wlBaseCfgMulticastRate

ZHNWIRELESS · .1.3.6.1.4.1.5504.2.5.46.1.1.1.13
MIB view Table view

Object

column r/w Wl54gMulticastRates 
The rate for multicast traffic. Enumeration of:
rate1M(1),
rate2M(2),
rate5Dot5M(3),
rate6M(4),
rate9M(5),
rate11M(6),
rate12M(7),
rate18M(8),
rate24M(9),
rate36M(10),
rate48M(11),
rate54M(12)

Context

MIB
ZHNWIRELESS
OID
.1.3.6.1.4.1.5504.2.5.46.1.1.1.13
Type
column
Access
readwrite
Status
current
Parent
wlBaseCfgEntry
Table
wlBaseCfgTable
Siblings
31

Syntax

Wl54gMulticastRates
Source
Wl54gMulticastRates
Base type
Enumeration

Values & Constraints

Type Values
1rate1M
2rate2M
3rate5Dot5M
4rate6M
5rate9M
6rate11M
7rate12M
8rate18M
9rate24M
10rate36M
11rate48M
12rate54M
13auto

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
wlBaseCfgIndex
Basic wireless adapter interface index.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.2.5.46.1.1.1.1
wlBaseCfgMimoNProtection
Multiple Input Multiple Output(MIMO) 802.11n protection mode. Enumeration of: off(1), auto(2),
columnWlMimoNProtectionModes.1.3.6.1.4.1.5504.2.5.46.1.1.1.10
wlBaseCfgNClientsOnly
Enable or disable the restriction of access to 802.11n clients, only. When enabled, prevent 802.11b/g clients from connecting.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.2.5.46.1.1.1.11
wlBaseCfg54gRate
The rate when the radio is operating in 802.11g mode. This object only applies when the Multiple Input Multiple Output (MIMO) 802.11n Rate is set to use54g(2). Enumeration of: …
columnWl54gMulticastRates.1.3.6.1.4.1.5504.2.5.46.1.1.1.12
wlBaseCfgBasicRate
The rate when the radio is operating in basic 802.11b/g mode. Enumeration of: default(1), -- use the factory defaulted basic rate all(2), -- allow …
columnWlBasicRates.1.3.6.1.4.1.5504.2.5.46.1.1.1.14
wlBaseCfgFragThreshold
The threshold at which packets are fragmented.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.2.5.46.1.1.1.15
wlBaseCfgRTSThreshold
The packet size of a request-to-send (RTS) transmission. A low threshold implies RTS packets are sent more frequently, thus requiring more bandwidth but ensuring packet transmissi…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.2.5.46.1.1.1.16
wlBaseCfgDTIMInterval
The interval at which Delivery Traffic Indication Messages (DTIM) are generated. A DTIM message notifies a wireless client that a packet is waiting for tranmission.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.2.5.46.1.1.1.17
wlBaseCfgBeaconInterval
The interval at which Beacons are generated.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.2.5.46.1.1.1.18
wlBaseCfgGlobalMaxClients
The maximum number of wireless client devices that may be simultaneously connected to the radio. This value should include the sum total of all clients on all active SSIDs.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.2.5.46.1.1.1.19
wlBaseCfgEnable
Enable or disable the wireless adapter.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.2.5.46.1.1.1.2
wlBaseCfgXPress
Enable or disable the XPress(TM) Technology.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.2.5.46.1.1.1.20
wlBaseCfgTxPowerPercent
The percentage of total power that should be used for data transmissions.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.2.5.46.1.1.1.21
wlBaseCfgWMMEnable
Enable or disable Wifi Multimedia. When set to TRUE, audio, video and voice application data is prioritized over other network traffic.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.2.5.46.1.1.1.22
wlBaseCfgWMMNoAck
Enable or disable the suppression of acknowledgements for frames that do not require a QOS Acknowledgement. This avoids the unnecessary transmission of acknowledgements for highly…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.2.5.46.1.1.1.23
wlBaseCfgWMMApsd
Enable or disable the Automatic Power Save Delivery (APSD) power management method. This feature is useful for bi-directional applications, such as VoIp phones.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.2.5.46.1.1.1.24
wlBaseCfgWpsAddClientMethod
Configure the method of adding Clients: pushButton(1), accessPointPIN(2), stationPIN(3)
columnWlWpsAddClientMethod.1.3.6.1.4.1.5504.2.5.46.1.1.1.25
wlBaseCfgWpsApMode
Enable or disable WiFi Protected Setup (WPS) AP mode. If your provider is using an external registrar for security, select true(1). The PIN for AP mode is specified by the registr…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.2.5.46.1.1.1.26
wlBaseCfgWpsConfigAp
Start AP configuration. If your provider is using an external registrar for security, wlBaseCfgWpsApMode then select true(1) to begin the registration process with the client.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.2.5.46.1.1.1.27
wlBaseCfgWpsDevicePIN
Device PIN provided by external registrar.
columnOctetString.1.3.6.1.4.1.5504.2.5.46.1.1.1.28
wlBaseCfgWpsAddEnrollee
Start AP configuration. If wlBaseCfgWpsAddClientMethod is set for pushButton(1), then the user must simultaneously push the WPS button on the rear panel of the wireless zNID and s…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.2.5.46.1.1.1.29
wlBaseCfgBand
Broadcast band (e.g. 2.4GHz operation).
columnOctetString.1.3.6.1.4.1.5504.2.5.46.1.1.1.3
wlBaseCfgWpsStationPIN
Station PIN provided by user.
columnOctetString.1.3.6.1.4.1.5504.2.5.46.1.1.1.30
wlBaseCfgBridgeRestrictMode
Configure the bridge restriction mode: enable(1), enableScan(2), disable(3),
columnWlBridgeRestrictModes.1.3.6.1.4.1.5504.2.5.46.1.1.1.31
wlBaseCfgBridgeRefresh
Scans for any wireless bridge devices in range and displays them in the Remote Bridge MAC Address table. Selecting true(1) will update the wireless bridge devices in range. Wait f…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.2.5.46.1.1.1.32
wlBaseCfgChannel
The configured wifi channel number or 'auto' for automatic selection of a channel with low interference.
columnWlChannelSelections.1.3.6.1.4.1.5504.2.5.46.1.1.1.4
wlBaseCfgCurrentChannel
The actual wifi channel number in use.
columnWlChannelSelections.1.3.6.1.4.1.5504.2.5.46.1.1.1.5
wlBaseCfgBandwidth
Aggregate radio bandwidth.
columnOctetString.1.3.6.1.4.1.5504.2.5.46.1.1.1.6
wlBaseCfgAutoScanTimer
When configured for auto mode, this timer value specifies how often to re-analyze the spectrum to select a low interference channel. Note: auto channel rescan will only occur when…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.2.5.46.1.1.1.7
wlBaseCfgMimoNEwc
Radio 802.11n Enhanced Wireless Consortium (EWC) mode: auto(1) disable(2)
columnWlMimoNEwcModes.1.3.6.1.4.1.5504.2.5.46.1.1.1.8
wlBaseCfgMimoNRate
The configured Multiple Input Multiple Output (MIMO) 802.11n rate. Enumeration of: auto(1), use54g(2), rate6Dot5(3), rate13(4)…
columnWlMimoNRates.1.3.6.1.4.1.5504.2.5.46.1.1.1.9