.14.23.5.1.13
traceRouteCtlSourceAddressType
Specifies the type of the source address, traceRouteCtlSourceAddress, to be used at a remote host when performing a traceroute operation.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.890.1.5.8.14.23.5.1.14
traceRouteCtlSourceAddress
Use the specified IP address (which must be given as an IP number, not a hostname) as the source address in outgoing probe packets. On hosts with more than one IP address, this op…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.890.1.5.8.14.23.5.1.15
traceRouteCtlIfIndex
Setting this object to an interface's ifIndex prior to starting a remote traceroute operation directs the traceroute probes to be transmitted over the specified interface. A valu…
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.890.1.5.8.14.23.5.1.16
traceRouteCtlMiscOptions
Enables an application to specify implementation dependent options.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.890.1.5.8.14.23.5.1.17
traceRouteCtlMaxFailures
The value of this object indicates the maximum number of consecutive timeouts allowed before terminating a remote traceroute request. A value of either 255 (maximum hop count/pos…
columntimeouts Unsigned32.1.3.6.1.4.1.890.1.5.8.14.23.5.1.18
traceRouteCtlDontFragment
This object enables setting of the don't fragment flag (DF) in the IP header for a probe. Use of this object enables performing a manual PATH MTU test.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.890.1.5.8.14.23.5.1.19
traceRouteCtlServInstId
The ID of the service instance that this traceRoute entry belong to. This item would be used as an index
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.890.1.5.8.14.23.5.1.2
traceRouteCtlInitialTtl
The value of this object specifies the initial TTL value to use. This enables bypassing the initial (often well known) portion of a path.
columnUnsigned32.1.3.6.1.4.1.890.1.5.8.14.23.5.1.20
traceRouteCtlFrequency
The number of seconds to wait before repeating a traceroute test as defined by the value of the various objects in the corresponding row. The number of hops in a single traceroute…
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.890.1.5.8.14.23.5.1.21
traceRouteCtlStorageType
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
columnSNMPv2-TCStorageType.1.3.6.1.4.1.890.1.5.8.14.23.5.1.22
traceRouteCtlAdminStatus
Reflects the desired state that an traceRouteCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this traceRouteCtlEntry. disabl…
columnEnumeration.1.3.6.1.4.1.890.1.5.8.14.23.5.1.23
traceRouteCtlDescr
The purpose of this object is to provide a descriptive name of the remote traceroute test.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.890.1.5.8.14.23.5.1.24
traceRouteCtlMaxRows
The maximum number of entries allowed in the traceRouteProbeHistoryTable. An implementation of this MIB will remove the oldest entry in the traceRouteProbeHistoryTable to allow t…
columnrows SNMPv2-SMIUnsigned32.1.3.6.1.4.1.890.1.5.8.14.23.5.1.25
traceRouteCtlTrapGeneration
The value of this object determines when and if to to generate a notification for this entry: pathChange(0) - Generate a traceRoutePathChange notification when the current…
columnBits.1.3.6.1.4.1.890.1.5.8.14.23.5.1.26
traceRouteCtlCreateHopsEntries
The current path for a traceroute test is kept in the traceRouteHopsTable on a per hop basis when the value of this object is true(1).
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.890.1.5.8.14.23.5.1.27
traceRouteCtlType
The value of this object is used either to report or select the implementation method to be used for performing a traceroute operation. The value of this object may be selected fr…
columnObjectIdentifier.1.3.6.1.4.1.890.1.5.8.14.23.5.1.28
traceRouteCtlOwnerIndex
To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 2575, VACM) for tables in which multiple users may need…
columnOctetString.1.3.6.1.4.1.890.1.5.8.14.23.5.1.3
traceRouteCtlTestName
The name of a traceroute test. This is locally unique, within the scope of an traceRouteCtlOwnerIndex.
columnOctetString.1.3.6.1.4.1.890.1.5.8.14.23.5.1.4
traceRouteCtlTargetAddressType
Specifies the type of host address to be used on the traceroute request at the remote host.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.890.1.5.8.14.23.5.1.5
traceRouteCtlTargetAddress
Specifies the host address used on the traceroute request at the remote host. The host address type can be determined by the examining the value of the corresponding traceRouteCt…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.890.1.5.8.14.23.5.1.6
traceRouteCtlByPassRouteTable
The purpose of this object is to optionally enable bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.890.1.5.8.14.23.5.1.7
traceRouteCtlDataSize
Specifies the size of the data portion of a traceroute request in octets. A traceroute request is essentially transmitted by encoding a UDP datagram into a IP packet. So subtract…
columnoctets Unsigned32.1.3.6.1.4.1.890.1.5.8.14.23.5.1.8
traceRouteCtlTimeOut
Specifies the time-out value, in seconds, for a traceroute request.
columnseconds Unsigned32.1.3.6.1.4.1.890.1.5.8.14.23.5.1.9