zxAnXdsl2ChConfDsDataRateDs
ZTE-AN-XDSL2-MIBII ·
.1.3.6.1.4.1.3902.1015.1001.1.3.10.1.8
Object
column
r/w
bits/second Unsigned32
Data Rate Threshold Downshift for downstream direction. A 'Down-shift rate change' event is triggered when the actual downstream data rate is below the data rate at the last entry into Showtime, by more than the threshold. The parameter is coded in bit/s.
Context
- MIB
- ZTE-AN-XDSL2-MIBII
- OID
.1.3.6.1.4.1.3902.1015.1001.1.3.10.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Units
- bits/second
- Parent
- zxAnXdsl2DsDataRateConfPrfEntry
- Table
- zxAnXdsl2DsDataRateConfPrfTable
- Siblings
- 10
Syntax
bits/second Unsigned32
Values & Constraints
Object Constraints
range: 0-200000000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnXdsl2DsDataRateConfPrfName This object identifies a row in this table. | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.3.10.1.1 |
| zxAnXdsl2ChConfMinSosBitRateDs This parameter specifies the minimum net data rate required for a
valid SOS request in the downstream direction.
The value shall be coded as an unsigned integer representing the … | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.10.1.10 |
| zxAnXdsl2ChConfChannRaRatioDs Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #1 when performing rate
adaptation on Downstream. The ratio refers to the availa… | column | percents Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.10.1.2 |
| zxAnXdsl2ChConfMinDataRateDs Minimum Data Rate on Downstream direction. The minimum net
data rate for the bearer channel, coded in bit/s. | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.10.1.3 |
| zxAnXdsl2ChConfMaxDataRateDs Maximum Data Rate on Downstream direction. The maximum net
data rate for the bearer channel, coded in bit/s. | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.10.1.4 |
| zxAnXdsl2ChConfMinResRateDs Minimum Reserved Data Rate on Downstream direction. The
minimum reserved net data rate for the bearer channel, coded
in bit/s. This parameter is used only if the Rate Adaptation… | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.10.1.5 |
| zxAnXdsl2ChConfMinRateLowPwrDs Minimum Data Rate in Low Power state on Downstream direction.
The minimum net data rate for the bearer channel, coded in
bit/s., during the low power state (L1 in G.992.2, L2 in
G… | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.10.1.6 |
| zxAnXdsl2ChConfMaxBerDs Maximum Bit Error Ratio on Downstream direction. The
maximum
bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7):
… | column | VDSL2-LINE-TC-MIBXdsl2MaxBer | .1.3.6.1.4.1.3902.1015.1001.1.3.10.1.7 |
| zxAnXdsl2DsDataRatePrfRowStatus This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'activ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.1001.1.3.10.1.80 |
| zxAnXdsl2ChConfUsDataRateDs Data Rate Threshold Up shift for downstream direction. An
'Up-shift rate change' event is triggered when the
actual
downstream data rate exceeds, by more than the threshold, the
… | column | bits/second Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.10.1.9 |