username

ZHNLANDEVICE · .1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.4

MIB view Table view

Object

column r/w OctetString

PPP requires that you have a user name and password to establish your
connection. This object is the login user name to be used for PPP 
authentication.

Context

MIB: ZHNLANDEVICE
OID: .1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.4
Type: column
Access: readwrite
Status: current
Parent: pppoeConfigEntry
Table: pppoeConfigTable
Siblings: 13

Syntax

OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
pppoeIfName The interface name for this LAN device.	column	OctetString	`.1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.1`
idleDisconnectTime The time in seconds that if the connection remains idle, the CPE automatically terminates the connection. A value of 0 (zero) indicates that the connection is not to be shutdown a…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.10`
holdOffTime Set time in seconds before retrying connection.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.11`
useStaticIpAddress If TRUE, PPPoE connection will use a static IP address.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.12`
staticIpAddress PPPoE static IP address.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.13`
enableDebug Enable PPPoE debug.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.14`
pid This object holds the process id (pid) of the pppd associated with this connection. A pid of 0 indicates that there is no pppd running.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.2`
connectionRequest This object is used to bring up or down a PPPoE connection. Enumeration of: None Down Up Connect Disconnect	column	PPPUserConnectionRequestValues	`.1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.3`
password PPP requires that you have a user name and password to establish your connection. This object is the login password to be used for PPP authentication. When read, this parameter r…	column	OctetString	`.1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.5`
authentication This object is the PPP authentication protocol to be used for PPP authentication. Enumeration of: AUTO_AUTH PAP CHAP MS-CHAP	column	PPPAuthenticationProtocolValues	`.1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.6`
serviceName This object is the PPP Service Name. It should be filled only if specified by the provider.	column	OctetString	`.1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.7`
encryptionProtocol This object describes the PPP encryption protocol. Enumeration of: None MPPE	column	PPPEncryptionProtocolValues	`.1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.8`
compressionProtocol This object describes the PPP compression protocol used between the WAN device and the ISP POP. Enumeration of: None VanJacobsen STAC-LZS	column	PPPCompressionProtocolValues	`.1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.9`