traceRouteCtlFrequency

ZYXEL-ES3124PWR-MIB · .1.3.6.1.4.1.890.1.5.8.14.23.5.1.21
MIB view Table view

Object

column r/w seconds SNMPv2-SMIUnsigned32 
The number of seconds to wait before repeating a
traceroute test as defined by the value of the
various objects in the corresponding row.
The number of hops in a single traceroute test
is determined by the value of the corresponding
traceRouteCtlProbesPerHop object.  After a
single test completes the number of seconds as defined
by the value of traceRouteCtlFrequency MUST elapse
before the next traceroute test is started.
A value of 0 for this object implies that the test
as defined by the corresponding entry will not be
repeated.

Context

MIB
ZYXEL-ES3124PWR-MIB
OID
.1.3.6.1.4.1.890.1.5.8.14.23.5.1.21
Type
column
Access
readwrite
Status
current
Units
seconds
Parent
traceRouteCtlEntry
Table
traceRouteCtlTable
Siblings
28

Syntax

seconds SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
traceRouteCtlServInstType
The type of the service instance that this traceRoute entry belong to. 1: VLAN. This item would be used as an index
columnEnumeration.1.3.6.1.4.1.890.1.5.8.14.23.5.1.1
traceRouteCtlProbesPerHop
Specifies the number of times to reissue a traceroute request with the same time-to-live (TTL) value.
columnprobes Unsigned32.1.3.6.1.4.1.890.1.5.8.14.23.5.1.10
traceRouteCtlPort
Specifies the UDP port to send the traceroute request to. Need to specify a port that is not in use at the destination (target) host. The default value for this object is the IA…
columnUDP Port Unsigned32.1.3.6.1.4.1.890.1.5.8.14.23.5.1.11
traceRouteCtlMaxTtl
Specifies the maximum time-to-live value.
columntime-to-live value Unsigned32.1.3.6.1.4.1.890.1.5.8.14.23.5.1.12
traceRouteCtlDSField
Specifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the traceroute probe. The DS Field is defined as the Type of Service (…
columnUnsigned32.1.3.6.1.4.1.890.1.5.8.14.23.5.1.13
traceRouteCtlSourceAddressType
Specifies the type of the source address, traceRouteCtlSourceAddress, to be used at a remote host when performing a traceroute operation.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.890.1.5.8.14.23.5.1.14
traceRouteCtlSourceAddress
Use the specified IP address (which must be given as an IP number, not a hostname) as the source address in outgoing probe packets. On hosts with more than one IP address, this op…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.890.1.5.8.14.23.5.1.15
traceRouteCtlIfIndex
Setting this object to an interface's ifIndex prior to starting a remote traceroute operation directs the traceroute probes to be transmitted over the specified interface. A valu…
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.890.1.5.8.14.23.5.1.16
traceRouteCtlMiscOptions
Enables an application to specify implementation dependent options.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.890.1.5.8.14.23.5.1.17
traceRouteCtlMaxFailures
The value of this object indicates the maximum number of consecutive timeouts allowed before terminating a remote traceroute request. A value of either 255 (maximum hop count/pos…
columntimeouts Unsigned32.1.3.6.1.4.1.890.1.5.8.14.23.5.1.18
traceRouteCtlDontFragment
This object enables setting of the don't fragment flag (DF) in the IP header for a probe. Use of this object enables performing a manual PATH MTU test.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.890.1.5.8.14.23.5.1.19
traceRouteCtlServInstId
The ID of the service instance that this traceRoute entry belong to. This item would be used as an index
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.890.1.5.8.14.23.5.1.2
traceRouteCtlInitialTtl
The value of this object specifies the initial TTL value to use. This enables bypassing the initial (often well known) portion of a path.
columnUnsigned32.1.3.6.1.4.1.890.1.5.8.14.23.5.1.20
traceRouteCtlStorageType
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
columnSNMPv2-TCStorageType.1.3.6.1.4.1.890.1.5.8.14.23.5.1.22
traceRouteCtlAdminStatus
Reflects the desired state that an traceRouteCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this traceRouteCtlEntry. disabl…
columnEnumeration.1.3.6.1.4.1.890.1.5.8.14.23.5.1.23
traceRouteCtlDescr
The purpose of this object is to provide a descriptive name of the remote traceroute test.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.890.1.5.8.14.23.5.1.24
traceRouteCtlMaxRows
The maximum number of entries allowed in the traceRouteProbeHistoryTable. An implementation of this MIB will remove the oldest entry in the traceRouteProbeHistoryTable to allow t…
columnrows SNMPv2-SMIUnsigned32.1.3.6.1.4.1.890.1.5.8.14.23.5.1.25
traceRouteCtlTrapGeneration
The value of this object determines when and if to to generate a notification for this entry: pathChange(0) - Generate a traceRoutePathChange notification when the current…
columnBits.1.3.6.1.4.1.890.1.5.8.14.23.5.1.26
traceRouteCtlCreateHopsEntries
The current path for a traceroute test is kept in the traceRouteHopsTable on a per hop basis when the value of this object is true(1).
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.890.1.5.8.14.23.5.1.27
traceRouteCtlType
The value of this object is used either to report or select the implementation method to be used for performing a traceroute operation. The value of this object may be selected fr…
columnObjectIdentifier.1.3.6.1.4.1.890.1.5.8.14.23.5.1.28
traceRouteCtlRowStatus
This object allows entries to be created and deleted in the traceRouteCtlTable. Deletion of an entry in this table results in all corresponding (same traceRouteCtlOwnerIndex and …
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.890.1.5.8.14.23.5.1.29
traceRouteCtlOwnerIndex
To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 2575, VACM) for tables in which multiple users may need…
columnOctetString.1.3.6.1.4.1.890.1.5.8.14.23.5.1.3
traceRouteCtlTestName
The name of a traceroute test. This is locally unique, within the scope of an traceRouteCtlOwnerIndex.
columnOctetString.1.3.6.1.4.1.890.1.5.8.14.23.5.1.4
traceRouteCtlTargetAddressType
Specifies the type of host address to be used on the traceroute request at the remote host.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.890.1.5.8.14.23.5.1.5
traceRouteCtlTargetAddress
Specifies the host address used on the traceroute request at the remote host. The host address type can be determined by the examining the value of the corresponding traceRouteCt…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.890.1.5.8.14.23.5.1.6
traceRouteCtlByPassRouteTable
The purpose of this object is to optionally enable bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.890.1.5.8.14.23.5.1.7
traceRouteCtlDataSize
Specifies the size of the data portion of a traceroute request in octets. A traceroute request is essentially transmitted by encoding a UDP datagram into a IP packet. So subtract…
columnoctets Unsigned32.1.3.6.1.4.1.890.1.5.8.14.23.5.1.8
traceRouteCtlTimeOut
Specifies the time-out value, in seconds, for a traceroute request.
columnseconds Unsigned32.1.3.6.1.4.1.890.1.5.8.14.23.5.1.9