xcmPrtDrvrHwdOptHighCapacityFeeder

XEROX-PRINTER-EXT-MIB · .1.3.6.1.4.1.253.8.55.6.7
MIB view Table view

Object

scalar XEROX-PRINTER-EXT-TCXcmPrtHighCapacityFeederType 
Object that indicates the type of High Capacity Feeder that
is installed within the print device.

Context

MIB
XEROX-PRINTER-EXT-MIB
OID
.1.3.6.1.4.1.253.8.55.6.7
Type
scalar
Access
readonly
Status
current
Parent
xcmPrtDriverOptions
Siblings
28

Syntax

XEROX-PRINTER-EXT-TCXcmPrtHighCapacityFeederType
Source
XEROX-PRINTER-EXT-TCXcmPrtHighCapacityFeederType
Base type
Enumeration

Values & Constraints

Type Values
1other
2notInstalled
3hcf
4hcfOversized
5hcfOversized2Trays

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
xcmPrtDrvrHwdOptStapler
Object that indicates if a Stapler Unit is installed within the print device.
scalarPrinter-MIBPresentOnOff.1.3.6.1.4.1.253.8.55.6.1
xcmPrtDrvrHwdOptHolePunchUnit
Object used to indicate the type of Hole Punch Unit that is installed within the print device.
scalarXEROX-PRINTER-EXT-TCXcmPrtHolePunchUnitType.1.3.6.1.4.1.253.8.55.6.10
xcmPrtDriverInputPaperTrays
Object used to indicate the type of Paper Trays that are installed within the print device. The contents of this object shall expose a string of valid Paper Tray names which are s…
scalarOctetString.1.3.6.1.4.1.253.8.55.6.11
xcmPrtDrvrHwdOptInserterUnit
Object that indicates if an Inserter Unit is installed within the print device.
scalarPrinter-MIBPresentOnOff.1.3.6.1.4.1.253.8.55.6.12
xcmPrtDrvrHwdOptJobAccountingFdi
Object that indicates if a Job Accounting FDI Unit is installedthe print device.
scalarPrinter-MIBPresentOnOff.1.3.6.1.4.1.253.8.55.6.13
xcmPrtDrvrHwdOptFaxOut
Object that indicates if a Fax Out Unit is installed within the print device.
scalarXEROX-PRINTER-EXT-TCXcmPrtFaxOutType.1.3.6.1.4.1.253.8.55.6.14
xcmPrtDrvrHwdOptMemoryInMBs
Object that indicates the size of physical memory in units of Megabytes installed within the print device. A value of zero indicates that no memory is installed.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.253.8.55.6.15
xcmPrtDrvrHwdOptOutputBinSide
Object that indicates if a Side Output Bin is installed within the print device.
scalarPrinter-MIBPresentOnOff.1.3.6.1.4.1.253.8.55.6.16
xcmPrtDrvrHwdOptOutputBinCenter
Object that indicates if a Center Output Bin is installed within the print device.
scalarPrinter-MIBPresentOnOff.1.3.6.1.4.1.253.8.55.6.17
xcmPrtDrvrHwdOptPhaserModule
Object that indentifies the configuration of the Phaser print device.
scalarXEROX-PRINTER-EXT-TCXcmPrtPhaserModuleType.1.3.6.1.4.1.253.8.55.6.18
xcmPrtDrvrHwdOptPrintEngine
Object that indicates if the print device contains a single print engine or has two print engines.
scalarXEROX-PRINTER-EXT-TCXcmPrtPrintEngineType.1.3.6.1.4.1.253.8.55.6.19
xcmPrtDrvrHwdOptDuplexUnit
Object that indicates if a Duplex Unit is installed within the print device.
scalarPrinter-MIBPresentOnOff.1.3.6.1.4.1.253.8.55.6.2
xcmPrtDrvrHwdOptSquareFoldTrimmer
Object that indicates if a Square Fold Trimmer Unit is installed within the print device.
scalarPrinter-MIBPresentOnOff.1.3.6.1.4.1.253.8.55.6.20
xcmPrtDrvrHwdOptTriFold
Object that indicates if a Tri-Fold Unit is installed within the print device.
scalarPrinter-MIBPresentOnOff.1.3.6.1.4.1.253.8.55.6.21
xcmPrtDrvrHwdOptPhaserBookletMaker
Object that indicates if a Booklet Maker Module is installed within the Phaser print device.
scalarPrinter-MIBPresentOnOff.1.3.6.1.4.1.253.8.55.6.3
xcmPrtDrvrHwdOptEnvelopeTray
Object that indicates if an Envelope Tray is installed within the print device.
scalarPrinter-MIBPresentOnOff.1.3.6.1.4.1.253.8.55.6.4
xcmPrtDrvrHwdOptCoilPunchUnit
Object that indicates if a Coil Punch Unit is installed within the print device.
scalarPrinter-MIBPresentOnOff.1.3.6.1.4.1.253.8.55.6.5
xcmPrtDrvrFntCollation
Object that indicates if the Collation function is supported by the print device.
scalarPrinter-MIBPresentOnOff.1.3.6.1.4.1.253.8.55.6.50
xcmPrtDrvrFntAsciiJobTicket
Object that indicates if an ACSII Job Ticket function is supported by the print device.
scalarXEROX-PRINTER-EXT-TCXcmPrtAsciiJobTicketType.1.3.6.1.4.1.253.8.55.6.51
xcmPrtDrvrFntAuthenticationMode
Object that indicates the type of Authentication Mode function that is supported by the print device.
scalarXEROX-PRINTER-EXT-TCXcmPrtAuthenticationModeType.1.3.6.1.4.1.253.8.55.6.52
xcmPrtDrvrFntHoldForAuthenMode
Object that indicates the type of Hold for Authentication Mode function that is supported by the print device.
scalarXEROX-PRINTER-EXT-TCXcmPrtHoldForAuthenModeType.1.3.6.1.4.1.253.8.55.6.53
xcmPrtDrvrFntEnhancedImageQualityMode
Object that indicates if the Enhanced Image Quality function is supported by the print device.
scalarPrinter-MIBPresentOnOff.1.3.6.1.4.1.253.8.55.6.54
xcmPrtDrvrFntProductivityPack
Object that indicates if the Productivity Pack function is supported by the print device.
scalarPrinter-MIBPresentOnOff.1.3.6.1.4.1.253.8.55.6.55
xcmPrtDrvrFntJobStorage
Object that indicates if the Job Storage software function is supported by the print device.
scalarPrinter-MIBPresentOnOff.1.3.6.1.4.1.253.8.55.6.56
xcmPrtDrvrFntJobAccountingSystem
Object that indicates the type of Job Accounting System that is supported by the print device.
scalarXEROX-PRINTER-EXT-TCXcmPrtAccountingSystemType.1.3.6.1.4.1.253.8.55.6.57
xcmPrtDrvrHwdOptFinisherDFA
Object that indicates the type of Finisher DFA that is installed within the print device.
scalarXEROX-PRINTER-EXT-TCXcmPrtFinisherDFAType.1.3.6.1.4.1.253.8.55.6.6
xcmPrtDriverOutputDeliveryUnit
Object used to indicate the type of Output Delivery Units that are installed within the print device. The contents of this object shall expose a string of valid Output Delivery Un…
scalarOctetString.1.3.6.1.4.1.253.8.55.6.8
xcmPrtDrvrHwdOptHardDrive
Object that indicates if a Hard Drive is installed within the print device.
scalarPrinter-MIBPresentOnOff.1.3.6.1.4.1.253.8.55.6.9