zxAnXdsl2ChConfMaxDataRateDs
ZTE-AN-XDSL2-MIBII ·
.1.3.6.1.4.1.3902.1015.1001.1.3.10.1.4
Object
column
r/w
kbps Unsigned32
Maximum Data Rate on Downstream direction. The maximum net data rate for the bearer channel, coded in bit/s.
Context
- MIB
- ZTE-AN-XDSL2-MIBII
- OID
.1.3.6.1.4.1.3902.1015.1001.1.3.10.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Units
- kbps
- Parent
- zxAnXdsl2DsDataRateConfPrfEntry
- Table
- zxAnXdsl2DsDataRateConfPrfTable
- Siblings
- 10
Syntax
kbps Unsigned32
Values & Constraints
Object Constraints
range: 0-200000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnXdsl2DsDataRateConfPrfName This object identifies a row in this table. | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.3.10.1.1 |
| zxAnXdsl2ChConfMinSosBitRateDs This parameter specifies the minimum net data rate required for a
valid SOS request in the downstream direction.
The value shall be coded as an unsigned integer representing the … | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.10.1.10 |
| zxAnXdsl2ChConfChannRaRatioDs Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #1 when performing rate
adaptation on Downstream. The ratio refers to the availa… | column | percents Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.10.1.2 |
| zxAnXdsl2ChConfMinDataRateDs Minimum Data Rate on Downstream direction. The minimum net
data rate for the bearer channel, coded in bit/s. | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.10.1.3 |
| zxAnXdsl2ChConfMinResRateDs Minimum Reserved Data Rate on Downstream direction. The
minimum reserved net data rate for the bearer channel, coded
in bit/s. This parameter is used only if the Rate Adaptation… | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.10.1.5 |
| zxAnXdsl2ChConfMinRateLowPwrDs Minimum Data Rate in Low Power state on Downstream direction.
The minimum net data rate for the bearer channel, coded in
bit/s., during the low power state (L1 in G.992.2, L2 in
G… | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.10.1.6 |
| zxAnXdsl2ChConfMaxBerDs Maximum Bit Error Ratio on Downstream direction. The
maximum
bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7):
… | column | VDSL2-LINE-TC-MIBXdsl2MaxBer | .1.3.6.1.4.1.3902.1015.1001.1.3.10.1.7 |
| zxAnXdsl2ChConfDsDataRateDs Data Rate Threshold Downshift for downstream direction. A
'Down-shift rate change' event is triggered when the
actual
downstream data rate is below the data rate at the last entr… | column | bits/second Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.10.1.8 |
| zxAnXdsl2DsDataRatePrfRowStatus This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'activ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.1001.1.3.10.1.80 |
| zxAnXdsl2ChConfUsDataRateDs Data Rate Threshold Up shift for downstream direction. An
'Up-shift rate change' event is triggered when the
actual
downstream data rate exceeds, by more than the threshold, the
… | column | bits/second Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.10.1.9 |