zxGponPptpEthUNIIfSpeedConfig
ZXGPON-ONTMGMT-MIB ·
.1.3.6.1.4.1.3902.1012.3.50.14.1.1.3
Object
column
r/w
Enumeration
For 10/100 Base-Tx Ethernet interfaces, this attribute is used to set the configuration options: Auto-sensing: 0x00; 10BaseT: 0x01; 100BaseT: 0x02: Gigabit Ethernet: 0x03; 10BaseT Auto-sensing: 0x10; 10BaseT (half duplex): 0x11; 100BaseT (half duplex): 0x12; Gigabit Ethernet (half duplex): 0x13; Gigabit Ethernet Auto-sensing: 0x20. Upon autonomous instantiation, the value 0x00 is used.(1 byte)
Context
- MIB
- ZXGPON-ONTMGMT-MIB
- OID
.1.3.6.1.4.1.3902.1012.3.50.14.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zxGponPptpEthUNIEntry
- Table
- zxGponPptpEthUNITable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | auto |
2 | half10 |
3 | full10 |
4 | half100 |
5 | full100 |
6 | full1000 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxGponPptpEthUNIExpectedType The following coding is used for this attribute: 0x00 = by autosensing,
0x01 to 0xFE (1 to 254) = one of the values from Table 3 that is compatible with the
type of the LIM. Upo… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.14.1.1.1 |
| zxGponPptpEthUNIPauseTime This attribute allows the ONT line card to request that the customer terminal temporarily
suspend sending data. Units are in 'pause_quanta' (1 pause_quantum equals 512 bits times… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.14.1.1.10 |
| zxGponPptpEthUNIBridgeOrIpInd This attribute indicates whether the Ethernet interface is bridged or derived from an
IP router function (Bridged: 0x00; IP router: 0x01; 0x02: depends on Circuit Pack.)
0x02 me… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.14.1.1.11 |
| zxGponPptpEthUNIARC This attribute is used to control alarm reporting from this managed entity.
See I.1.8 for a complete description.(1 byte) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.14.1.1.12 |
| zxGponPptpEthUNIARCInterval This attribute provides a provisionable length of time. See I.1.8 for a complete description.(1 byte) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.14.1.1.13 |
| zxGponPptpEthUNIPPPoEFilter This attribute may be used to control filtering of PPPoE packets on this Ethernet port.
The value 0x00 is used to disable filtering. The value 0x01 is used to enable filtering.
… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.14.1.1.14 |
| zxGponPptpEthUNIPowerControl This attribute controls whether power is provided to an external equipment over the
Ethernet PPTP. Value 0x01 enables power over Ethernet.
The default value 0x00 disables power … | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.14.1.1.15 |
| zxGponPptpEthUNISensedType If the value of 'Expected type' is not equal to 0x00, then the value of 'Sensed type'
equals the value of 'Expected type'. If the value of 'Expected type' equals 0x00, then
the … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.14.1.1.2 |
| zxGponPptpEthUNIEthLookbackConfig This attribute is used to set the Ethernet loopback configuration:
No loopback (value 0x00), Loop3 (value 0x03, Loopback of downstream traffic after PHY transceiver).
Upon autono… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.14.1.1.4 |
| zxGponPptpEthUNIAdminState This attribute is used to activate (unlock: value 0x00) and deactivate (lock: value 0x01)
the functions performed by instances of this managed entity.(1 byte) | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.14.1.1.5 |
| zxGponPptpEthUNIOperState This attribute indicates whether or not this managed entity is capable of performing
its task. The operational state reflects the perceived ability to receive or to generate
a v… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.14.1.1.6 |
| zxGponPptpEthUNIIfSpeedStatus This attribute indicates the configuration status of the Ethernet UNI.
10BaseT (full duplex): 0x01;
100BaseT (full duplex): 0x02;
Gigabit Ethernet (full duplex): 0x03;
10BaseT… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.14.1.1.7 |
| zxGponPptpEthUNIMaxFrameSize This attribute denotes the maximum allowed frame size to be transmitted across this interface.
Upon autonomous instantiation, the value 1518 is used.(2 bytes) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.14.1.1.8 |
| zxGponPptpEthUNIDteOrDceInd This attribute indicates whether the Ethernet interface wiring is DTE or DCE (DCE: 0x00; DTE: 0x01).
Upon autonomous instantiation, the value 0x00 is used.(1 byte) | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.14.1.1.9 |