zxAnTRPwEntry

ZTE-AN-MPLS-L2VPN-MIB · .1.3.6.1.4.1.3902.1015.59.4.11.1

Object

row

A row in this table represents a pseudo wire (PW) virtual
connection across a packet network. It is indexed by
zxPwIndex, which uniquely identifying a singular
connection.
A row is created by the operator or by the agent if the PW
is created by non-SNMP application or due to auto-discovery
process.
None of the read-create objects values can be changed
when zxPwRowStatus is in the active(1) state. Changes are
allowed when the zxPwRowStatus is in notInService(2) or
notReady(3) states only.
If the operator need to change one of the values for an
active row (for example in order to fix a mismatch in
configuration between the local node and the peer), the
zxPwRowStatus should be first changed to notInService(2),
the objects may be changed now, and later to active(1)
in order to re-initiate the signaling process with the
new values in effect.

Context

MIB: ZTE-AN-MPLS-L2VPN-MIB
OID: .1.3.6.1.4.1.3902.1015.59.4.11.1
Type: row
Status: current
Parent: zxAnTRPwTable
Table: zxAnTRPwTable
Children: 18

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects

Object	Type	Syntax	OID
zxAnTRPwIndex Index for the conceptual row identifying a PW within this PW Emulation table.	column	ZXPW-TC-STD-MIBPwIndexType	`.1.3.6.1.4.1.3902.1015.59.4.11.1.1`
zxAnTRPwOutboundLabel The PW label used in the outbound direction (i.e. toward the PSN). It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.3902.1015.59.4.11.1.10`
zxAnTRPwInboundLabel The PW label used in the inbound direction (i.e. packets received from the PSN. It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, …	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.3902.1015.59.4.11.1.11`
zxAnTRPwOutboundTunnelLabel The MPLS Outbound Tunnel Label.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.3902.1015.59.4.11.1.12`
zxAnTRPwInboundTunnelLabel The MPLS Inbound Tunnel Label.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.3902.1015.59.4.11.1.13`
zxAnTRPwPayloadSize The value of this object indicates the PayLoad Size (in bytes) to be defined during the PW setUp. Upon TX, implementation must be capable of carrying that amount of bytes. Upon RX…	column	bytes SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.3902.1015.59.4.11.1.14`
zxAnTRPwDstMac The destination MAC address of a pseudo wire (PW) virtual connection.	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.3902.1015.59.4.11.1.15`
zxAnTRPwVlanId This value indicates the vlan.	column	Unsigned32	`.1.3.6.1.4.1.3902.1015.59.4.11.1.16`
zxAnTRPwPrio This value indicates the priority.	column	Integer32	`.1.3.6.1.4.1.3902.1015.59.4.11.1.17`
zxAnTRPwType This value indicates the service to be carried over this PW.	column	ZX-PWE3-MIBIANAPwTypeTC	`.1.3.6.1.4.1.3902.1015.59.4.11.1.2`
zxAnTRPwPsnType Set by the operator to indicates the PSN type. Based on this object, the relevant PSN table entries are created in the in the PSN specific MIB modules.	column	ZX-PWE3-MIBIANAPwPsnTypeTC	`.1.3.6.1.4.1.3902.1015.59.4.11.1.3`
zxAnTRPwRowStatus For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.3902.1015.59.4.11.1.30`
zxAnTRPwPeerIpAddrType Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown.	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.3902.1015.59.4.11.1.4`
zxAnTRPwPeerIpAddr This object contains the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applicable.	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.3902.1015.59.4.11.1.5`
zxAnTRPwPeerVcId Used in the outgoing VC ID field within the 'Virtual Circuit FEC Element' when LDP signaling is used or PW ID AVP for L2TP.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.3902.1015.59.4.11.1.6`
zxAnTRPwStandbyPeerIpAddrType Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown.	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.3902.1015.59.4.11.1.7`
zxAnTRPwStandbyPeerIpAddr This object contains the value of the standby peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applicable.	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.3902.1015.59.4.11.1.8`
zxAnTRPwStandbyPeerVcId Used in the outgoing VC ID field within the 'Virtual Circuit FEC Element' when LDP signaling is used or PW ID AVP for L2TP.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.3902.1015.59.4.11.1.9`

Indexes