dot1agCfmMepDefects
ZXR10-CFM-MIB ·
.1.3.6.1.4.1.3902.3.120.1.3.1.1.12
Object
column
Dot1agCfmMepDefects
A vector of Boolean error conditions from Table 20-1, any of which may be true: DefRDICCM(0) DefMACstatus(1) DefRemoteCCM(2) DefErrorCCM(3) DefXconCCM(4)
Context
- MIB
- ZXR10-CFM-MIB
- OID
.1.3.6.1.4.1.3902.3.120.1.3.1.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- dot1agCfmMepEntry
- Table
- dot1agCfmMepTable
- Siblings
- 25
Syntax
Dot1agCfmMepDefects
- Source
- Dot1agCfmMepDefects
- Base type
Bits
Values & Constraints
Type Values
0 | bDefRDICCM |
1 | bDefMACstatus |
2 | bDefRemoteCCM |
3 | bDefErrorCCM |
4 | bDefXconCCM |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dot1agCfmSessionId Integer that is unique among all the MEPs in the same MA.
Other definition is: a small integer, unique over a given
Maintenance Association, identifying a specific Maintenance
ass… | column | Dot1agCfmSessionId | .1.3.6.1.4.1.3902.3.120.1.3.1.1.1 |
| dot1agCfmMepLowPrDef An integer value specifying the lowest priority defect
that is allowed to generate fault alarm. | column | Dot1agCfmLowestAlarmPri | .1.3.6.1.4.1.3902.3.120.1.3.1.1.10 |
| dot1agCfmMepHighestPrDefect The highest priority defect that has been present since the
MEPs Fault Notification Generator State Machine was last in
the FNG_RESET state. | column | Dot1agCfmHighestDefectPri | .1.3.6.1.4.1.3902.3.120.1.3.1.1.11 |
| dot1agCfmMepCciSentCcms Total number of Continuity Check messages transmitted. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3902.3.120.1.3.1.1.13 |
| dot1agCfmMepId Session Id | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.3.120.1.3.1.1.14 |
| dot1agCfmMepMEPAttachType MEP AttachType | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.3.120.1.3.1.1.15 |
| dot1agCfmMepTunnelId Tunnel Id | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.3.120.1.3.1.1.16 |
| dot1agCfmMepLMFlage LMFlage | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.3.120.1.3.1.1.17 |
| dot1agCfmMepDMFlage DMFlage | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.3.120.1.3.1.1.18 |
| dot1agCfmMepPortName Mep Port Name | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3902.3.120.1.3.1.1.19 |
| dot1agCfmMepIfIndex This object is the interface index of the interface either a
bridge port, or an aggregated IEEE 802.1 link within a bridge
port, to which the MEP is attached.
Upon a restart of th… | column | InterfaceIndexOrZero | .1.3.6.1.4.1.3902.3.120.1.3.1.1.2 |
| dot1agCfmMepLbrIn Total number of valid, in-order Loopback Replies received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3902.3.120.1.3.1.1.20 |
| dot1agCfmMepLbrInOutOfOrder The total number of valid, out-of-order Loopback Replies
received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3902.3.120.1.3.1.1.21 |
| dot1agCfmMepLbrBadMsdu (optional) The total number of LBRs received whose
mac_service_data_unit did not match (except for the OpCode)
that of the corresponding LBM (20.2.3). | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3902.3.120.1.3.1.1.22 |
| dot1agCfmMepLtmNextSeqNumber Next transaction identifier/sequence number to be sent in a
Linktrace message. This sequence number can be zero because
it wraps around. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.3.120.1.3.1.1.23 |
| dot1agCfmMepUnexpLtrIn The total number of unexpected LTRs received (20.39.1). | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3902.3.120.1.3.1.1.24 |
| dot1agCfmMepLbrOut Total number of Loopback Replies transmitted. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3902.3.120.1.3.1.1.25 |
| dot1agCfmMepRowStatus The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.3.120.1.3.1.1.26 |
| dot1agCfmMepDirection The direction in which the MEP faces on the Bridge port. | column | Dot1agCfmMpDirection | .1.3.6.1.4.1.3902.3.120.1.3.1.1.3 |
| dot1agCfmMepPrimaryVid An integer indicating the Primary VID of the MEP, always
one of the VIDs assigned to the MEP's MA. The value 0
indicates that either the Primary VID is that of the
MEP's MA, or th… | column | Unsigned32 | .1.3.6.1.4.1.3902.3.120.1.3.1.1.4 |
| dot1agCfmMepActive Administrative state of the MEP
A Boolean indicating the administrative state of the MEP.
True indicates that the MEP is to function normally, and
false that it is to cease functi… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.3.120.1.3.1.1.5 |
| dot1agCfmMepFngState Current state of the MEP Fault Notification Generator
State Machine. | column | Dot1agCfmFngState | .1.3.6.1.4.1.3902.3.120.1.3.1.1.6 |
| dot1agCfmMepCciEnabled If set to true, the MEP will generate CCM messages. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.3.120.1.3.1.1.7 |
| dot1agCfmMepCcmLtmPriority The priority value for CCMs and LTMs transmitted by the MEP.
Default Value in the highest priority value allowed to pass
through the bridge port for any of this MEPs VIDs.
The man… | column | Unsigned32 | .1.3.6.1.4.1.3902.3.120.1.3.1.1.8 |
| dot1agCfmMepMacAddress MAC address of the MEP. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.3902.3.120.1.3.1.1.9 |