zxGponPptpEthUNIExpectedType

ZXGPON-ONTMGMT-MIB · .1.3.6.1.4.1.3902.1012.3.50.14.1.1.1
MIB view Table view

Object

column r/w SNMPv2-SMIInteger32 
The following coding is used for this attribute: 0x00 = by autosensing, 
0x01 to 0xFE (1 to 254) = one of the values from Table 3 that is compatible with the 
type of the LIM. Upon autonomous instantiation, the value 0x00 is used.(1 byte)

Context

MIB
ZXGPON-ONTMGMT-MIB
OID
.1.3.6.1.4.1.3902.1012.3.50.14.1.1.1
Type
column
Access
readwrite
Status
current
Parent
zxGponPptpEthUNIEntry
Table
zxGponPptpEthUNITable
Siblings
14

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
zxGponPptpEthUNIPauseTime
This attribute allows the ONT line card to request that the customer terminal temporarily suspend sending data. Units are in 'pause_quanta' (1 pause_quantum equals 512 bits times…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1012.3.50.14.1.1.10
zxGponPptpEthUNIBridgeOrIpInd
This attribute indicates whether the Ethernet interface is bridged or derived from an IP router function (Bridged: 0x00; IP router: 0x01; 0x02: depends on Circuit Pack.) 0x02 me…
columnEnumeration.1.3.6.1.4.1.3902.1012.3.50.14.1.1.11
zxGponPptpEthUNIARC
This attribute is used to control alarm reporting from this managed entity. See I.1.8 for a complete description.(1 byte)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1012.3.50.14.1.1.12
zxGponPptpEthUNIARCInterval
This attribute provides a provisionable length of time. See I.1.8 for a complete description.(1 byte)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1012.3.50.14.1.1.13
zxGponPptpEthUNIPPPoEFilter
This attribute may be used to control filtering of PPPoE packets on this Ethernet port. The value 0x00 is used to disable filtering. The value 0x01 is used to enable filtering. …
columnEnumeration.1.3.6.1.4.1.3902.1012.3.50.14.1.1.14
zxGponPptpEthUNIPowerControl
This attribute controls whether power is provided to an external equipment over the Ethernet PPTP. Value 0x01 enables power over Ethernet. The default value 0x00 disables power …
columnEnumeration.1.3.6.1.4.1.3902.1012.3.50.14.1.1.15
zxGponPptpEthUNISensedType
If the value of 'Expected type' is not equal to 0x00, then the value of 'Sensed type' equals the value of 'Expected type'. If the value of 'Expected type' equals 0x00, then the …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1012.3.50.14.1.1.2
zxGponPptpEthUNIIfSpeedConfig
For 10/100 Base-Tx Ethernet interfaces, this attribute is used to set the configuration options: Auto-sensing: 0x00; 10BaseT: 0x01; 100BaseT: 0x02: Gigabit Ethernet: 0x03; 1…
columnEnumeration.1.3.6.1.4.1.3902.1012.3.50.14.1.1.3
zxGponPptpEthUNIEthLookbackConfig
This attribute is used to set the Ethernet loopback configuration: No loopback (value 0x00), Loop3 (value 0x03, Loopback of downstream traffic after PHY transceiver). Upon autono…
columnEnumeration.1.3.6.1.4.1.3902.1012.3.50.14.1.1.4
zxGponPptpEthUNIAdminState
This attribute is used to activate (unlock: value 0x00) and deactivate (lock: value 0x01) the functions performed by instances of this managed entity.(1 byte)
columnEnumeration.1.3.6.1.4.1.3902.1012.3.50.14.1.1.5
zxGponPptpEthUNIOperState
This attribute indicates whether or not this managed entity is capable of performing its task. The operational state reflects the perceived ability to receive or to generate a v…
columnEnumeration.1.3.6.1.4.1.3902.1012.3.50.14.1.1.6
zxGponPptpEthUNIIfSpeedStatus
This attribute indicates the configuration status of the Ethernet UNI. 10BaseT (full duplex): 0x01; 100BaseT (full duplex): 0x02; Gigabit Ethernet (full duplex): 0x03; 10BaseT…
columnEnumeration.1.3.6.1.4.1.3902.1012.3.50.14.1.1.7
zxGponPptpEthUNIMaxFrameSize
This attribute denotes the maximum allowed frame size to be transmitted across this interface. Upon autonomous instantiation, the value 1518 is used.(2 bytes)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1012.3.50.14.1.1.8
zxGponPptpEthUNIDteOrDceInd
This attribute indicates whether the Ethernet interface wiring is DTE or DCE (DCE: 0x00; DTE: 0x01). Upon autonomous instantiation, the value 0x00 is used.(1 byte)
columnEnumeration.1.3.6.1.4.1.3902.1012.3.50.14.1.1.9