accessSwitchDSLConfProfileName
ZYXEL-AS-MIB ·
.1.3.6.1.4.1.890.1.5.1.1.18
Object
scalar
r/w
OctetString
The DSL profile name
Context
- MIB
- ZYXEL-AS-MIB
- OID
.1.3.6.1.4.1.890.1.5.1.1.18- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- accessSwitchMgnt
- Siblings
- 28
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-31
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| accessSwitchSystemCurrentStatus This variable indicates the status of the system.
The sysCurrentStatus is a bit map represented
as a sum, therefore, it can represent multiple defects
simultaneously. The sysNoDef… | scalar | Integer32 | .1.3.6.1.4.1.890.1.5.1.1.1 |
| acccessSwitchChassisId The chassis Id of the module | scalar | Integer32 | .1.3.6.1.4.1.890.1.5.1.1.10 |
| accessSwitchSlotId The slot Id of the module | scalar | ASSlotNum | .1.3.6.1.4.1.890.1.5.1.1.11 |
| accessSwitchModuleType The type of the module | scalar | ASModuleType | .1.3.6.1.4.1.890.1.5.1.1.12 |
| accessSwitchFWVersion The firmware version of the access switch. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.890.1.5.1.1.13 |
| accessSwitchDriverVersion The driver version of the access port in this access switch | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.890.1.5.1.1.14 |
| accessSwitchModemCodeVersion The modem code version of the access port in this access switch | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.890.1.5.1.1.15 |
| accessSwitchDSLConfOps The managed object is for xDSL line configuration. When the EMS
wants to issue the desired operation, the EMS
shall send SNMP-SET message to set the corresponding bit value
to be… | scalar | Integer32 | .1.3.6.1.4.1.890.1.5.1.1.16 |
| accessSwitchDSLConfTarget The managed object is used for identify the target on which
the line configuration should be performed. The target is encoded
as:
Byte 1~4: reserved
Byte 5~7: each octet specifi… | scalar | OctetString | .1.3.6.1.4.1.890.1.5.1.1.17 |
| accessSwitchDSLConfMode The DSL mode. The semantic for each bit is:
Bit 1: ADSL, G.lite
Bit 2: ADSL, G.dmt
Bit 3: ADSL, T1.413
Bit 4: ADSL, Auto | scalar | Integer32 | .1.3.6.1.4.1.890.1.5.1.1.19 |
| accessSwitchProblemCause The variable is the description of sytsem problem. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.890.1.5.1.1.2 |
| asPacketForwardingTable This table includes the configuration of packet forwarding. | table | - | .1.3.6.1.4.1.890.1.5.1.1.20 |
| asDhcpRelayEnable Enable/disable DHCP relay function. | scalar | Enumeration | .1.3.6.1.4.1.890.1.5.1.1.21 |
| asDhcpRelayOption82Enable Enable/disable the relay agent information option. | scalar | Enumeration | .1.3.6.1.4.1.890.1.5.1.1.22 |
| asDhcpRelayOption82Info User specific relay agent information. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.890.1.5.1.1.23 |
| asMaxNumOfDhcpServers The maximum number of DHCP servers. | scalar | Integer32 | .1.3.6.1.4.1.890.1.5.1.1.24 |
| asDhcpServerTable A table that contains DHCP server information. | table | - | .1.3.6.1.4.1.890.1.5.1.1.25 |
| asMaxNumberOfRadiusServers The max number of the RADIUS Servers. | scalar | Integer32 | .1.3.6.1.4.1.890.1.5.1.1.28 |
| asRadiusServerTable A table that contains Radius Server information. | table | - | .1.3.6.1.4.1.890.1.5.1.1.29 |
| accessSwitchSystemTemperature The variable is the current temperature in Celsius of the system. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.890.1.5.1.1.3 |
| asDot1xEnable Enable/disable the 802.1x function. | scalar | Enumeration | .1.3.6.1.4.1.890.1.5.1.1.30 |
| asDot1xPortTable This table includes the configuration of 802.1x. | table | - | .1.3.6.1.4.1.890.1.5.1.1.31 |
| accessSwitchFanRpmTable A table that contains rpm information about the fans. | table | - | .1.3.6.1.4.1.890.1.5.1.1.4 |
| accessSwitchVoltageTable A table that contains voltage information about the system. | table | - | .1.3.6.1.4.1.890.1.5.1.1.5 |
| accessSwitchSysTempTable A table that contains temperature information about system. | table | - | .1.3.6.1.4.1.890.1.5.1.1.6 |
| accessSwitchMaintenance The managed object is for system maintenance. When the EMS
wants to trigger the system maitenance operation, the EMS
shall send SNMP-SET message to set the corresponding bit value… | scalar | Integer32 | .1.3.6.1.4.1.890.1.5.1.1.7 |
| accessSwitchMaintenancePort The port which the maintenance operation should be performed on.
The value of 0 means the maintenance should be performed on the system. | scalar | Integer32 | .1.3.6.1.4.1.890.1.5.1.1.8 |
| accessSwitchMaxNumOfStaticVlans The maximum number of static VLANs which the system supports | scalar | Integer32 | .1.3.6.1.4.1.890.1.5.1.1.9 |