zhoneCsuLineLength
ZHONE-Wan-MIB ·
.1.3.6.1.4.1.5504.5.2.2.1.21
Object
column
r/w
Enumeration
'csu00' it is 0 dB for csu ds1 wan for line build out.
'csu75' it is -7.5 dB for line build out.
'csu150' it is -15.0 dB for line build out.
'csu225' it is -22.5 dB for line build out (LBO).
This field is not used for E1 platforms.
Context
- MIB
- ZHONE-Wan-MIB
- OID
.1.3.6.1.4.1.5504.5.2.2.1.21- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zhoneDs1Entry
- Table
- zhoneDs1Table
- Siblings
- 30
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | csu00 |
2 | csu75 |
3 | csu150 |
4 | csu225 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zhoneLineIndex This object should be made equal to ifIndex.
Making the object equal to ifIndex allows proper
use of ifStackTable and ds0/ds0bundle mibs. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.5504.5.2.2.1.1 |
| zhoneSignalMode 'none' indicates that no bits are reserved for
signaling on this channel.
'robbedBit' indicates that DS1 Robbed Bit Sig-
naling is in use.
'bitOrien… | column | Enumeration | .1.3.6.1.4.1.5504.5.2.2.1.10 |
| zhoneTransmitClockSource Reflects the source of Transmit Clock.
'loopTiming' indicates that the recovered receive clock
is used as the transmit clock.
Only set if this DS1 has zhoneClockSourceEligibility… | column | Enumeration | .1.3.6.1.4.1.5504.5.2.2.1.11 |
| zhoneFdl 'other' indicates that a protocol other than
one following is used.
'ansiT1403' refers to the FDL exchange
recommended by ANSI.
'att54016' refe… | column | Enumeration | .1.3.6.1.4.1.5504.5.2.2.1.12 |
| zhoneInvalidIntervals The number of intervals in the range from 0 to
zwValidIntervals for which no data is
available. This object will typically be zero
except in cases where the data for some interva… | column | Integer32 | .1.3.6.1.4.1.5504.5.2.2.1.13 |
| zhoneDsxLineLength The length of the dsx wan is in feets. This
objects provides information for line build out
circuitry. The valid range is:
'dsx0(1)' It is 0 feet for the line build out (LBO) and… | column | Enumeration | .1.3.6.1.4.1.5504.5.2.2.1.14 |
| zhoneLineStatusLastChange The value of MIB II's sysUpTime object at the
time this DS1 entered its current line status
state. If the current state was entered prior to
the last re-initialization of the pro… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.5504.5.2.2.1.15 |
| zhoneLineStatusChangeTrapEnable Indicates whether zhoneLineStatusChange traps
should be generated for this interface. | column | Enumeration | .1.3.6.1.4.1.5504.5.2.2.1.16 |
| zhoneLoopbackStatus This variable represents the current state of the
loopback on the DS1 interface. It contains
information about loopbacks established by a
local manager and remotely from the far … | column | Integer32 | .1.3.6.1.4.1.5504.5.2.2.1.17 |
| zhoneDs1ChannelNumber This variable represents the channel number of
the DS1/E1 on its parent Ds2/E2 or DS3/E3. A
value of 0 indicated this DS1/E1 does not have a
parent DS3/E3. | column | Integer32 | .1.3.6.1.4.1.5504.5.2.2.1.18 |
| zhoneChannelization Indicates whether this ds1/e1 is channelized or
unchannelized. The value of enabledDs0 indicates
that this is a DS1 channelized into DS0s. The
value of enabledDs1 indicated that… | column | Enumeration | .1.3.6.1.4.1.5504.5.2.2.1.19 |
| zhoneTimeElapsed The number of seconds that have elapsed since
the beginning of the near end current error-
measurement period. If, for some reason, such
as an adjustment in the system's time-of-… | column | Integer32 | .1.3.6.1.4.1.5504.5.2.2.1.2 |
| zhoneDs1Mode 'other' wan is not in csu or dsx mode.
'dsx' T1 wan is in dsx mode.
'csu' T1 wan is in csu mode.
Default setting is 'csu' for T1 platforms and
'other' for E1.
… | column | Enumeration | .1.3.6.1.4.1.5504.5.2.2.1.20 |
| zhoneClockSourceEligibility The possible values are:
(1) not-eligibile - this DS1 is not eligible to be negotiated
as a possible transmit clock source
(2) eligible - this DS1 may be used b… | column | Enumeration | .1.3.6.1.4.1.5504.5.2.2.1.22 |
| zhoneCellScramble This field describes the enabled status of the Ds1 Cell Scramble mode. If this
field is true(1) then Scramble mode is enabled, if this field is
false(2) scramble mode is disable.. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.5.2.2.1.23 |
| zhoneCosetPolynomial This field describes the enabled status of the Coset Polynomial mode. If this
field is true(1) then Coset Polynomial mode is enabled, if this field is
false(2) Coset Polynomial mo… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.5.2.2.1.24 |
| zhoneDs1ProtocolEmulation Indicates whether the device is acting as Network-side
or CPE with respect to this DS1. For example, if
the system is configured with a PBX on the network
side of the device, t… | column | Enumeration | .1.3.6.1.4.1.5504.5.2.2.1.25 |
| zhoneDs1SignalType The signaling type of the FXS interfaces
within this DS1. | column | Enumeration | .1.3.6.1.4.1.5504.5.2.2.1.26 |
| zhoneDs1GroupIndex The Group index this Ds1 belongs to | column | Integer32 | .1.3.6.1.4.1.5504.5.2.2.1.27 |
| zhoneDs1LinePower Enable or disable line power for the DS1 interface. | column | Enumeration | .1.3.6.1.4.1.5504.5.2.2.1.28 |
| zhoneDs1TimeslotAssignment This table entry is a bit field indicating which timeslots
in a ds1 are used (or assigned).
Default for DS1 based card:
1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+… | column | Bits | .1.3.6.1.4.1.5504.5.2.2.1.29 |
| zhoneValidIntervals The numberof previous near end intervals for
which data was collected. The value will be
96 unless the interface was brouht online within
the last 24 hours, in which case the valu… | column | Integer32 | .1.3.6.1.4.1.5504.5.2.2.1.3 |
| zhoneDs1TxClockRecovery obsolete PWE transmit clock recovery method | column | Enumeration | .1.3.6.1.4.1.5504.5.2.2.1.30 |
| zhoneDs1TxClockAdaptiveQuality Determines sync drift when operating in PWE adaptive
mode. Values reflect ANSI Standard T1.101 reference
clock quality. | column | Enumeration | .1.3.6.1.4.1.5504.5.2.2.1.31 |
| zhoneLineType This variable indicates the variety of DS1
Line implementing this circuit. The type of
circuit affects the number of bits per second
that the circuit can reasonably car… | column | Enumeration | .1.3.6.1.4.1.5504.5.2.2.1.4 |
| zhoneLineCoding This variable describes the variety of Zero Code
Suppression used on this interface, which in turn
affects a number of its characteristics.
jbzs refers the Jammed Bit Zero Suppres… | column | Enumeration | .1.3.6.1.4.1.5504.5.2.2.1.5 |
| zhoneSendCode This variable indicates what type of code is
being sent across the DS1 interface by the device.
Setting this variable causes the interface to send
the code requested. The values … | column | Enumeration | .1.3.6.1.4.1.5504.5.2.2.1.6 |
| zhoneCircuitIdentifier This variable contains the transmission vendor's
circuit identifier, for the purpose of
facilitating troubleshooting. | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.5.2.2.1.7 |
| zhoneLoopbackConfig This variable represents the desired loopback
configuration of the DS1 interface. Agents
supporting read/write access should return
inconsistentValue in response to a requested
l… | column | Enumeration | .1.3.6.1.4.1.5504.5.2.2.1.8 |
| zhoneLineStatus This variable indicates the Line Status of the
interface. It contains loopback, failure,
received 'alarm' and transmitted 'alarms
information.
If the zhloopbackState bit is set, … | column | Integer32 | .1.3.6.1.4.1.5504.5.2.2.1.9 |