zxAnServicePortID
ZTE-AN-SERVICEPORT ·
.1.3.6.1.4.1.3902.1015.8.1.1.1.2
Object
column
SNMPv2-SMIInteger32
An index for a service port under a bridge port,index value from 1 to 8
Context
- MIB
- ZTE-AN-SERVICEPORT
- OID
.1.3.6.1.4.1.3902.1015.8.1.1.1.2- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- zxAnServicePortConfEntry
- Table
- zxAnServicePortConfTable
- Siblings
- 23
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnBridgePortIndex An index for a bridge port. | column | ZTE-AN-TC-MIBZxAnIfindex | .1.3.6.1.4.1.3902.1015.8.1.1.1.1 |
| zxAnUserOutSVid User outer svlan,'0' indicates no config. | column | Integer32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.10 |
| zxAnServicePortRowStatus This object indicates the status of this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.8.1.1.1.100 |
| zxAnUserTlsVlan TLS VLAN,when zxAnServicePortServiceMode equal 'tls' then '0'
indicates untag, when zxAnServicePortServiceMode unequal to 'tls'
then '0' indicates no config | column | Integer32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.11 |
| zxAnUserSVidCos | column | Integer32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.12 |
| zxAnVlanTransMode | column | Enumeration | .1.3.6.1.4.1.3902.1015.8.1.1.1.13 |
| zxAnUserInStartVid User inner start vlan,'0' indicates untag. | column | Integer32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.14 |
| zxAnUserInEndVid User inner end vlan,'0' indicates untag. | column | Integer32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.15 |
| zxAnUserCVidCos This object indicates user egress CVLAN CoS.'0xFF' indicates no
config. | column | Integer32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.16 |
| zxAnUserInSVid User inner svlan,'0' indicates no config. | column | Integer32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.17 |
| zxAnSrvPortVlanXconnectEnable Enabling service port VLAN Xconnect means that zxAnUserOutSVid will
be forwarded without learning MAC address and configuring VLAN
Xconnect. | column | Enumeration | .1.3.6.1.4.1.3902.1015.8.1.1.1.18 |
| zxAnServicePortUserDscp User-side DSCP.
When zxAnServicePortServiceMode is tagAndDscp(15),
map zxAnServicePortUserDscp to zxAnUserSVidCos,
translate zxAnUserInVid to zxAnUserOutCVid and zxAnUserOutSVid … | column | Integer32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.19 |
| zxAnServicePortIngressTrafficPrf Ingress traffic profile.
The zero length means not-configured. | column | OctetString | .1.3.6.1.4.1.3902.1015.8.1.1.1.20 |
| zxAnServicePortEgressTrafficPrf Egress traffic profile.
The zero length means not-configured. | column | OctetString | .1.3.6.1.4.1.3902.1015.8.1.1.1.21 |
| zxAnServicePortAdminStatus Administrative status of service port. | column | Enumeration | .1.3.6.1.4.1.3902.1015.8.1.1.1.22 |
| zxAnServicePortQueueId Service port queue ID.
Value 0xFF means not config. | column | Integer32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.23 |
| zxAnServicePortDesc A service port describe string. | column | OctetString | .1.3.6.1.4.1.3902.1015.8.1.1.1.3 |
| zxAnServicePortServiceMode A traffic type for a service port. | column | Enumeration | .1.3.6.1.4.1.3902.1015.8.1.1.1.4 |
| zxAnUserInVid User inner vlan,'0' indicates untag. | column | Integer32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.5 |
| zxAnUserInPriority User priority,from 0 to 7. | column | Integer32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.6 |
| zxAnUserEthType User Ether type, '1' indicates no config, '2' indicates pppoe, '3'
indicates ipoe,user define uses hex. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.7 |
| zxAnUserEthFilter this object indicates if filtered by ether protocol. | column | Enumeration | .1.3.6.1.4.1.3902.1015.8.1.1.1.8 |
| zxAnUserOutCVid User outer cvlan,'0' indicates no config. | column | Integer32 | .1.3.6.1.4.1.3902.1015.8.1.1.1.9 |