subVoiceFeatureSetOne
ZHONE-GEN-SUBSCRIBER ·
.1.3.6.1.4.1.5504.3.4.1.5.1.9
Object
column
r/w
Bits
First set of features that are enabled for the subscriber.
Absence of the feature in the list will disable the feature
for the subscriber.
Bit Feature
^^^ ^^^^^^^
1 hookflash detection
2 onhook signaling
3 always offhook, call is established as soon as
incoming call initiation is made.
4 plar.
5 Call Wait
6 Call Transfer
7 Conference (3-way local conference bridging)
8 Line side supervision through Reverse Battery
9 Voice Only
10 Hotline
11 Warmline
12 Line side supervision through tone
13 DTMF mode as RFC-2833
14 DTMF mode as inband
15 COD - Enable Call on Disconnect for SIP
16 Dataonly
17 Centrex - Enable centrex based features.
Context
- MIB
- ZHONE-GEN-SUBSCRIBER
- OID
.1.3.6.1.4.1.5504.3.4.1.5.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- subVoiceConnectionEntry
- Table
- subVoiceConnectionTable
- Siblings
- 8
Syntax
Bits
Values & Constraints
Enumerated Values
0 | hookflash |
1 | onhooksignaling |
2 | alwaysoffhook |
3 | plar |
4 | callwait |
5 | calltransfer |
6 | conference |
7 | lss-rb |
8 | voiceonly |
9 | hotline |
10 | warmline |
11 | lss-tone |
12 | dtmf-rfc2833 |
13 | dtmf-inband |
14 | cod |
15 | dataonly |
16 | centrex |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| subVoiceConnectionIndex The connection index is used to indentify this connection
pair. The number itself is meaningful only for defining
a connection set for this subscriber/lgid pair and no
association… | column | Integer32 | .1.3.6.1.4.1.5504.3.4.1.5.1.1 |
| subVoiceConnectionType This describes the connection type between the two end
points referred to by the subVoiceEndPointProtocol
indices. Where applicable the first endpoint refers to
the line or premi… | column | Enumeration | .1.3.6.1.4.1.5504.3.4.1.5.1.2 |
| subVoiceEndPoint1AddressIndex The index into the associated address table for this
end point. EndPoint1 should describe the line or premise
side of the connection where applicable.
This table co… | column | Integer32 | .1.3.6.1.4.1.5504.3.4.1.5.1.3 |
| subVoiceEndPoint2AddressIndex The index into the associated address table for this
end point. EndPoint2 should describe the central office
side of the connection where applicable.
This table con… | column | Integer32 | .1.3.6.1.4.1.5504.3.4.1.5.1.4 |
| subVoiceConnectionDescription A text string describing this voice call entry.This value
is not used by the system and is provided for
operator reference only. A common use will be to define
the external or p… | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.3.4.1.5.1.5 |
| subVoiceAdminStatus The Admin State for this connection.
Required for row creation. | column | Enumeration | .1.3.6.1.4.1.5504.3.4.1.5.1.6 |
| subVoiceRowStatus Used to control row creation and deletion.
A row in this table is created using a
single SNMP SET request with varbinds for:
a) subVoiceRowStatus set to'CreateAnd… | column | Zhone-TCZhoneRowStatus | .1.3.6.1.4.1.5504.3.4.1.5.1.7 |
| subVoiceHuntGroup Is this connection part of a huntGroup? Currently this is only valid
if connection type is sipToDs1 or sipToPots. If this is TRUE then EndPoint2
does not contain any protocol spec… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.3.4.1.5.1.8 |