zhoneLineStatus

ZHONE-Wan-MIB · .1.3.6.1.4.1.5504.5.2.2.1.9

Object

column Integer32

This variable indicates the Line Status of the
interface.  It contains loopback, failure,
received 'alarm' and transmitted 'alarms
information.
If the zhloopbackState bit is set, the loopback
in effect can be determined from the
loopbackConfig object.
The various bit positions are:
noAlarm(1)           No alarm present
rcvFarEndLOF(2)      Far end LOF (a.k.a., Yellow Alarm)
xmtFarEndLOF(4)      Near end sending LOF Indication
rcvAIS(8)            Far end sending AIS
xmtAIS(16)            Near end sending AIS
lossOfFrame(32       Near end LOF (a.k.a., Red Alarm)
lossOfSignal(64)      Near end Loss Of Signal
loopbackState(128)     Near end is looped
ts16AIS(256)            E1 TS16 AIS
rcvFarEndLOMF(512)    Far End Sending TS16 LOMF
xmtFarEndLOMF(1024)    Near End Sending TS16 LOMF
rcvTestCode(2048)      Near End detects a test code
otherFailure(4096)     any line status not defined here
unavailSigState(8192)  Near End in Unavailable Signal State
netEquipOOS(16384)      Carrier Equipment Out of Service

Context

MIB: ZHONE-Wan-MIB
OID: .1.3.6.1.4.1.5504.5.2.2.1.9
Type: column
Access: readonly
Status: current
Parent: zhoneDs1Entry
Table: zhoneDs1Table
Siblings: 30

Syntax

Integer32

Values & Constraints

Object Constraints

range: 1-65536

Related Objects

Sibling Objects

Object	Type	Syntax	OID
zhoneLineIndex This object should be made equal to ifIndex. Making the object equal to ifIndex allows proper use of ifStackTable and ds0/ds0bundle mibs.	column	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.5504.5.2.2.1.1`
zhoneSignalMode 'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that DS1 Robbed Bit Sig- naling is in use. 'bitOrien…	column	Enumeration	`.1.3.6.1.4.1.5504.5.2.2.1.10`
zhoneTransmitClockSource Reflects the source of Transmit Clock. 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. Only set if this DS1 has zhoneClockSourceEligibility…	column	Enumeration	`.1.3.6.1.4.1.5504.5.2.2.1.11`
zhoneFdl 'other' indicates that a protocol other than one following is used. 'ansiT1403' refers to the FDL exchange recommended by ANSI. 'att54016' refe…	column	Enumeration	`.1.3.6.1.4.1.5504.5.2.2.1.12`
zhoneInvalidIntervals The number of intervals in the range from 0 to zwValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some interva…	column	Integer32	`.1.3.6.1.4.1.5504.5.2.2.1.13`
zhoneDsxLineLength The length of the dsx wan is in feets. This objects provides information for line build out circuitry. The valid range is: 'dsx0(1)' It is 0 feet for the line build out (LBO) and…	column	Enumeration	`.1.3.6.1.4.1.5504.5.2.2.1.14`
zhoneLineStatusLastChange The value of MIB II's sysUpTime object at the time this DS1 entered its current line status state. If the current state was entered prior to the last re-initialization of the pro…	column	SNMPv2-TCTimeStamp	`.1.3.6.1.4.1.5504.5.2.2.1.15`
zhoneLineStatusChangeTrapEnable Indicates whether zhoneLineStatusChange traps should be generated for this interface.	column	Enumeration	`.1.3.6.1.4.1.5504.5.2.2.1.16`
zhoneLoopbackStatus This variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks established by a local manager and remotely from the far …	column	Integer32	`.1.3.6.1.4.1.5504.5.2.2.1.17`
zhoneDs1ChannelNumber This variable represents the channel number of the DS1/E1 on its parent Ds2/E2 or DS3/E3. A value of 0 indicated this DS1/E1 does not have a parent DS3/E3.	column	Integer32	`.1.3.6.1.4.1.5504.5.2.2.1.18`
zhoneChannelization Indicates whether this ds1/e1 is channelized or unchannelized. The value of enabledDs0 indicates that this is a DS1 channelized into DS0s. The value of enabledDs1 indicated that…	column	Enumeration	`.1.3.6.1.4.1.5504.5.2.2.1.19`
zhoneTimeElapsed The number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reason, such as an adjustment in the system's time-of-…	column	Integer32	`.1.3.6.1.4.1.5504.5.2.2.1.2`
zhoneDs1Mode 'other' wan is not in csu or dsx mode. 'dsx' T1 wan is in dsx mode. 'csu' T1 wan is in csu mode. Default setting is 'csu' for T1 platforms and 'other' for E1. …	column	Enumeration	`.1.3.6.1.4.1.5504.5.2.2.1.20`
zhoneCsuLineLength 'csu00' it is 0 dB for csu ds1 wan for line build out. 'csu75' it is -7.5 dB for line build out. 'csu150' it is -15.0 dB for line build out. 'csu225' it is -22.5 dB for line build…	column	Enumeration	`.1.3.6.1.4.1.5504.5.2.2.1.21`
zhoneClockSourceEligibility The possible values are: (1) not-eligibile - this DS1 is not eligible to be negotiated as a possible transmit clock source (2) eligible - this DS1 may be used b…	column	Enumeration	`.1.3.6.1.4.1.5504.5.2.2.1.22`
zhoneCellScramble This field describes the enabled status of the Ds1 Cell Scramble mode. If this field is true(1) then Scramble mode is enabled, if this field is false(2) scramble mode is disable..	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.5504.5.2.2.1.23`
zhoneCosetPolynomial This field describes the enabled status of the Coset Polynomial mode. If this field is true(1) then Coset Polynomial mode is enabled, if this field is false(2) Coset Polynomial mo…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.5504.5.2.2.1.24`
zhoneDs1ProtocolEmulation Indicates whether the device is acting as Network-side or CPE with respect to this DS1. For example, if the system is configured with a PBX on the network side of the device, t…	column	Enumeration	`.1.3.6.1.4.1.5504.5.2.2.1.25`
zhoneDs1SignalType The signaling type of the FXS interfaces within this DS1.	column	Enumeration	`.1.3.6.1.4.1.5504.5.2.2.1.26`
zhoneDs1GroupIndex The Group index this Ds1 belongs to	column	Integer32	`.1.3.6.1.4.1.5504.5.2.2.1.27`
zhoneDs1LinePower Enable or disable line power for the DS1 interface.	column	Enumeration	`.1.3.6.1.4.1.5504.5.2.2.1.28`
zhoneDs1TimeslotAssignment This table entry is a bit field indicating which timeslots in a ds1 are used (or assigned). Default for DS1 based card: 1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+…	column	Bits	`.1.3.6.1.4.1.5504.5.2.2.1.29`
zhoneValidIntervals The numberof previous near end intervals for which data was collected. The value will be 96 unless the interface was brouht online within the last 24 hours, in which case the valu…	column	Integer32	`.1.3.6.1.4.1.5504.5.2.2.1.3`
zhoneDs1TxClockRecovery obsolete PWE transmit clock recovery method	column	Enumeration	`.1.3.6.1.4.1.5504.5.2.2.1.30`
zhoneDs1TxClockAdaptiveQuality Determines sync drift when operating in PWE adaptive mode. Values reflect ANSI Standard T1.101 reference clock quality.	column	Enumeration	`.1.3.6.1.4.1.5504.5.2.2.1.31`
zhoneLineType This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably car…	column	Enumeration	`.1.3.6.1.4.1.5504.5.2.2.1.4`
zhoneLineCoding This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. jbzs refers the Jammed Bit Zero Suppres…	column	Enumeration	`.1.3.6.1.4.1.5504.5.2.2.1.5`
zhoneSendCode This variable indicates what type of code is being sent across the DS1 interface by the device. Setting this variable causes the interface to send the code requested. The values …	column	Enumeration	`.1.3.6.1.4.1.5504.5.2.2.1.6`
zhoneCircuitIdentifier This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.	column	Zhone-TCZhoneAdminString	`.1.3.6.1.4.1.5504.5.2.2.1.7`
zhoneLoopbackConfig This variable represents the desired loopback configuration of the DS1 interface. Agents supporting read/write access should return inconsistentValue in response to a requested l…	column	Enumeration	`.1.3.6.1.4.1.5504.5.2.2.1.8`