zxAnXdsl2UsDataRatePrfRowStatus
ZTE-AN-XDSL2-MIBII ·
.1.3.6.1.4.1.3902.1015.1001.1.3.11.1.80
Object
This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated
ports.
Context
- MIB
- ZTE-AN-XDSL2-MIBII
- OID
.1.3.6.1.4.1.3902.1015.1001.1.3.11.1.80- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zxAnXdsl2UsDataRateConfPrfEntry
- Table
- zxAnXdsl2UsDataRateConfPrfTable
- Siblings
- 10
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnXdsl2UsDataRateConfPrfName This object identifies a row in this table. | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.3.11.1.1 |
| zxAnXdsl2ChConfMinSosBitRateUs This parameter specifies the minimum net data rate required for a
valid SOS request in the upstream direction.
The value shall be coded as an unsigned integer representing the
d… | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.11.1.10 |
| zxAnXdsl2ChConfChannRaRatioUs Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #1 when performing rate
adaptation on Upstream. The ratio refers to the availabl… | column | percents Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.11.1.2 |
| zxAnXdsl2ChConfMinDataRateUs Minimum Data Rate on Upstream direction. The minimum net
data rate for the bearer channel, coded in bit/s. | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.11.1.3 |
| zxAnXdsl2ChConfMaxDataRateUs Maximum Data Rate on Upstream direction. The maximum net
data rate for the bearer channel, coded in bit/s. | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.11.1.4 |
| zxAnXdsl2ChConfMinResRateUs Minimum Reserved Data Rate on Upstream direction. The minimum
reserved net data rate for the bearer channel, coded in
bit/s. This parameter is used only if the Rate Adaptation
M… | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.11.1.5 |
| zxAnXdsl2ChConfMinRateLowPwrUs Minimum Data Rate in Low Power state on upstream direction.
The minimum net data rate for the bearer channel, coded in
bit/s., during the low power state (L1 in G.992.2, L2 in
G.9… | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.11.1.6 |
| zxAnXdsl2ChConfMaxBerUs Maximum Bit Error Ratio on Upstream direction. The maximum
bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7):
eminu… | column | VDSL2-LINE-TC-MIBXdsl2MaxBer | .1.3.6.1.4.1.3902.1015.1001.1.3.11.1.7 |
| zxAnXdsl2ChConfDsDataRateUs Data Rate Threshold Downshift for upstream direction. A
'Down-shift rate change' event is triggered when the
actual
upstream data rate is below the data rate at the last entry
in… | column | bits/second Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.11.1.8 |
| zxAnXdsl2ChConfUsDataRateUs Data Rate Threshold Up shift for upstream direction. An
'Up-shift rate change' event is triggered when the
actual
upstream data rate exceeds, by more than the threshold, the
data… | column | bits/second Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.11.1.9 |