zxGponUniMacBPortAddrLearnDepth

ZXGPON-ONTMGMT-MIB · .1.3.6.1.4.1.3902.1012.3.50.15.3.1.12
MIB view Table view

Object

column r/w Integer32 
This attribute specifies the maximum number of MAC addresses 
to be learned by  this MAC bridge port. The default value 0 
specifies that there is no administratively-imposed limit.
(R, W, Set-by-create) (optional) (1 byte)

Context

MIB
ZXGPON-ONTMGMT-MIB
OID
.1.3.6.1.4.1.3902.1012.3.50.15.3.1.12
Type
column
Access
readwrite
Status
current
Parent
zxGponUNIMACBridgePortConfigEntry
Table
zxGponUNIMACBridgePortConfigTable
Siblings
13

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
zxGponUNIMACBridgePortConfigBridgeId
This attribute is set-by-create, indicating the bridge when create an UNI bridge port.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1012.3.50.15.3.1.1
zxGponUNIMACBridgePortConfigOutboundTDPtr
This attribute points to a GEM traffic descriptor that limits the traffic rate leaving the MAC bridge(2 byte)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1012.3.50.15.3.1.10
zxGponUNIMACBridgePortConfigInboundTDPtr
This attribute points to a GEM traffic descriptor that limits the traffic rate entering the MAC bridge(2 byte)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1012.3.50.15.3.1.11
zxGponUniMacBPortOutboundTdPrf
This name points to a GEM traffic descriptor that limits the traffic rate leaving the MAC bridge. It indicates no rate limiting when the length of value is 0.
columnOctetString.1.3.6.1.4.1.3902.1012.3.50.15.3.1.13
zxGponUniMacBPortInboundTdPrf
This name points to a GEM traffic descriptor that limits the traffic rate entering the MAC bridge. It indicates no rate limiting when the length of value is 0.
columnOctetString.1.3.6.1.4.1.3902.1012.3.50.15.3.1.14
zxGponUNIMACBridgePortConfigBridgePort
This attribute identifies the MAC bridge port associated with the port. The first 2 bytes stand for the slot and bridge group id; The second 2 bytes stand for the bridge port num.…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1012.3.50.15.3.1.2
zxGponUNIMACBridgePortConfigPortPrio
This attribute denotes the priority of the port. The range is 0x00 to 0x00FF (0 to 255).(2 bytes)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1012.3.50.15.3.1.3
zxGponUNIMACBridgePortConfigPortPathCost
This attribute provides the cost contribution of the port to the path cost towards the spanning tree root bridge. The range is 0x0001 to 0xFFFF (1 to 65535).(2 bytes)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1012.3.50.15.3.1.4
zxGponUNIMACBridgePortConfigPortSpanTreeInd
This Boolean attribute indicates whether or not STP LAN topology change detection is enabled at this port. The value TRUE means enabled.(1 byte)
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.3902.1012.3.50.15.3.1.5
zxGponUNIMACBridgePortConfigEncapMethod
This attribute identifies the frame encapsulation method that is used. 0x00: identification by ATM VC; 0x01: LLC encapsulation; This attribute is effective only for ports towards …
columnEnumeration.1.3.6.1.4.1.3902.1012.3.50.15.3.1.6
zxGponUNIMACBridgePortConfigLANFCSInd
This attribute indicates whether LAN FCS (Frame Check Sequence) bytes are forwarded (value 0x00) or discarded (value 0x01). This applies in both directions of transmission, and …
columnEnumeration.1.3.6.1.4.1.3902.1012.3.50.15.3.1.7
zxGponUNIMACBridgePortConfigPortMACAddr
This attribute indicates the Physical MAC address used by the Port as defined by the TPPointer when the TPType is set to LAN.(6 bytes)
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.3902.1012.3.50.15.3.1.8
zxGponUNIMACBridgePortConfigEntryStatus
This attribute indicates the Physical MAC address used by the Port as defined by the TPPointer when the TPType is set to LAN.(6 bytes)
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.3902.1012.3.50.15.3.1.9