zxAnXdsl2ChConfMaxBerUs
ZTE-AN-XDSL2-MIBII ·
.1.3.6.1.4.1.3902.1015.1001.1.3.11.1.7
Object
Maximum Bit Error Ratio on Upstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the following values (for 1E-3, 1E-5 or 1E-7): eminus3 (1), eminus5 (2), eminus7 (3)
Context
- MIB
- ZTE-AN-XDSL2-MIBII
- OID
.1.3.6.1.4.1.3902.1015.1001.1.3.11.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zxAnXdsl2UsDataRateConfPrfEntry
- Table
- zxAnXdsl2UsDataRateConfPrfTable
- Siblings
- 10
Syntax
VDSL2-LINE-TC-MIBXdsl2MaxBer
- Source
- VDSL2-LINE-TC-MIBXdsl2MaxBer
- Base type
Enumeration
Values & Constraints
Type Values
1 | eminus3 |
2 | eminus5 |
3 | eminus7 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnXdsl2UsDataRateConfPrfName This object identifies a row in this table. | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.3.11.1.1 |
| zxAnXdsl2ChConfMinSosBitRateUs This parameter specifies the minimum net data rate required for a
valid SOS request in the upstream direction.
The value shall be coded as an unsigned integer representing the
d… | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.11.1.10 |
| zxAnXdsl2ChConfChannRaRatioUs Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #1 when performing rate
adaptation on Upstream. The ratio refers to the availabl… | column | percents Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.11.1.2 |
| zxAnXdsl2ChConfMinDataRateUs Minimum Data Rate on Upstream direction. The minimum net
data rate for the bearer channel, coded in bit/s. | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.11.1.3 |
| zxAnXdsl2ChConfMaxDataRateUs Maximum Data Rate on Upstream direction. The maximum net
data rate for the bearer channel, coded in bit/s. | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.11.1.4 |
| zxAnXdsl2ChConfMinResRateUs Minimum Reserved Data Rate on Upstream direction. The minimum
reserved net data rate for the bearer channel, coded in
bit/s. This parameter is used only if the Rate Adaptation
M… | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.11.1.5 |
| zxAnXdsl2ChConfMinRateLowPwrUs Minimum Data Rate in Low Power state on upstream direction.
The minimum net data rate for the bearer channel, coded in
bit/s., during the low power state (L1 in G.992.2, L2 in
G.9… | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.11.1.6 |
| zxAnXdsl2ChConfDsDataRateUs Data Rate Threshold Downshift for upstream direction. A
'Down-shift rate change' event is triggered when the
actual
upstream data rate is below the data rate at the last entry
in… | column | bits/second Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.11.1.8 |
| zxAnXdsl2UsDataRatePrfRowStatus This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'activ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.1001.1.3.11.1.80 |
| zxAnXdsl2ChConfUsDataRateUs Data Rate Threshold Up shift for upstream direction. An
'Up-shift rate change' event is triggered when the
actual
upstream data rate exceeds, by more than the threshold, the
data… | column | bits/second Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.11.1.9 |