password
ZHNLANDEVICE ·
.1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.5
Object
column
r/w
OctetString
PPP requires that you have a user name and password to establish your connection. This object is the login password to be used for PPP authentication. When read, this parameter returns an empty string, regardless of the actual value.
Context
- MIB
- ZHNLANDEVICE
- OID
.1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- pppoeConfigEntry
- Table
- pppoeConfigTable
- Siblings
- 13
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pppoeIfName The interface name for this LAN device. | column | OctetString | .1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.1 |
| idleDisconnectTime The time in seconds that if the connection remains idle, the CPE
automatically terminates the connection. A value of 0 (zero) indicates
that the connection is not to be shutdown a… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.10 |
| holdOffTime Set time in seconds before retrying connection. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.11 |
| useStaticIpAddress If TRUE, PPPoE connection will use a static IP address. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.12 |
| staticIpAddress PPPoE static IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.13 |
| enableDebug Enable PPPoE debug. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.14 |
| pid This object holds the process id (pid) of the pppd associated with this
connection. A pid of 0 indicates that there is no pppd running. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.2 |
| connectionRequest This object is used to bring up or down a PPPoE connection. Enumeration of:
None
Down
Up
Connect
Disconnect | column | PPPUserConnectionRequestValues | .1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.3 |
| username PPP requires that you have a user name and password to establish your
connection. This object is the login user name to be used for PPP
authentication. | column | OctetString | .1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.4 |
| authentication This object is the PPP authentication protocol to be used for PPP
authentication. Enumeration of:
AUTO_AUTH
PAP
CHAP
MS-CHAP | column | PPPAuthenticationProtocolValues | .1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.6 |
| serviceName This object is the PPP Service Name. It should be filled only if
specified by the provider. | column | OctetString | .1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.7 |
| encryptionProtocol This object describes the PPP encryption protocol. Enumeration of:
None
MPPE | column | PPPEncryptionProtocolValues | .1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.8 |
| compressionProtocol This object describes the PPP compression protocol used between the WAN
device and the ISP POP. Enumeration of:
None
VanJacobsen
STAC-LZS | column | PPPCompressionProtocolValues | .1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.9 |