zxAnXdsl2LConfUpboU2bandPsdA
ZTE-AN-XDSL2-MIBII ·
.1.3.6.1.4.1.3902.1015.1001.1.3.14.1.6
Object
column
r/w
0.01 dBm/Hz Unsigned32
(UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band. A UPBOPSD defined for each band shall consist of two parameters [a, b]. Parameter 'a' (zxAnXdsl2LConfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and parameter 'b' (zxAnXdsl2LConfUpboPsdB) ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'. Setting zxAnXdsl2LConfUpboPsdA to 4000 and zxAnXdsl2LConfUpboPsdB to 0 is a special configuration to disable UPBO in the respective upstream band.
Context
- MIB
- ZTE-AN-XDSL2-MIBII
- OID
.1.3.6.1.4.1.3902.1015.1001.1.3.14.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Units
- 0.01 dBm/Hz
- Parent
- zxAnXdsl2UpboConfPrfEntry
- Table
- zxAnXdsl2UpboConfPrfTable
- Siblings
- 15
Syntax
0.01 dBm/Hz Unsigned32
Values & Constraints
Object Constraints
range: 4000-8095
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnXdsl2LUpboConfPrfName This object identifies a row in this table. | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.3.14.1.1 |
| zxAnXdsl2LConfUpboU4bandPsdA (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.14.1.10 |
| zxAnXdsl2LConfUpboU4bandPsdB (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.14.1.11 |
| zxAnXdsl2LConfUpboU1bandKLRef This parameter defines the UPBO reference electrical length used to
compute the upstream power back-off for each upstream band except US0,
for the optional Equalized FEXT UPBO m… | column | 0.1 dB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.14.1.12 |
| zxAnXdsl2LConfUpboU2bandKLRef This parameter defines the UPBO reference electrical length used to
compute the upstream power back-off for each upstream band except US0,
for the optional Equalized FEXT UPBO m… | column | 0.1 dB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.14.1.13 |
| zxAnXdsl2LConfUpboU3bandKLRef This parameter defines the UPBO reference electrical length used to
compute the upstream power back-off for each upstream band except US0,
for the optional Equalized FEXT UPBO m… | column | 0.1 dB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.14.1.14 |
| zxAnXdsl2LConfUpboU4bandKLRef This parameter defines the UPBO reference electrical length used to
compute the upstream power back-off for each upstream band except US0,
for the optional Equalized FEXT UPBO m… | column | 0.1 dB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.14.1.15 |
| zxAnXdsl2LConfUpboKL (UPBOKL).
This configuration parameter defines the electrical length
expressed in dB at 1MHz, kl0, configured by the CO-MIB.
The value ranges from 0 (coded as 0) to 128 dB (coded … | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.14.1.2 |
| zxAnXdsl2LConfUpboKLF Defines the upstream power backoff force mode (UPBOKLF). | column | VDSL2-LINE-TC-MIBXdsl2UpboKLF | .1.3.6.1.4.1.3902.1015.1001.1.3.14.1.3 |
| zxAnXdsl2LUpboConfPrfRowStatus This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'activ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.1001.1.3.14.1.30 |
| zxAnXdsl2LConfUpboU1bandPsdA (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.14.1.4 |
| zxAnXdsl2LConfUpboU1bandPsdB (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.14.1.5 |
| zxAnXdsl2LConfUpboU2bandPsdB (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.14.1.7 |
| zxAnXdsl2LConfUpboU3bandPsdA (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.14.1.8 |
| zxAnXdsl2LConfUpboU3bandPsdB (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.14.1.9 |