fltStmtArbValueBase

ZHONE-COM-IP-FILTER-MIB · .1.3.6.1.4.1.5504.4.1.8.3.1.11

Object

column r/w Enumeration

This field identifies the protocol header to which the
arbitrary value comparison applies.  The enum values are
as follows:
              
    none(1)       : no arbitrary value comparison
    ip(2)         : base is IP header
    udp(3)        : base is UDP header
    tcp(4)        : base is TCP header
    icmp(5)       : base is ICMP header
    ipOptions(6)  : base is IP options header
    tcpOptions(7) : base is TCP options header
              
The default value is none(1).

Context

MIB: ZHONE-COM-IP-FILTER-MIB
OID: .1.3.6.1.4.1.5504.4.1.8.3.1.11
Type: column
Access: readwrite
Status: current
Parent: filterStatementEntry
Table: filterStatementTable
Siblings: 18

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	none
`2`	ip
`3`	udp
`4`	tcp
`5`	icmp
`6`	ipOptions
`7`	tcpOptions

Related Objects

Sibling Objects

Object	Type	Syntax	OID
fltStmtIndex The table index that identifies a filter statement. These indicies should be sparse to allow for insertion into the list.	column	Integer32	`.1.3.6.1.4.1.5504.4.1.8.3.1.1`
fltStmtIpProtocol The IP protocol value that is to be matched. The enum values are as follows: any(1) : any protocol type is a match (wildcard) ip(2) : raw IP packet …	column	Enumeration	`.1.3.6.1.4.1.5504.4.1.8.3.1.10`
fltStmtArbOffset The offset, in octets, from the beginning of the header to the most significant octet for the arbitrary value comparison.	column	Integer32	`.1.3.6.1.4.1.5504.4.1.8.3.1.12`
fltStmtArbMask This object is mask for for arbitrary value comparisons. The non-zero bits in this field determine the size of the arbitrary field.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.5504.4.1.8.3.1.13`
fltStmtArbValueLow This object is the inclusive lower bound for arbitrary value comparison. See the filterStatementEntry description for details.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.5504.4.1.8.3.1.14`
fltStmtArbValueHigh This object is the inclusive upper bound for arbitrary value comparison. See the filterStatementEntry description for details.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.5504.4.1.8.3.1.15`
fltStmtModifier Filter statement modifier. The bits set in this object logically negate the results of the comparisons made on their respecive fields as shown : notIpSrcAddr(1…	column	Bits	`.1.3.6.1.4.1.5504.4.1.8.3.1.16`
fltStmtAction Filter statement action. The bits set in this object specify actions to take on packets matching this statement. Supported actions are: reset(0) : Return a …	column	Bits	`.1.3.6.1.4.1.5504.4.1.8.3.1.17`
fltStmtActionArg Filter statement action argument. The meaning of this object depends on the value of fltStmtAction: forward(3) : An IP address to forward the packet to. The …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.5504.4.1.8.3.1.18`
fltStmtRowStatus Zhone convention to support row creation and deletion. This is the only object required to create or destroy a row in this table.	column	Zhone-TCZhoneRowStatus	`.1.3.6.1.4.1.5504.4.1.8.3.1.19`
fltStmtIpSrcAddrLow The inclusive lower bound for the source IP address range. See the filterStatementEntry description for details.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.5504.4.1.8.3.1.2`
fltStmtIpSrcAddrHigh The inclusive upper bound for the source IP address range. See the filterStatementEntry description for details.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.5504.4.1.8.3.1.3`
fltStmtSrcPortLow The inclusive lower bound for the transport layer source port range. See the filterStatementEntry description for details.	column	Integer32	`.1.3.6.1.4.1.5504.4.1.8.3.1.4`
fltStmtSrcPortHigh The inclusive upper bound for the transport layer source port range. See the filterStatementEntry description for details.	column	Integer32	`.1.3.6.1.4.1.5504.4.1.8.3.1.5`
fltStmtIpDstAddrLow The inclusive lower bound for the destination IP address range. See the filterStatementEntry description for details.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.5504.4.1.8.3.1.6`
fltStmtIpDstAddrHigh The inclusive upper bound for the destination IP address range. See the filterStatementEntry description for details.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.5504.4.1.8.3.1.7`
fltStmtDstPortLow The inclusive lower bound for the transport layer destination port range. See the filterStatementEntry description for details.	column	Integer32	`.1.3.6.1.4.1.5504.4.1.8.3.1.8`
fltStmtDstPortHigh The inclusive upper bound for the transport layer destination port range. See the filterStatementEntry description for details.	column	Integer32	`.1.3.6.1.4.1.5504.4.1.8.3.1.9`