fltStmtModifier

ZHONE-COM-IP-FILTER-MIB · .1.3.6.1.4.1.5504.4.1.8.3.1.16

Object

column r/w Bits

Filter statement modifier.  The bits set in this object
logically negate the results of the comparisons made on
their respecive fields as shown :
              
    notIpSrcAddr(1)  : fltStmtIpSrcAddrLow, fltStmtIpSrcAddrHigh
    notSrcPort(2)    : fltStmtSrcPortLow, fltStmtSrcPortHigh
    notIpDstAddr(3)  : fltStmtIpDstAddrLow, fltStmtIpDstAddrHigh
    notDstPort(4)    : fltStmtDstPortLow, fltStmtDstPortHigh
    notIpProtocol(5) : fltStmtIpProtocol
    notArbitrary(6)  : fltStmtArbValueLow, fltStmtArbValueHigh
    notStatement(7)  : negate outcome of the entire statement
              
No bits set (the default) specifies to use all outcomes as is.

Context

MIB: ZHONE-COM-IP-FILTER-MIB
OID: .1.3.6.1.4.1.5504.4.1.8.3.1.16
Type: column
Access: readwrite
Status: current
Parent: filterStatementEntry
Table: filterStatementTable
Siblings: 18

Syntax

Bits

Values & Constraints

Enumerated Values

`0`	notIpSrc
`1`	notSrcPort
`2`	notDstIp
`3`	notPortDst
`4`	notProtocol
`5`	notArbitrary
`6`	notStatement

Related Objects

Sibling Objects

Object	Type	Syntax	OID
fltStmtIndex The table index that identifies a filter statement. These indicies should be sparse to allow for insertion into the list.	column	Integer32	`.1.3.6.1.4.1.5504.4.1.8.3.1.1`
fltStmtIpProtocol The IP protocol value that is to be matched. The enum values are as follows: any(1) : any protocol type is a match (wildcard) ip(2) : raw IP packet …	column	Enumeration	`.1.3.6.1.4.1.5504.4.1.8.3.1.10`
fltStmtArbValueBase This field identifies the protocol header to which the arbitrary value comparison applies. The enum values are as follows: none(1) : no arbitrary value c…	column	Enumeration	`.1.3.6.1.4.1.5504.4.1.8.3.1.11`
fltStmtArbOffset The offset, in octets, from the beginning of the header to the most significant octet for the arbitrary value comparison.	column	Integer32	`.1.3.6.1.4.1.5504.4.1.8.3.1.12`
fltStmtArbMask This object is mask for for arbitrary value comparisons. The non-zero bits in this field determine the size of the arbitrary field.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.5504.4.1.8.3.1.13`
fltStmtArbValueLow This object is the inclusive lower bound for arbitrary value comparison. See the filterStatementEntry description for details.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.5504.4.1.8.3.1.14`
fltStmtArbValueHigh This object is the inclusive upper bound for arbitrary value comparison. See the filterStatementEntry description for details.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.5504.4.1.8.3.1.15`
fltStmtAction Filter statement action. The bits set in this object specify actions to take on packets matching this statement. Supported actions are: reset(0) : Return a …	column	Bits	`.1.3.6.1.4.1.5504.4.1.8.3.1.17`
fltStmtActionArg Filter statement action argument. The meaning of this object depends on the value of fltStmtAction: forward(3) : An IP address to forward the packet to. The …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.5504.4.1.8.3.1.18`
fltStmtRowStatus Zhone convention to support row creation and deletion. This is the only object required to create or destroy a row in this table.	column	Zhone-TCZhoneRowStatus	`.1.3.6.1.4.1.5504.4.1.8.3.1.19`
fltStmtIpSrcAddrLow The inclusive lower bound for the source IP address range. See the filterStatementEntry description for details.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.5504.4.1.8.3.1.2`
fltStmtIpSrcAddrHigh The inclusive upper bound for the source IP address range. See the filterStatementEntry description for details.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.5504.4.1.8.3.1.3`
fltStmtSrcPortLow The inclusive lower bound for the transport layer source port range. See the filterStatementEntry description for details.	column	Integer32	`.1.3.6.1.4.1.5504.4.1.8.3.1.4`
fltStmtSrcPortHigh The inclusive upper bound for the transport layer source port range. See the filterStatementEntry description for details.	column	Integer32	`.1.3.6.1.4.1.5504.4.1.8.3.1.5`
fltStmtIpDstAddrLow The inclusive lower bound for the destination IP address range. See the filterStatementEntry description for details.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.5504.4.1.8.3.1.6`
fltStmtIpDstAddrHigh The inclusive upper bound for the destination IP address range. See the filterStatementEntry description for details.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.5504.4.1.8.3.1.7`
fltStmtDstPortLow The inclusive lower bound for the transport layer destination port range. See the filterStatementEntry description for details.	column	Integer32	`.1.3.6.1.4.1.5504.4.1.8.3.1.8`
fltStmtDstPortHigh The inclusive upper bound for the transport layer destination port range. See the filterStatementEntry description for details.	column	Integer32	`.1.3.6.1.4.1.5504.4.1.8.3.1.9`