zxGponUNIMACBridgePortConfigPortSpanTreeInd
ZXGPON-ONTMGMT-MIB ·
.1.3.6.1.4.1.3902.1012.3.50.15.3.1.5
Object
This Boolean attribute indicates whether or not STP LAN topology change detection is enabled at this port. The value TRUE means enabled.(1 byte)
Context
- MIB
- ZXGPON-ONTMGMT-MIB
- OID
.1.3.6.1.4.1.3902.1012.3.50.15.3.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zxGponUNIMACBridgePortConfigEntry
- Table
- zxGponUNIMACBridgePortConfigTable
- Siblings
- 13
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxGponUNIMACBridgePortConfigBridgeId This attribute is set-by-create, indicating the bridge when create an UNI bridge port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.15.3.1.1 |
| zxGponUNIMACBridgePortConfigOutboundTDPtr This attribute points to a GEM traffic descriptor that limits the traffic rate
leaving the MAC bridge(2 byte) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.15.3.1.10 |
| zxGponUNIMACBridgePortConfigInboundTDPtr This attribute points to a GEM traffic descriptor that limits the traffic rate
entering the MAC bridge(2 byte) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.15.3.1.11 |
| zxGponUniMacBPortAddrLearnDepth This attribute specifies the maximum number of MAC addresses
to be learned by this MAC bridge port. The default value 0
specifies that there is no administratively-imposed limi… | column | Integer32 | .1.3.6.1.4.1.3902.1012.3.50.15.3.1.12 |
| zxGponUniMacBPortOutboundTdPrf This name points to a GEM traffic descriptor that limits
the traffic rate leaving the MAC bridge.
It indicates no rate limiting when the length of value is 0. | column | OctetString | .1.3.6.1.4.1.3902.1012.3.50.15.3.1.13 |
| zxGponUniMacBPortInboundTdPrf This name points to a GEM traffic descriptor that limits
the traffic rate entering the MAC bridge.
It indicates no rate limiting when the length of value is 0. | column | OctetString | .1.3.6.1.4.1.3902.1012.3.50.15.3.1.14 |
| zxGponUNIMACBridgePortConfigBridgePort This attribute identifies the MAC bridge port associated with the port.
The first 2 bytes stand for the slot and bridge group id;
The second 2 bytes stand for the bridge port num.… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.15.3.1.2 |
| zxGponUNIMACBridgePortConfigPortPrio This attribute denotes the priority of the port.
The range is 0x00 to 0x00FF (0 to 255).(2 bytes) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.15.3.1.3 |
| zxGponUNIMACBridgePortConfigPortPathCost This attribute provides the cost contribution of the port to the path cost
towards the spanning tree root bridge. The range is 0x0001 to 0xFFFF (1 to 65535).(2 bytes) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.15.3.1.4 |
| zxGponUNIMACBridgePortConfigEncapMethod This attribute identifies the frame encapsulation method that is used.
0x00: identification by ATM VC;
0x01: LLC encapsulation;
This attribute is effective only for ports towards … | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.15.3.1.6 |
| zxGponUNIMACBridgePortConfigLANFCSInd This attribute indicates whether LAN FCS (Frame Check Sequence) bytes are
forwarded (value 0x00) or discarded (value 0x01). This applies in both directions of
transmission, and … | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.15.3.1.7 |
| zxGponUNIMACBridgePortConfigPortMACAddr This attribute indicates the Physical MAC address used by the Port as defined by
the TPPointer when the TPType is set to LAN.(6 bytes) | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.3902.1012.3.50.15.3.1.8 |
| zxGponUNIMACBridgePortConfigEntryStatus This attribute indicates the Physical MAC address used by the Port as defined by
the TPPointer when the TPType is set to LAN.(6 bytes) | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1012.3.50.15.3.1.9 |