zxAnXdsl2SeltCece

ZTE-AN-XDSL2-MIBII · .1.3.6.1.4.1.3902.1015.1001.1.7.1.1.4
MIB view Table view

Object

column r/w SNMPv2-TCTruthValue 
Capacity Estimate Calculation Enabling.
This parameter specifies if the SELT-P function shall perform the 
Downstream capacity and Upstream capacity estimation, if supported.

Context

MIB
ZTE-AN-XDSL2-MIBII
OID
.1.3.6.1.4.1.3902.1015.1001.1.7.1.1.4
Type
column
Access
readwrite
Status
current
Parent
zxAnXdsl2SeltConfEntry
Table
zxAnXdsl2SeltConfTable
Siblings
14

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
zxAnXdsl2LnSeltCmndConfLdsf
Command:Loop diagnostics mode forced (LDSF). Defines whether the line should be forced into the loop diagnostics mode by the near-end xTU on this line or only be responsive to lo…
columnVDSL2-LINE-TC-MIBXdsl2LineLdsf.1.3.6.1.4.1.3902.1015.1001.1.7.1.1.1
zxAnXdsl2SeltCapTargetSnrmUs
Capacity Estimate Target Noise Margin Upstream. This is the Noise Margin to be used in capacity estimate evaluation, relative to a BER requirement of 1E-7.
column0.1dB Unsigned32.1.3.6.1.4.1.3902.1015.1001.1.7.1.1.10
zxAnXdsl2SeltUerMeasureEnableC
This parameter is a binary variable, where '1' triggers the CO SELT PMD to start a UER measurement.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1015.1001.1.7.1.1.11
zxAnXdsl2SeltQlnMeasureEnableC
This parameter is a binary variable, where '1' triggers the CO SELT PMD to start a QLN measurement.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1015.1001.1.7.1.1.12
zxAnXdsl2SeltCalibrateCmd
Execute this command to calibrate the parameter that is used to calculate the SELT result. When execute this command before SELT, the test result will be more accurate.
columnVDSL2-LINE-TC-MIBXdsl2LineLdsf.1.3.6.1.4.1.3902.1015.1001.1.7.1.1.13
zxAnXdsl2SeltRawDataCmd
Defines whether the line should be forced into SELT raw data test mode.
columnVDSL2-LINE-TC-MIBXdsl2LineLdsf.1.3.6.1.4.1.3902.1015.1001.1.7.1.1.14
zxAnXdsl2SeltQuickTestEnable
Enable/disable the quick SELT test. enabled(1) - Start the SELT test with quick mode. disabled(2) - Start the SELT test with normal mode.
columnEnumeration.1.3.6.1.4.1.3902.1015.1001.1.7.1.1.15
zxAnXdsl2SeltUerMmd
SELT UER Maximum Measurement Duration. This parameter is the maximum allowed time for SELT Uncalibrated Echo Response measurement, between the time of the start command written …
columnseconds Unsigned32.1.3.6.1.4.1.3902.1015.1001.1.7.1.1.2
zxAnXdsl2SeltQlnMmd
SELT Quiet Line Noise Maximum Measurement Duration. This parameter is the maximum allowed time for SELT quiet line noise measurement, between the time of the start command writt…
columnseconds Unsigned32.1.3.6.1.4.1.3902.1015.1001.1.7.1.1.3
zxAnXdsl2SeltCapSignalPsdDs
Capacity Estimate Signal PSD Downstream. This configuration parameter defines the PSD template of the transmit signal to be used in capacity estimate evaluation. …
columnOctetString.1.3.6.1.4.1.3902.1015.1001.1.7.1.1.5
zxAnXdsl2SeltCapSignalPsdUs
Capacity Estimate Signal PSD Upstream. This configuration parameter defines the PSD template of the transmit signal to be used in capacity estimate evaluation. T…
columnOctetString.1.3.6.1.4.1.3902.1015.1001.1.7.1.1.6
zxAnXdsl2SeltCapNoisePsdDs
Capacity Estimate Noise PSD Downstream. This configuration parameter defines the PSD template of the transmit signal to be used in capacity estimate evaluation. …
columnOctetString.1.3.6.1.4.1.3902.1015.1001.1.7.1.1.7
zxAnXdsl2SeltCapNoisePsdUs
Capacity Estimate Noise PSD Upstream. This configuration parameter defines the PSD template of the transmit signal to be used in capacity estimate evaluation. Th…
columnOctetString.1.3.6.1.4.1.3902.1015.1001.1.7.1.1.8
zxAnXdsl2SeltCapTargetSnrmDs
Capacity Estimate Target Noise Margin Downstream. This is the Noise Margin to be used in capacity estimate evaluation, relative to a BER requirement of 1E-7.
column0.1dB Unsigned32.1.3.6.1.4.1.3902.1015.1001.1.7.1.1.9