zxAnServicePortUserDscp
ZTE-AN-SERVICEPORT ·
.1.3.6.1.4.1.3902.1015.8.1.1.1.19
Object
column
r/w
Integer32
User-side DSCP. When zxAnServicePortServiceMode is tagAndDscp(15), map zxAnServicePortUserDscp to zxAnUserSVidCos, translate zxAnUserInVid to zxAnUserOutCVid and zxAnUserOutSVid for upstream traffic and translate to zxAnUserInVid with zxAnUserOutSVid, zxAnUserOutCVid and zxAnServicePortUserDscp of downstream traffic.
Context
- MIB
- ZTE-AN-SERVICEPORT
- OID
.1.3.6.1.4.1.3902.1015.8.1.1.1.19- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zxAnServicePortConfEntry
- Table
- zxAnServicePortConfTable
- Siblings
- 23
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-63
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnBridgePortIndex An index for a bridge port. | column | ZTE-AN-TC-MIBZxAnIfindex | .1.3.6.1.4.1.3902.1015.8.1.1.1.1 |
| zxAnUserOutSVid User outer svlan,'0' indicates no config. | column | Integer32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.10 |
| zxAnServicePortRowStatus This object indicates the status of this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.8.1.1.1.100 |
| zxAnUserTlsVlan TLS VLAN,when zxAnServicePortServiceMode equal 'tls' then '0'
indicates untag, when zxAnServicePortServiceMode unequal to 'tls'
then '0' indicates no config | column | Integer32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.11 |
| zxAnUserSVidCos | column | Integer32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.12 |
| zxAnVlanTransMode | column | Enumeration | .1.3.6.1.4.1.3902.1015.8.1.1.1.13 |
| zxAnUserInStartVid User inner start vlan,'0' indicates untag. | column | Integer32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.14 |
| zxAnUserInEndVid User inner end vlan,'0' indicates untag. | column | Integer32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.15 |
| zxAnUserCVidCos This object indicates user egress CVLAN CoS.'0xFF' indicates no
config. | column | Integer32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.16 |
| zxAnUserInSVid User inner svlan,'0' indicates no config. | column | Integer32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.17 |
| zxAnSrvPortVlanXconnectEnable Enabling service port VLAN Xconnect means that zxAnUserOutSVid will
be forwarded without learning MAC address and configuring VLAN
Xconnect. | column | Enumeration | .1.3.6.1.4.1.3902.1015.8.1.1.1.18 |
| zxAnServicePortID An index for a service port under a bridge port,index value from 1
to 8 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.2 |
| zxAnServicePortIngressTrafficPrf Ingress traffic profile.
The zero length means not-configured. | column | OctetString | .1.3.6.1.4.1.3902.1015.8.1.1.1.20 |
| zxAnServicePortEgressTrafficPrf Egress traffic profile.
The zero length means not-configured. | column | OctetString | .1.3.6.1.4.1.3902.1015.8.1.1.1.21 |
| zxAnServicePortAdminStatus Administrative status of service port. | column | Enumeration | .1.3.6.1.4.1.3902.1015.8.1.1.1.22 |
| zxAnServicePortQueueId Service port queue ID.
Value 0xFF means not config. | column | Integer32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.23 |
| zxAnServicePortDesc A service port describe string. | column | OctetString | .1.3.6.1.4.1.3902.1015.8.1.1.1.3 |
| zxAnServicePortServiceMode A traffic type for a service port. | column | Enumeration | .1.3.6.1.4.1.3902.1015.8.1.1.1.4 |
| zxAnUserInVid User inner vlan,'0' indicates untag. | column | Integer32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.5 |
| zxAnUserInPriority User priority,from 0 to 7. | column | Integer32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.6 |
| zxAnUserEthType User Ether type, '1' indicates no config, '2' indicates pppoe, '3'
indicates ipoe,user define uses hex. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.7 |
| zxAnUserEthFilter this object indicates if filtered by ether protocol. | column | Enumeration | .1.3.6.1.4.1.3902.1015.8.1.1.1.8 |
| zxAnUserOutCVid User outer cvlan,'0' indicates no config. | column | Integer32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.9 |