a200slcphonenum
ZTE-AN-VOICE-PORT-MIB ·
.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.18
Object
column
r/w
OctetString
No description available.
Context
- MIB
- ZTE-AN-VOICE-PORT-MIB
- OID
.1.3.6.1.4.1.3902.1015.5200.3.3.1.1.18- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- a200SlcEntry
- Table
- a200SlcTable
- Siblings
- 36
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| a200slcrackno \u7535\u8def\u5e8f\u53f7 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.1 |
| a200slcQovsId | column | Integer32 | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.10 |
| a200slcCIDType | column | Enumeration | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.11 |
| a200slcImType | column | Enumeration | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.12 |
| a200slcecenable | column | Enumeration | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.14 |
| a200slcuserclass | column | Enumeration | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.15 |
| a200slcPktToPcmGain | column | Integer32 | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.16 |
| a200slcPcmToPktGain | column | Integer32 | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.17 |
| a200slcoperNum end of the circuit No., should be larger or equal to msagSlcBegin | column | Integer32 | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.19 |
| a200slcshelfno \u7535\u8def\u5e8f\u53f7 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.2 |
| a200slcblockoper block slc | column | Integer32 | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.20 |
| a200slcunblockoper unblock slc | column | Integer32 | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.21 |
| a200slcmonitorflag | column | Integer32 | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.22 |
| a200slcmonitoreerack | column | Integer32 | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.23 |
| a200slcmonitoreeshelf | column | Integer32 | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.24 |
| a200slcmonitoreeslot | column | Integer32 | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.25 |
| a200slcmonitoreeindex | column | Integer32 | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.26 |
| a200slcDialMode DDI number send mode | column | Enumeration | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.27 |
| a200slcFeedCurrent Feed current | column | mA Enumeration | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.28 |
| a200slcHighImpedanceOper Set subscriber circuit to high-impedance status. | column | Integer32 | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.29 |
| a200slcslotno \u7535\u8def\u5e8f\u53f7 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.3 |
| a200slcNoneHighImpedanceOper Set subscriber circuit to none high-impedance status. | column | Integer32 | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.30 |
| zxAnSlcDelayDialMode Delay dial mode.
noDelay(1): No delay,dial is send to PBX immediately;
delay(2): Delay until receives signal from PBX. | column | Enumeration | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.31 |
| zxAnSlcDdiTrapEnable Enables or disables DDI port trap. | column | Enumeration | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.32 |
| zxAnSlcSemiPerConnSrcIpAddr The source IP address of semi permanent connection.
The default value 0.0.0.0 means not configured. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.33 |
| zxAnSlcSemiPerConnSrcPort The source port semi permanent connection.
The default value 0 means not configured. | column | Integer32 | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.34 |
| zxAnSlcSemiPerConnDstIpAddr The destination IP address of semi permanent connection.
The default value 0.0.0.0 means not configured. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.35 |
| zxAnSlcSemiPerConnDstPort The destination port of semi permanent connection.
The default value 0 means not configured. | column | Integer32 | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.36 |
| zxAnSlcSemiPerConnSdpProfileId SDP profile ID. The default value 0 means not configured. | column | Integer32 | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.37 |
| zxAnSlcSemiPerConnSdpInformation SDP information. | column | OctetString | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.38 |
| a200slcindex \u7535\u8def\u5e8f\u53f7 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.4 |
| a200slcpkg \u7535\u8def\u652f\u6301\u7684\u5305\u7c7b\u578b\uff0c\u6309\u4f4d
\u53d6\u503c | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.5 |
| a200slcstatus \u7535\u8def\u72b6\u6001\uff0c\u6309\u4f4d\u53d6\u503c | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.6 |
| a200slcdftevent \u7535\u8def\u7f3a\u7701\u68c0\u6d4b\u4e8b\u4ef6\u7c7b\u578b
\uff0c\u6309\u4f4d\u53d6\u503c | column | Integer32 | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.7 |
| a200slcusermode | column | Enumeration | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.8 |
| a200slcFaxMode | column | Enumeration | .1.3.6.1.4.1.3902.1015.5200.3.3.1.1.9 |