zyAclV2PolicyOutgoingAction

ZYXEL-AclV2-MIB · .1.3.6.1.4.1.890.1.15.3.105.2.1.1.14
MIB view Table view

Object

column Bits 
There are four outgoing actions for policy rule. 
'Send the packet to the mirror port' is sent the packet to the mirror port. 
'Send the packet to the egress port' is sent the packet to the egress port. 
'Send the matching frames to the egress port' is sent the matching policy rule frames to the egress port. 
'Set the packets VLAN ID' is set packet with tag.

Context

MIB
ZYXEL-AclV2-MIB
OID
.1.3.6.1.4.1.890.1.15.3.105.2.1.1.14
Type
column
Access
readonly
Status
current
Parent
zyxelAclV2PolicyEntry
Table
zyxelAclV2PolicyTable
Siblings
17

Syntax

Bits

Values & Constraints

Enumerated Values
0sendThePacketToTheMirrorPort
1sendThePacketToTheEgressPort
2sendTheMatchingFramesToTheEgressPort
3setThePacketVlanId

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
zyAclV2PolicyName
The name of policy rule is used for identifying purposes.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.890.1.15.3.105.2.1.1.1
zyAclV2PolicyOutOfProfileDSCP
Specify a new DSCP number (between 0 and 63) for policy rule if you want to replace or remark the DSCP number for out-of-profile traffic.
columnInteger32.1.3.6.1.4.1.890.1.15.3.105.2.1.1.10
zyAclV2PolicyForwardingAction
There are three forwarding actions for policy rule. 'No change' is forward the packets. 'Discard the packet' is drop the packets. 'Do not drop the matching frame previously mark…
columnEnumeration.1.3.6.1.4.1.890.1.15.3.105.2.1.1.11
zyAclV2PolicyPriorityAction
There are four priority actions for policy rule. 'No change' is keep the priority setting of the frames. 'Set the packet's 802.1 priority' is replace the packet's 802.1 priority f…
columnEnumeration.1.3.6.1.4.1.890.1.15.3.105.2.1.1.12
zyAclV2PolicyDiffServAction
There are four DiffServ actions for policy rule. 'No change' is keeping the TOS and/or DSCP fields in the packets. 'Set the packet's TOS field' is set the TOS field with the val…
columnEnumeration.1.3.6.1.4.1.890.1.15.3.105.2.1.1.13
zyAclV2PolicyMeteringState
Enable/Disable bandwidth limitation on the traffic flow(s) then set the actions to be taken on out-of-profile packets.
columnInteger32.1.3.6.1.4.1.890.1.15.3.105.2.1.1.15
zyAclV2PolicyOutOfProfileAction
There are four out of profile actions for policy rule. 'Drop the packet' is discard the out-of-profile traffic. 'Change the DSCP value' is replace the DSCP field with the value …
columnBits.1.3.6.1.4.1.890.1.15.3.105.2.1.1.16
zyAclV2PolicyRowstatus
This object shows the entry of policy rule status.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.890.1.15.3.105.2.1.1.17
zyAclV2PolicyQueueAction
There are two queue actions for policy rule. 'No change' is keep the priority setting of the frames. 'Send the packet to priority queue' is put the packets in the designated queue.
columnEnumeration.1.3.6.1.4.1.890.1.15.3.105.2.1.1.18
zyAclV2PolicyState
Enable/Disable policy rule on this switch.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.890.1.15.3.105.2.1.1.2
zyAclV2PolicyClassifier
The classifier(s) applies in this policy rule.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.890.1.15.3.105.2.1.1.3
zyAclV2PolicyVid
VLAN ID for policy rule.
columnInteger32.1.3.6.1.4.1.890.1.15.3.105.2.1.1.4
zyAclV2PolicyEgressPort
The outgoing port number in this policy rule.
columnInteger32.1.3.6.1.4.1.890.1.15.3.105.2.1.1.5
zyAclV2Policy8021pPriority
Specify a 802.1p priority level for policy rule. The value of 802.1p is between 0 and 7.
columnInteger32.1.3.6.1.4.1.890.1.15.3.105.2.1.1.6
zyAclV2PolicyDSCP
Specify a DSCP (DiffServ Code Point) for policy rule. DSCP number is between 0 and 63.
columnInteger32.1.3.6.1.4.1.890.1.15.3.105.2.1.1.7
zyAclV2PolicyTOS
Specify the type of service (TOS) priority level for policy rule. The value of TOS is between 0 and 7.
columnInteger32.1.3.6.1.4.1.890.1.15.3.105.2.1.1.8
zyAclV2PolicyBandwidth
Specify the bandwidth for policy rule in kilobit per second (Kbps).
columnInteger32.1.3.6.1.4.1.890.1.15.3.105.2.1.1.9