zxAnXdsl2LnCmndConfBpsc
ZTE-AN-XDSL2-MIBII ·
.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.23
Object
Command:Request a bits per sub-carrier measurement to be made.
A request for a bits per sub-carrier measurement is made
by setting this attribute to the value of measure(2).
Upon completion of the measurement request,
the Access Node shall set this attribute to idle(1).
Note that a bits per sub-carrier measurement is also
performed during a line diagnostic procedure. This
attribute provides an additional mechanism to fetch
the bits per sub-carrier data. This additional
mechanism is provided so that bits per sub-carrier
data may be fetched without forcing the line into no
power state. This is useful because the bits per
sub-carrier allocation may be adjusted at show time
due to rate adaption and bit swapping.
The implementation of this additional mechanism for
measuring bits per sub-carrier is not mandatory.
The results of the bits per sub-carrier measurement are
stored in xdsl2LineSegmentTable. The status of the bits
per sub-carrier measurement is indicated by
xdsl2LineCmndConfBpscFailReason.
Context
- MIB
- ZTE-AN-XDSL2-MIBII
- OID
.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.23- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zxAnXdsl2LnEntry
- Table
- zxAnXdsl2LnTable
- Siblings
- 98
Syntax
VDSL2-LINE-TC-MIBXdsl2LineBpsc
- Source
- VDSL2-LINE-TC-MIBXdsl2LineBpsc
- Base type
Enumeration
Values & Constraints
Type Values
1 | idle |
2 | measure |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnXdsl2LnCh1DsDataRateConfPrf The value of this object identifies the row in the xDSL2
Line DsDataRate Profile Table, (zxAnXdsl2DsDataRateConfPrfTable),
which applies for this line.
This objec… | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.1 |
| zxAnXdsl2LnDpboConfPrf The value of this object identifies the row in the xDSL2
Line Dpbo Profile Table, (zxAnXdsl2DpboConfPrfTable),
which applies for this line.
This object MUST be ma… | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.10 |
| zxAnXdsl2LnLofStatsUs Upstream count of times that there was LOF. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.100 |
| zxAnXdsl2LnLolStatsDs Downstream count of times that there was LOL. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.101 |
| zxAnXdsl2LnLolStatsUs Upstream count of times that there was LOF. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.102 |
| zxAnXdsl2LnLprStatsDs Downstream count of times that there was LPR. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.103 |
| zxAnXdsl2LnLprStatsUs Upstream count of times that there was LPR. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.104 |
| zxAnXdsl2LnActInpShineDs The test parameter INP_act_SHINE is defined as the actual INP
against SHINE of the latency path with retransmission under
following specific conditions:
Assuming impulse noise pr… | column | DMT Symbol SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.105 |
| zxAnXdsl2LnActInpShineUs The test parameter INP_act_SHINE is defined as the actual INP
against SHINE of the latency path with retransmission under
following specific conditions:
Assuming impulse noise pr… | column | DMT Symbol SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.106 |
| zxAnXdsl2LnActInpReinDs The test parameter INP_act_REIN is defined as the minimum of
1) the actual INP against REIN of the latency path with
retransmission under the following specific conditions:
Assum… | column | DMT Symbol SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.107 |
| zxAnXdsl2LnActInpReinUs The test parameter INP_act_REIN is defined as the minimum of
1) the actual INP against REIN of the latency path with
retransmission under the following specific conditions:
Assum… | column | DMT Symbol SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.108 |
| zxAnXdsl2LnStatusActRaModeDs This parameter indicates the actual active RA-MODE in the
downstream direction.
If ACT-RA-MODEds equals 1, the link is operating in RA-MODE 1
(MANUAL).
If ACT-RA-MODEds equals … | column | Enumeration | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.109 |
| zxAnXdsl2LnUpboConfPrf The value of this object identifies the row in the xDSL2
Line Upbo Profile Table, (zxAnXdsl2UpboConfPrfTable),
which applies for this line.
This object MUST be ma… | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.11 |
| zxAnXdsl2LnStatusActRaModeUs This parameter indicates the actual active RA-MODE in the upstream
direction.
If ACT-RA-MODEus equals 1, the link is operating in RA-MODE 1
(MANUAL).
If ACT-RA-MODEus equals 2, … | column | Enumeration | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.110 |
| zxAnXdsl2LnStatusRtxUsedDs This parameter specifies whether ITU-T G.998.4 retransmission
is used (i.e., active in showtime) in a given transmit direction.
The parameter in downstream is RTX_USED_ds, and t… | column | Enumeration | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.111 |
| zxAnXdsl2LnStatusRtxUsedUs This parameter specifies whether ITU-T G.998.4 retransmission
is used (i.e., active in showtime) in a given transmit direction.
The parameter in downstream is RTX_USED_ds, and t… | column | Enumeration | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.112 |
| zxAnXdsl2LnSnrMarginConfPrf The value of this object identifies the row in the xDSL2
Noise Margin Profile Table, (zxAnXdsl2SnrMarginConfPrfTable),
which applies for this line.
This object MU… | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.12 |
| zxAnXdsl2LnCh1DelayInpConfPrf The value of this object identifies the row in the xDSL2
Delay AND INP Profile Table, (zxAnXdsl2DelayInpConfPrfTable),
which applies for this line.
This object MU… | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.13 |
| zxAnXdsl2LnCh2DelayInpConfPrf The value of this object identifies the row in the xDSL2
Delay AND INP Profile Table, (zxAnXdsl2DelayInpConfPrfTable),
which applies for this line.
This object MU… | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.14 |
| zxAnXdsl2LnCh3DelayInpConfPrf The value of this object identifies the row in the xDSL2
Delay AND INP Profile Table, (zxAnXdsl2DelayInpConfPrfTable),
which applies for this line.
This object MU… | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.15 |
| zxAnXdsl2LnCh4DelayInpConfPrf The value of this object identifies the row in the xDSL2
Delay AND INP Profile Table, (zxAnXdsl2DelayInpConfPrfTable),
which applies for this line.
This object MU… | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.16 |
| zxAnXdsl2LnRfiConfPrf The value of this object identifies the row in the xDSL2
RFI Profile Table, (zxAnXdsl2RfiConfPrfTable),
which applies for this line.
This object MUST be maintaine… | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.17 |
| zxAnXdsl2LnVirtualNoiseConfPrf The value of this object identifies the row in the xDSL2
Virtual Noise Profile Table, (zxAnXdsl2VirtualNoiseConfPrfTable),
which applies for this line.
This objec… | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.18 |
| zxAnXdsl2LnAlmThreshPrfName The value of this object identifies the row in the xDSL2
Line Alarm Configuration Profile Table,
(zxAnXdsl2LnAlarmConfPrfTable), which applies to this line.
This ob… | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.19 |
| zxAnXdsl2LnCh2DsDataRateConfPrf The value of this object identifies the row in the xDSL2
Line DsDataRate Profile Table, (zxAnXdsl2DsDataRateConfPrfTable),
which applies for this line.
This objec… | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.2 |
| zxAnXdsl2LnCmndConfPmsf Command:Power management state forced (PMSF). Defines the line
states to be forced by the near-end xTU on this line.
The various possible values are:
l3toL0 (0),
l0toL2 (2)… | column | VDSL2-LINE-TC-MIBXdsl2ConfPmsForce | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.20 |
| zxAnXdsl2LnCmndConfLdsf Command:Loop diagnostics mode forced (LDSF). Defines whether the
line should be forced into the loop diagnostics mode by the
near-end xTU on this line or only be responsive to l… | column | VDSL2-LINE-TC-MIBXdsl2LineLdsf | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.21 |
| zxAnXdsl2LnCmndConfLdsfFailReason Command:The status of the recent occasion the Loop diagnostics mode
forced (LDSF) was issued for the associated line. Possible
values are:
none (1) - The default value … | column | VDSL2-LINE-TC-MIBXdsl2LdsfResult | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.22 |
| zxAnXdsl2LnCmndConfBpscFailReason Command:The status of the most recent bits per sub-carrier
measurement request issued for the associated line.
Possible values are:
none (1) - The default… | column | VDSL2-LINE-TC-MIBXdsl2BpscResult | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.24 |
| zxAnXdsl2LnCmndConfBpscReqCount Command:Measurement request counter.
This counter is incremented by one every time a request
for a measurement is made. A measurement request is made
by setting the xdsl2LineCmndC… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.25 |
| zxAnXdsl2LnCmndAutomodeColdStart Command: Automode cold start forced. This parameter is defined
in order to improve testing of the performance of xTUs
supporting automode when it is enabled in the MIB.
Change th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.26 |
| zxAnXdsl2LnCmndConfReset Command: Request a line reset to occur.
If this attribute is set to the value of reset(2), then
force the line to reset ( i.e. the modems will retrain ).
When the line has success… | column | VDSL2-LINE-TC-MIBXdsl2LineReset | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.27 |
| zxAnXdsl2LnStatusXtuTransSys The xTU Transmission System (xTS) in use.
It is coded in a bit-map representation with one bit set to
'1' (the selected coding for the DSL line). This
parameter
may be derived fr… | column | ZTE-AN-XDSL2-MIBZxAnXdsl2TransmissionModeType | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.28 |
| zxAnXdsl2LnStatusPwrMngState The current power management state. One of four possible
power management states:
L0 - Synchronized and full transmission (i.e., Showtime),
L1 - Low Power with reduced net … | column | VDSL2-LINE-TC-MIBXdsl2PowerMngState | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.29 |
| zxAnXdsl2LnCh3DsDataRateConfPrf The value of this object identifies the row in the xDSL2
Line DsDataRate Profile Table, (zxAnXdsl2DsDataRateConfPrfTable),
which applies for this line.
This objec… | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.3 |
| zxAnXdsl2LnStatusInitResult Indicates the result of the last full initialization
performed on the line. It is an enumeration type with the following
values: noFail(0), configError(1), configNotFeasible(2), … | column | Enumeration | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.30 |
| zxAnXdsl2LnStatusLastStateDs The last successful transmitted initialization state in
the downstream direction in the last full initialization
performed on the line. | column | VDSL2-LINE-TC-MIBXdsl2LastTransmittedState | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.31 |
| zxAnXdsl2LnStatusLastStateUs The last successful transmitted initialization state in the
upstream direction in the last full initialization performed
on the line. | column | VDSL2-LINE-TC-MIBXdsl2LastTransmittedState | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.32 |
| zxAnXdsl2LnStatusXtur Indicates current state (existing failures) of the xTU-R.
This is a bit-map of possible conditions.
This BITS structure can report the following failures:
… | column | Bits | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.33 |
| zxAnXdsl2LnStatusXtuc Indicates current state (existing failures) of the xTU-C.
This is a bit-map of possible conditions.
This BITS structure can report the following failures:
… | column | Bits | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.34 |
| zxAnXdsl2LnStatusAttainRateDs Maximum Attainable Data Rate Downstream.
The maximum downstream net data rate currently attainable by
the xTU-C transmitter and the xTU-R receiver, coded in
bit/s. | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.35 |
| zxAnXdsl2LnStatusAttainRateUs Maximum Attainable Data Rate Upstream.
The maximum upstream net data rate currently attainable by the
xTU-R transmitter and the xTU-C receiver, coded in bit/s. | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.36 |
| zxAnXdsl2LnStatusActPsdDs Actual Power Spectrum Density (PSD) Downstream. The average
downstream transmit PSD over the sub-carriers used for
downstream. It ranges from -900 to 0 units of 0.1 dB
(Physical… | column | 0.1 dBm/Hz Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.37 |
| zxAnXdsl2LnStatusActPsdUs Actual Power Spectrum Density (PSD) Upstream. The average
upstream transmit PSD over the sub-carriers used for upstream.
It ranges from -900 to 0 units of 0.1 dB (Physical values… | column | 0.1 dBm/Hz Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.38 |
| zxAnXdsl2LnStatusActAtpDs Actual Aggregate Transmit Power Downstream. The total
amount
of transmit power delivered by the xTU-C at the U-C reference
point, at the instant of measurement. It ranges from… | column | 0.1 dBm Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.39 |
| zxAnXdsl2LnCh4DsDataRateConfPrf The value of this object identifies the row in the xDSL2
Line DsDataRate Profile Table, (zxAnXdsl2DsDataRateConfPrfTable),
which applies for this line.
This objec… | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.4 |
| zxAnXdsl2LnStatusActAtpUs Actual Aggregate Transmit Power Upstream. The total amount
of
transmit power delivered by the xTU-R at the U-R
reference point, at the instant of measurement. It ranges
from … | column | 0.1 dBm Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.40 |
| zxAnXdsl2LnStatusActProfile Actual Standard Profile used by this connection. | column | VDSL2-LINE-TC-MIBXdsl2LineProfiles | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.41 |
| zxAnXdsl2LnStatusActLimitMask The Limit PSD mask and band plan in use.
The configuration parameter xdsl2LConfPrfLimitMask defines
the set of allowed G.993.2 limit PSD masks.
This parameter indicates the limit … | column | VDSL2-LINE-TC-MIBXdsl2LineLimitMask | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.42 |
| zxAnXdsl2LnStatusActUs0Mask The US0 PSD mask in use.
The configuration parameter xdsl2LConfPrfUs0Mask defines
the set of allowed US0 PSD masks.
This parameter indicates the US0 PSD mask in use on
this line.
… | column | VDSL2-LINE-TC-MIBXdsl2LineUs0Mask | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.43 |
| zxAnXdsl2LnStatusActSnrModeDs This parameter indicates if the transmitter
referred virtual noise is active on the line in the
downstream direction. | column | VDSL2-LINE-TC-MIBXdsl2LineSnrMode | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.44 |
| zxAnXdsl2LnStatusActSnrModeUs This parameter indicates if the transmitter
referred virtual noise is active on the line in the
upstream direction. | column | VDSL2-LINE-TC-MIBXdsl2LineSnrMode | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.45 |
| zxAnXdsl2LnStatusActElPolicy The actual UPBO kl0 policy. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.46 |
| zxAnXdsl2LnStatusElectLenDs (UPBOKLE)
This parameter contains the estimated electrical length of downstream
expressed in dB at 1 MHz, kl0. This is the final electrical
length that would have been sent from t… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.47 |
| zxAnXdsl2LnStatusElectLenUs (UPBOKLE)
This parameter contains the estimated electrical length of upstream
expressed in dB at 1 MHz, kl0. This is the final electrical
length that would have been sent from the… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.48 |
| zxAnXdsl2LnStatusActKl0 The actual kl0 used by the line. | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.49 |
| zxAnXdsl2LnCh1UsDataRateConfPrf The value of this object identifies the row in the xDSL2
Line UsDataRate Profile Table, (zxAnXdsl2UsDataRateConfPrfTable),
which applies for this line.
This objec… | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.5 |
| zxAnXdsl2LnStatusTssiDs The transmit spectrum shaping (TSSi) breakpoints of downstream expressed
as the set of breakpoints exchanged during G.994.1.
Each breakpoint is a pair of values occupying 3 octets… | column | VDSL2-LINE-TC-MIBXdsl2Tssi | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.50 |
| zxAnXdsl2LnStatusTssiUs The transmit spectrum shaping (TSSi) breakpoints of upstream expressed
as the set of breakpoints exchanged during G.994.1.
Each breakpoint is a pair of values occupying 3 octets w… | column | VDSL2-LINE-TC-MIBXdsl2Tssi | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.51 |
| zxAnXdsl2LnStatusMrefPsdDs The MEDLEY Reference PSD status parameters on
downstreasm direction expressed as the set of breakpoints
exchanged at initialization.
The OCTET STRING contains up to 48 pairs
of va… | column | VDSL2-LINE-TC-MIBXdsl2MrefPsdDs | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.52 |
| zxAnXdsl2LnStatusMrefPsdUs The MEDLEY Reference PSD status parameters on
upstreasm direction expressed as the set of breakpoints
exchanged at initialization.
The OCTET STRING contains up to 32 pairs
of valu… | column | VDSL2-LINE-TC-MIBXdsl2MrefPsdUs | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.53 |
| zxAnXdsl2LnStatusTrellisDs This parameter reports whether trellis coding
is in use in the downstream direction. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.54 |
| zxAnXdsl2LnStatusTrellisUs This parameter reports whether trellis coding
is in use in the upstream direction. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.55 |
| zxAnXdsl2LnStatusActualCe (ACTUALCE)
This parameter reports the cyclic extension
used on the line. It is coded as an unsigned integer from
2 to 16 in units of N/32 samples, where 2N is the IDFT size. | column | N/32 samples Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.56 |
| zxAnXdsl2LnStatusClassMask (CLASSMASK).
In order to reduce the number of configuration
possibilities, the limit Power Spectral Density masks
(see LIMITMASK) are grouped in PSD mask classes.
Each class is de… | column | VDSL2-LINE-TC-MIBXdsl2LineClassMask | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.57 |
| zxAnXdsl2LnStatusOperState The operational status of the line. | column | Enumeration | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.58 |
| zxAnXdsl2LnStatusActDataPathType Actual data path type of this line. | column | Enumeration | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.59 |
| zxAnXdsl2LnCh2UsDataRateConfPrf The value of this object identifies the row in the xDSL2
Line UsDataRate Profile Table, (zxAnXdsl2UsDataRateConfPrfTable),
which applies for this line.
This objec… | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.6 |
| zxAnXdsl2LnStatusDataPathType Data path type of this line. | column | Enumeration | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.60 |
| zxAnXdsl2LnStatusBitswapDs Enabled or disabled the Bitswap of downstream. | column | Enumeration | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.61 |
| zxAnXdsl2LnStatusBitswapUs Enabled or disabled the Bitswap of upstream. | column | Enumeration | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.62 |
| zxAnXdsl2LnStatusHighRateLimit Enabled or disabled the high rate limitation. | column | Enumeration | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.63 |
| zxAnXdsl2LnExtConfPrf The value of this object identifies the row in the xDSL2
Line Dpbo Profile Table, (zxAnXdsl2LnExtConfPrfTable),
which applies for this line.
This object MUST be m… | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.64 |
| zxAnXdsl2LnStatusPrevAttainRateDs Last Maximum Attainable Data Rate Downstream.
The maximum downstream net data rate attainable by
the xTU-C transmitter and the xTU-R receiver last time,
coded in kbit/s. | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.65 |
| zxAnXdsl2LnStatusPrevAttainRateUs Last Maximum Attainable Data Rate Upstream.
The maximum upstream net data rate attainable by the
xTU-R transmitter and the xTU-C receiver last time,
coded in kbit/s. | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.66 |
| zxAnXdsl2LnCmndPMReset Reset the performance monitoring results of single line.
currentPerf(0) - reset the current performance monitoring results.
it will affect o… | column | Bits | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.67 |
| zxAnXdsl2LnCh3UsDataRateConfPrf The value of this object identifies the row in the xDSL2
Line UsDataRate Profile Table, (zxAnXdsl2UsDataRateConfPrfTable),
which applies for this line.
This objec… | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.7 |
| zxAnXdsl2LnCh4UsDataRateConfPrf The value of this object identifies the row in the xDSL2
Line UsDataRate Profile Table, (zxAnXdsl2UsDataRateConfPrfTable),
which applies for this line.
This objec… | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.8 |
| zxAnXdsl2LnInpEtrDs The expected throughput (ETR). | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.81 |
| zxAnXdsl2LnInpEtrUs The expected throughput (ETR). | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.82 |
| zxAnXdsl2LnInpEftrDs The error-free throughput (EFTR is defined as the average
bit-rate at the alpha1/beta1 reference point, of bits originating
from DTU's which have been detected to contain no erro… | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.83 |
| zxAnXdsl2LnInpEftrUs The error-free throughput (EFTR is defined as the average
bit-rate at the alpha1/beta1 reference point, of bits
originating from DTU's which have been detected to contain
no err… | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.84 |
| zxAnXdsl2LnInpMinEftrDs deprecated The minimum error-free throughput (EFTR_min is defined as the
minimum of the EFTR observed since the last reading of the
EFTR_min. | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.85 |
| zxAnXdsl2LnInpMinEftrUs deprecated The minimum error-free throughput (EFTR_min is defined as the
minimum of the EFTR observed since the last reading of the
EFTR_min. | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.86 |
| zxAnXdsl2LnInpActDelayDs If retransmission is used in a given transmit direction, this
Object is defined as the actual value of the time-independent
component of the delay between the alfa1 and beta1 re… | column | ms Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.87 |
| zxAnXdsl2LnInpActDelayUs If retransmission is used in a given transmit direction, this
Object is defined as the actual value of the time-independent
component of the delay between the alfa1 and beta1 re… | column | ms Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.88 |
| zxAnXdsl2LnFextCancellationDs Enable/disable downstream FEXT cancellation.
This configuration parameter shall be defined for each line in a
group of vectored lines. It enables or disables FEXT cancellation
f… | column | Enumeration | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.89 |
| zxAnXdsl2LnSpectrumConfPrf The value of this object identifies the row in the xDSL2
Line Spectrum Profile Table, (zxAnXdsl2SpectrumConfPrfTable),
which applies for this line.
This object MU… | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.9 |
| zxAnXdsl2LnFextCancellationUs Enable/disable upstream FEXT cancellation.
This configuration parameter shall be defined for each line in a
group of vectored lines. It enables or disables FEXT cancellation
fro… | column | Enumeration | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.90 |
| zxAnXdsl2LnSosConfPrf The value of this object identifies the row in the xDSL2
Line SOS Profile Table, (zxAnXdsl2SosConfPrfTable),
which applies for this line.
This object MUST be mainta… | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.91 |
| zxAnXdsl2LnStatusLnAttenDs Downstream line Attenuation.
When referring to a band in the downstream direction, it is the
measured difference in the total power transmitted by the xTU-C
and the total power re… | column | 0.1 dB Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.92 |
| zxAnXdsl2LnStatusLnAttenUs Upstream line Attenuation.
When referring to a band in the downstream direction, it is the
measured difference in the total power transmitted by the xTU-C
and the total power rece… | column | 0.1 dB Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.93 |
| zxAnXdsl2LnStatusSigAttenDs Downstream signal Attenuation.
When referring to a band in the downstream direction, it is the
measured difference in the total power transmitted by the xTU-C
and the total power … | column | 0.1 dB Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.94 |
| zxAnXdsl2LnStatusSigAttenUs Upstream signal Attenuation.
When referring to a band in the downstream direction, it is the
measured difference in the total power transmitted by the xTU-C
and the total power re… | column | 0.1 dB Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.95 |
| zxAnXdsl2LnStatusSnrMarginDs SNR Margin is the maximum increase in dB of the noise power
received at the XTU (xTU-R for a band in the downstream direction
and xTU-C for a band in the upstream direction), such… | column | 0.1 dB Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.96 |
| zxAnXdsl2LnStatusSnrMarginUs SNR Margin is the maximum increase in dB of the noise power
received at the XTU (xTU-R for a band in the downstream direction
and xTU-C for a band in the upstream direction), such… | column | 0.1 dB Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.97 |
| zxAnXdsl2LnInmConfPrf The value of this object identifies the row in the xDSL2
Line INM Profile Table, (zxAnXdsl2InmConfPrfTable),
which applies for this line.
This object MUST be mainta… | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.98 |
| zxAnXdsl2LnLofStatsDs Downstream count of times that there was LOF. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.99 |