wlBaseCfgRTSThreshold
ZHNWIRELESS ·
.1.3.6.1.4.1.5504.2.5.46.1.1.1.16
Object
The packet size of a request-to-send (RTS) transmission. A low threshold implies RTS packets are sent more frequently, thus requiring more bandwidth but ensuring packet transmission on a busy network.
Context
- MIB
- ZHNWIRELESS
- OID
.1.3.6.1.4.1.5504.2.5.46.1.1.1.16- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- wlBaseCfgEntry
- Table
- wlBaseCfgTable
- Siblings
- 31
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wlBaseCfgIndex Basic wireless adapter interface index. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.46.1.1.1.1 |
| wlBaseCfgMimoNProtection Multiple Input Multiple Output(MIMO) 802.11n protection mode.
Enumeration of:
off(1),
auto(2), | column | WlMimoNProtectionModes | .1.3.6.1.4.1.5504.2.5.46.1.1.1.10 |
| wlBaseCfgNClientsOnly Enable or disable the restriction of access to 802.11n
clients, only. When enabled, prevent 802.11b/g clients
from connecting. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.46.1.1.1.11 |
| wlBaseCfg54gRate The rate when the radio is operating in 802.11g mode. This
object only applies when the Multiple Input Multiple Output
(MIMO) 802.11n Rate is set to use54g(2). Enumeration of:
… | column | Wl54gMulticastRates | .1.3.6.1.4.1.5504.2.5.46.1.1.1.12 |
| wlBaseCfgMulticastRate The rate for multicast traffic. Enumeration of:
rate1M(1),
rate2M(2),
rate5Dot5M(3),
rate6M(4),
rate9M(5),
rate11M(6),
rate12M(7),
rate18M(8),
rate24M(9),
rate36M(10),
rate48M(11)… | column | Wl54gMulticastRates | .1.3.6.1.4.1.5504.2.5.46.1.1.1.13 |
| wlBaseCfgBasicRate The rate when the radio is operating in basic 802.11b/g mode.
Enumeration of:
default(1), -- use the factory defaulted basic rate
all(2), -- allow … | column | WlBasicRates | .1.3.6.1.4.1.5504.2.5.46.1.1.1.14 |
| wlBaseCfgFragThreshold The threshold at which packets are fragmented. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.46.1.1.1.15 |
| wlBaseCfgDTIMInterval The interval at which Delivery Traffic Indication Messages (DTIM)
are generated. A DTIM message notifies a wireless client that
a packet is waiting for tranmission. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.46.1.1.1.17 |
| wlBaseCfgBeaconInterval The interval at which Beacons are generated. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.46.1.1.1.18 |
| wlBaseCfgGlobalMaxClients The maximum number of wireless client devices that may be simultaneously
connected to the radio. This value should include the sum total of all
clients on all active SSIDs. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.46.1.1.1.19 |
| wlBaseCfgEnable Enable or disable the wireless adapter. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.46.1.1.1.2 |
| wlBaseCfgXPress Enable or disable the XPress(TM) Technology. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.46.1.1.1.20 |
| wlBaseCfgTxPowerPercent The percentage of total power that should be used for data transmissions. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.46.1.1.1.21 |
| wlBaseCfgWMMEnable Enable or disable Wifi Multimedia. When set to TRUE, audio,
video and voice application data is prioritized over other network
traffic. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.46.1.1.1.22 |
| wlBaseCfgWMMNoAck Enable or disable the suppression of acknowledgements for frames
that do not require a QOS Acknowledgement. This avoids the unnecessary
transmission of acknowledgements for highly… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.46.1.1.1.23 |
| wlBaseCfgWMMApsd Enable or disable the Automatic Power Save Delivery (APSD) power
management method. This feature is useful for bi-directional applications,
such as VoIp phones. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.46.1.1.1.24 |
| wlBaseCfgWpsAddClientMethod Configure the method of adding Clients:
pushButton(1),
accessPointPIN(2),
stationPIN(3) | column | WlWpsAddClientMethod | .1.3.6.1.4.1.5504.2.5.46.1.1.1.25 |
| wlBaseCfgWpsApMode Enable or disable WiFi Protected Setup (WPS) AP mode. If your provider
is using an external registrar for security, select true(1).
The PIN for AP mode is specified by the registr… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.46.1.1.1.26 |
| wlBaseCfgWpsConfigAp Start AP configuration. If your provider is using an external registrar
for security, wlBaseCfgWpsApMode then select true(1) to begin the
registration process with the client. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.46.1.1.1.27 |
| wlBaseCfgWpsDevicePIN Device PIN provided by external registrar. | column | OctetString | .1.3.6.1.4.1.5504.2.5.46.1.1.1.28 |
| wlBaseCfgWpsAddEnrollee Start AP configuration. If wlBaseCfgWpsAddClientMethod is set for
pushButton(1), then the user must simultaneously push the WPS button
on the rear panel of the wireless zNID and s… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.46.1.1.1.29 |
| wlBaseCfgBand Broadcast band (e.g. 2.4GHz operation). | column | OctetString | .1.3.6.1.4.1.5504.2.5.46.1.1.1.3 |
| wlBaseCfgWpsStationPIN Station PIN provided by user. | column | OctetString | .1.3.6.1.4.1.5504.2.5.46.1.1.1.30 |
| wlBaseCfgBridgeRestrictMode Configure the bridge restriction mode:
enable(1),
enableScan(2),
disable(3), | column | WlBridgeRestrictModes | .1.3.6.1.4.1.5504.2.5.46.1.1.1.31 |
| wlBaseCfgBridgeRefresh Scans for any wireless bridge devices in range and displays them in
the Remote Bridge MAC Address table. Selecting true(1) will update the
wireless bridge devices in range. Wait f… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.46.1.1.1.32 |
| wlBaseCfgChannel The configured wifi channel number or 'auto' for
automatic selection of a channel with low interference. | column | WlChannelSelections | .1.3.6.1.4.1.5504.2.5.46.1.1.1.4 |
| wlBaseCfgCurrentChannel The actual wifi channel number in use. | column | WlChannelSelections | .1.3.6.1.4.1.5504.2.5.46.1.1.1.5 |
| wlBaseCfgBandwidth Aggregate radio bandwidth. | column | OctetString | .1.3.6.1.4.1.5504.2.5.46.1.1.1.6 |
| wlBaseCfgAutoScanTimer When configured for auto mode, this timer value specifies how
often to re-analyze the spectrum to select a low interference
channel. Note: auto channel rescan will only occur when… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.46.1.1.1.7 |
| wlBaseCfgMimoNEwc Radio 802.11n Enhanced Wireless Consortium (EWC) mode:
auto(1)
disable(2) | column | WlMimoNEwcModes | .1.3.6.1.4.1.5504.2.5.46.1.1.1.8 |
| wlBaseCfgMimoNRate The configured Multiple Input Multiple Output (MIMO) 802.11n rate.
Enumeration of:
auto(1),
use54g(2),
rate6Dot5(3),
rate13(4)… | column | WlMimoNRates | .1.3.6.1.4.1.5504.2.5.46.1.1.1.9 |