xupsRecepEntry

XUPS-MIB · .1.3.6.1.4.1.534.1.12.2.1

MIB view Table view

Object

row

A receptacle table entry containing the status and
control values for one receptacle.

Context

MIB: XUPS-MIB
OID: .1.3.6.1.4.1.534.1.12.2.1
Type: row
Status: current
Parent: xupsRecepTable
Table: xupsRecepTable
Children: 10

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects

Object	Type	Syntax	OID
xupsRecepIndex The number of the Receptacle. Serves as index for Receptacle table.	column	Integer32	`.1.3.6.1.4.1.534.1.12.2.1.1`
xupsRecepCumulativePowerUsageTimer Time in seconds since the cumulative power usage was last reset.	column	Seconds SNMPv2-SMICounter32	`.1.3.6.1.4.1.534.1.12.2.1.10`
xupsRecepStatus The Recep Status 1=On/Close, 2=Off/Open, 3=On w/Pending Off, 4=Off w/Pending ON, 5=Unknown, 6=Reserved for future, 7=Failed in Closed position, 8=Failed in Open position.	column	Enumeration	`.1.3.6.1.4.1.534.1.12.2.1.2`
xupsRecepOffDelaySecs The Delay until the Receptacle is turned Off. Setting this value to other than -1 will cause the UPS output to turn off after the number of seconds (0 is immediately). Settin…	column	seconds Integer32	`.1.3.6.1.4.1.534.1.12.2.1.3`
xupsRecepOnDelaySecs The Delay until the Receptacle is turned On. Setting this value to other than -1 will cause the UPS output to turn on after the number of seconds (0 is immediately). Setting …	column	seconds Integer32	`.1.3.6.1.4.1.534.1.12.2.1.4`
xupsRecepAutoOffDelay The delay after going On Battery until the Receptacle is automatically turned Off. A value of -1 means that this Output should never be turned Off automatically, but must be tu…	column	seconds Integer32	`.1.3.6.1.4.1.534.1.12.2.1.5`
xupsRecepAutoOnDelay Seconds delay after the Outlet is signaled to turn On before the Output is Automatically turned ON. A value of -1 means that this Output should never be turned On automatically, b…	column	seconds Integer32	`.1.3.6.1.4.1.534.1.12.2.1.6`
xupsRecepShedSecsWithRestart Setting this value will cause the UPS output to turn off after the set number of seconds, then restart (after a UPS-defined 'down time') when the utility is again available. Un…	column	seconds Integer32	`.1.3.6.1.4.1.534.1.12.2.1.7`
xupsRecepHourlyPowerUsage Units are Watt-hours.This is the energy consumed during the last hour.	column	Wh Integer32	`.1.3.6.1.4.1.534.1.12.2.1.8`
xupsRecepCumulativePowerUsage Units are Watt-hours.This is the energy consumed since the last reset. This object is writable so that it can be reset to 0. When it is written to 0, the xupsRecepCumulativePowerU…	column	Wh Integer32	`.1.3.6.1.4.1.534.1.12.2.1.9`

Indexes