zyAclV2PolicyMeteringState
ZYXEL-AclV2-MIB ·
.1.3.6.1.4.1.890.1.15.3.105.2.1.1.15
Object
column
Integer32
Enable/Disable bandwidth limitation on the traffic flow(s) then set the actions to be taken on out-of-profile packets.
Context
- MIB
- ZYXEL-AclV2-MIB
- OID
.1.3.6.1.4.1.890.1.15.3.105.2.1.1.15- Type
- column
- Access
- readonly
- Status
- current
- Parent
- zyxelAclV2PolicyEntry
- Table
- zyxelAclV2PolicyTable
- Siblings
- 17
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zyAclV2PolicyName The name of policy rule is used for identifying purposes. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.890.1.15.3.105.2.1.1.1 |
| zyAclV2PolicyOutOfProfileDSCP Specify a new DSCP number (between 0 and 63) for policy rule if you want to replace or remark the DSCP number for out-of-profile traffic. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.105.2.1.1.10 |
| zyAclV2PolicyForwardingAction There are three forwarding actions for policy rule. 'No change' is forward the packets. 'Discard the packet' is drop the packets.
'Do not drop the matching frame previously mark… | column | Enumeration | .1.3.6.1.4.1.890.1.15.3.105.2.1.1.11 |
| zyAclV2PolicyPriorityAction There are four priority actions for policy rule. 'No change' is keep the priority setting of the frames.
'Set the packet's 802.1 priority' is replace the packet's 802.1 priority f… | column | Enumeration | .1.3.6.1.4.1.890.1.15.3.105.2.1.1.12 |
| zyAclV2PolicyDiffServAction There are four DiffServ actions for policy rule.
'No change' is keeping the TOS and/or DSCP fields in the packets.
'Set the packet's TOS field' is set the TOS field with the val… | column | Enumeration | .1.3.6.1.4.1.890.1.15.3.105.2.1.1.13 |
| zyAclV2PolicyOutgoingAction There are four outgoing actions for policy rule.
'Send the packet to the mirror port' is sent the packet to the mirror port.
'Send the packet to the egress port' is sent the pac… | column | Bits | .1.3.6.1.4.1.890.1.15.3.105.2.1.1.14 |
| zyAclV2PolicyOutOfProfileAction There are four out of profile actions for policy rule.
'Drop the packet' is discard the out-of-profile traffic.
'Change the DSCP value' is replace the DSCP field with the value … | column | Bits | .1.3.6.1.4.1.890.1.15.3.105.2.1.1.16 |
| zyAclV2PolicyRowstatus This object shows the entry of policy rule status. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.890.1.15.3.105.2.1.1.17 |
| zyAclV2PolicyQueueAction There are two queue actions for policy rule. 'No change' is keep the priority setting of the frames.
'Send the packet to priority queue' is put the packets in the designated queue. | column | Enumeration | .1.3.6.1.4.1.890.1.15.3.105.2.1.1.18 |
| zyAclV2PolicyState Enable/Disable policy rule on this switch. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.890.1.15.3.105.2.1.1.2 |
| zyAclV2PolicyClassifier The classifier(s) applies in this policy rule. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.890.1.15.3.105.2.1.1.3 |
| zyAclV2PolicyVid VLAN ID for policy rule. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.105.2.1.1.4 |
| zyAclV2PolicyEgressPort The outgoing port number in this policy rule. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.105.2.1.1.5 |
| zyAclV2Policy8021pPriority Specify a 802.1p priority level for policy rule. The value of 802.1p is between 0 and 7. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.105.2.1.1.6 |
| zyAclV2PolicyDSCP Specify a DSCP (DiffServ Code Point) for policy rule. DSCP number is between 0 and 63. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.105.2.1.1.7 |
| zyAclV2PolicyTOS Specify the type of service (TOS) priority level for policy rule. The value of TOS is between 0 and 7. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.105.2.1.1.8 |
| zyAclV2PolicyBandwidth Specify the bandwidth for policy rule in kilobit per second (Kbps). | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.105.2.1.1.9 |