dot1agCfmMepHighestPrDefect

ZXR10-CFM-MIB · .1.3.6.1.4.1.3902.3.120.1.3.1.1.11
MIB view Table view

Object

column Dot1agCfmHighestDefectPri 
The highest priority defect that has been present since the
MEPs Fault Notification Generator State Machine was last in
the FNG_RESET state.

Context

MIB
ZXR10-CFM-MIB
OID
.1.3.6.1.4.1.3902.3.120.1.3.1.1.11
Type
column
Access
readonly
Status
current
Parent
dot1agCfmMepEntry
Table
dot1agCfmMepTable
Siblings
25

Syntax

Dot1agCfmHighestDefectPri
Source
Dot1agCfmHighestDefectPri
Base type
Enumeration

Values & Constraints

Type Values
0none
1defRDICCM
2defMACstatus
3defRemoteCCM
4defErrorCCM
5defXconCCM

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
dot1agCfmSessionId
Integer that is unique among all the MEPs in the same MA. Other definition is: a small integer, unique over a given Maintenance Association, identifying a specific Maintenance ass…
columnDot1agCfmSessionId.1.3.6.1.4.1.3902.3.120.1.3.1.1.1
dot1agCfmMepLowPrDef
An integer value specifying the lowest priority defect that is allowed to generate fault alarm.
columnDot1agCfmLowestAlarmPri.1.3.6.1.4.1.3902.3.120.1.3.1.1.10
dot1agCfmMepDefects
A vector of Boolean error conditions from Table 20-1, any of which may be true: DefRDICCM(0) DefMACstatus(1) DefRemoteCCM(2) DefErrorCCM(3) DefXconCCM(4)
columnDot1agCfmMepDefects.1.3.6.1.4.1.3902.3.120.1.3.1.1.12
dot1agCfmMepCciSentCcms
Total number of Continuity Check messages transmitted.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3902.3.120.1.3.1.1.13
dot1agCfmMepId
Session Id
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.3902.3.120.1.3.1.1.14
dot1agCfmMepMEPAttachType
MEP AttachType
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.3902.3.120.1.3.1.1.15
dot1agCfmMepTunnelId
Tunnel Id
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.3902.3.120.1.3.1.1.16
dot1agCfmMepLMFlage
LMFlage
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.3902.3.120.1.3.1.1.17
dot1agCfmMepDMFlage
DMFlage
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.3902.3.120.1.3.1.1.18
dot1agCfmMepPortName
Mep Port Name
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3902.3.120.1.3.1.1.19
dot1agCfmMepIfIndex
This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP is attached. Upon a restart of th…
columnInterfaceIndexOrZero.1.3.6.1.4.1.3902.3.120.1.3.1.1.2
dot1agCfmMepLbrIn
Total number of valid, in-order Loopback Replies received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3902.3.120.1.3.1.1.20
dot1agCfmMepLbrInOutOfOrder
The total number of valid, out-of-order Loopback Replies received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3902.3.120.1.3.1.1.21
dot1agCfmMepLbrBadMsdu
(optional) The total number of LBRs received whose mac_service_data_unit did not match (except for the OpCode) that of the corresponding LBM (20.2.3).
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3902.3.120.1.3.1.1.22
dot1agCfmMepLtmNextSeqNumber
Next transaction identifier/sequence number to be sent in a Linktrace message. This sequence number can be zero because it wraps around.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.3902.3.120.1.3.1.1.23
dot1agCfmMepUnexpLtrIn
The total number of unexpected LTRs received (20.39.1).
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3902.3.120.1.3.1.1.24
dot1agCfmMepLbrOut
Total number of Loopback Replies transmitted.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3902.3.120.1.3.1.1.25
dot1agCfmMepRowStatus
The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.3902.3.120.1.3.1.1.26
dot1agCfmMepDirection
The direction in which the MEP faces on the Bridge port.
columnDot1agCfmMpDirection.1.3.6.1.4.1.3902.3.120.1.3.1.1.3
dot1agCfmMepPrimaryVid
An integer indicating the Primary VID of the MEP, always one of the VIDs assigned to the MEP's MA. The value 0 indicates that either the Primary VID is that of the MEP's MA, or th…
columnUnsigned32.1.3.6.1.4.1.3902.3.120.1.3.1.1.4
dot1agCfmMepActive
Administrative state of the MEP A Boolean indicating the administrative state of the MEP. True indicates that the MEP is to function normally, and false that it is to cease functi…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.3902.3.120.1.3.1.1.5
dot1agCfmMepFngState
Current state of the MEP Fault Notification Generator State Machine.
columnDot1agCfmFngState.1.3.6.1.4.1.3902.3.120.1.3.1.1.6
dot1agCfmMepCciEnabled
If set to true, the MEP will generate CCM messages.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.3902.3.120.1.3.1.1.7
dot1agCfmMepCcmLtmPriority
The priority value for CCMs and LTMs transmitted by the MEP. Default Value in the highest priority value allowed to pass through the bridge port for any of this MEPs VIDs. The man…
columnUnsigned32.1.3.6.1.4.1.3902.3.120.1.3.1.1.8
dot1agCfmMepMacAddress
MAC address of the MEP.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.3902.3.120.1.3.1.1.9