zxAnTRPwPayloadSize

ZTE-AN-MPLS-L2VPN-MIB · .1.3.6.1.4.1.3902.1015.59.4.11.1.14
MIB view Table view

Object

column r/w bytes SNMPv2-SMIUnsigned32 
The value of this object indicates the PayLoad Size (in bytes)
to be defined during the PW setUp. Upon TX, implementation
must be capable of carrying that amount of bytes.
Upon RX, when the LEN field is set to 0, the payload of
packet  MUST assume this size, and if the actual
packet size is inconsistent with this length,
the packet MUST be considered to be malformed.

Context

MIB
ZTE-AN-MPLS-L2VPN-MIB
OID
.1.3.6.1.4.1.3902.1015.59.4.11.1.14
Type
column
Access
readwrite
Status
current
Units
bytes
Parent
zxAnTRPwEntry
Table
zxAnTRPwTable
Siblings
17

Syntax

bytes SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
zxAnTRPwIndex
Index for the conceptual row identifying a PW within this PW Emulation table.
columnZXPW-TC-STD-MIBPwIndexType.1.3.6.1.4.1.3902.1015.59.4.11.1.1
zxAnTRPwOutboundLabel
The PW label used in the outbound direction (i.e. toward the PSN). It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.3902.1015.59.4.11.1.10
zxAnTRPwInboundLabel
The PW label used in the inbound direction (i.e. packets received from the PSN. It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, …
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.3902.1015.59.4.11.1.11
zxAnTRPwOutboundTunnelLabel
The MPLS Outbound Tunnel Label.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.3902.1015.59.4.11.1.12
zxAnTRPwInboundTunnelLabel
The MPLS Inbound Tunnel Label.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.3902.1015.59.4.11.1.13
zxAnTRPwDstMac
The destination MAC address of a pseudo wire (PW) virtual connection.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.3902.1015.59.4.11.1.15
zxAnTRPwVlanId
This value indicates the vlan.
columnUnsigned32.1.3.6.1.4.1.3902.1015.59.4.11.1.16
zxAnTRPwPrio
This value indicates the priority.
columnInteger32.1.3.6.1.4.1.3902.1015.59.4.11.1.17
zxAnTRPwType
This value indicates the service to be carried over this PW.
columnZX-PWE3-MIBIANAPwTypeTC.1.3.6.1.4.1.3902.1015.59.4.11.1.2
zxAnTRPwPsnType
Set by the operator to indicates the PSN type. Based on this object, the relevant PSN table entries are created in the in the PSN specific MIB modules.
columnZX-PWE3-MIBIANAPwPsnTypeTC.1.3.6.1.4.1.3902.1015.59.4.11.1.3
zxAnTRPwRowStatus
For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.3902.1015.59.4.11.1.30
zxAnTRPwPeerIpAddrType
Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.3902.1015.59.4.11.1.4
zxAnTRPwPeerIpAddr
This object contains the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applicable.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.3902.1015.59.4.11.1.5
zxAnTRPwPeerVcId
Used in the outgoing VC ID field within the 'Virtual Circuit FEC Element' when LDP signaling is used or PW ID AVP for L2TP.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.3902.1015.59.4.11.1.6
zxAnTRPwStandbyPeerIpAddrType
Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.3902.1015.59.4.11.1.7
zxAnTRPwStandbyPeerIpAddr
This object contains the value of the standby peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applicable.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.3902.1015.59.4.11.1.8
zxAnTRPwStandbyPeerVcId
Used in the outgoing VC ID field within the 'Virtual Circuit FEC Element' when LDP signaling is used or PW ID AVP for L2TP.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.3902.1015.59.4.11.1.9