zxAnSlcDelayDialMode

ZTE-AN-VOICE-PORT-MIB · .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.31

Object

column r/w Enumeration

Delay dial mode.
noDelay(1): No delay,dial is send to PBX immediately;
delay(2):   Delay until receives signal from PBX.

Context

MIB: ZTE-AN-VOICE-PORT-MIB
OID: .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.31
Type: column
Access: readwrite
Status: current
Parent: a200SlcEntry
Table: a200SlcTable
Siblings: 36

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	noDelay
`2`	delay

Related Objects

Sibling Objects

Object	Type	Syntax	OID
a200slcrackno \u7535\u8def\u5e8f\u53f7	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.1`
a200slcQovsId	column	Integer32	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.10`
a200slcCIDType	column	Enumeration	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.11`
a200slcImType	column	Enumeration	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.12`
a200slcecenable	column	Enumeration	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.14`
a200slcuserclass	column	Enumeration	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.15`
a200slcPktToPcmGain	column	Integer32	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.16`
a200slcPcmToPktGain	column	Integer32	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.17`
a200slcphonenum	column	OctetString	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.18`
a200slcoperNum end of the circuit No., should be larger or equal to msagSlcBegin	column	Integer32	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.19`
a200slcshelfno \u7535\u8def\u5e8f\u53f7	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.2`
a200slcblockoper block slc	column	Integer32	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.20`
a200slcunblockoper unblock slc	column	Integer32	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.21`
a200slcmonitorflag	column	Integer32	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.22`
a200slcmonitoreerack	column	Integer32	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.23`
a200slcmonitoreeshelf	column	Integer32	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.24`
a200slcmonitoreeslot	column	Integer32	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.25`
a200slcmonitoreeindex	column	Integer32	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.26`
a200slcDialMode DDI number send mode	column	Enumeration	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.27`
a200slcFeedCurrent Feed current	column	mA Enumeration	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.28`
a200slcHighImpedanceOper Set subscriber circuit to high-impedance status.	column	Integer32	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.29`
a200slcslotno \u7535\u8def\u5e8f\u53f7	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.3`
a200slcNoneHighImpedanceOper Set subscriber circuit to none high-impedance status.	column	Integer32	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.30`
zxAnSlcDdiTrapEnable Enables or disables DDI port trap.	column	Enumeration	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.32`
zxAnSlcSemiPerConnSrcIpAddr The source IP address of semi permanent connection. The default value 0.0.0.0 means not configured.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.33`
zxAnSlcSemiPerConnSrcPort The source port semi permanent connection. The default value 0 means not configured.	column	Integer32	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.34`
zxAnSlcSemiPerConnDstIpAddr The destination IP address of semi permanent connection. The default value 0.0.0.0 means not configured.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.35`
zxAnSlcSemiPerConnDstPort The destination port of semi permanent connection. The default value 0 means not configured.	column	Integer32	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.36`
zxAnSlcSemiPerConnSdpProfileId SDP profile ID. The default value 0 means not configured.	column	Integer32	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.37`
zxAnSlcSemiPerConnSdpInformation SDP information.	column	OctetString	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.38`
a200slcindex \u7535\u8def\u5e8f\u53f7	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.4`
a200slcpkg \u7535\u8def\u652f\u6301\u7684\u5305\u7c7b\u578b\uff0c\u6309\u4f4d \u53d6\u503c	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.5`
a200slcstatus \u7535\u8def\u72b6\u6001\uff0c\u6309\u4f4d\u53d6\u503c	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.6`
a200slcdftevent \u7535\u8def\u7f3a\u7701\u68c0\u6d4b\u4e8b\u4ef6\u7c7b\u578b \uff0c\u6309\u4f4d\u53d6\u503c	column	Integer32	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.7`
a200slcusermode	column	Enumeration	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.8`
a200slcFaxMode	column	Enumeration	`.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.9`