xcmPrtDriverOutputDeliveryUnit
XEROX-PRINTER-EXT-MIB ·
.1.3.6.1.4.1.253.8.55.6.8
Object
scalar
OctetString
Object used to indicate the type of Output Delivery Units that
are installed within the print device. The contents of this
object shall expose a string of valid Output Delivery Unit name
which are seperated by a comma. Valid Output Delivery Unit type
include:
'notInstalled'
'installed'
'phStacker'
'phAdvanced'
'phProfessional'
'offsetCatchTray'
'simpleCatchTray'
'outputBin500Support'
'octMailbox'
'sctMailbox'
'octMailboxStapler'
'sctMailboxStapler'
'basicOfficeFinisher'
'officeFinisher'
'advancedOfficeFinisher'
'standardFinisher'
'professionalFinisher'
'dClassFinisher'
'dBookletMaker'
'dBookletMakerFold'
'd3ClassFinisher'
'd3ClassFinisherHcs'
'sbm'
'standardMff'
'professionalMff'
'bfm'
'ftm'
'bfmBfm'
'bfmBfmFtm'
'hcs'
'ehcs'
'hvf'
'hvfBm'
'bTypeFinisher'
'cTypeFinisher'
'cTypeFinisherBookletMaker'
'phProfessional2'
'dfaCompliant'
'hcss'
'dClassFinisherAdvanced'
'dClassFinisherProfessional'
'dClassFinisherProduction'
'cClassFinisherAdvanced'
'cClassFinisherProfessional'
'sbmFolder'
'standardFinisherMain'
'standardFinisherSb'
'dfaCompliantMain'
'dfaCompliantSb'
'dfaCompliantCustom'
'ehcs80'
'ehcss80'
'hcsDfa'
'hcsHcs'
'hcsHcsDfa'
'D3ClassFinisherHcsHcs'
'css'
'professionalPlusMff'
'bfmFtm'
'aTypeFinisher'
'typeSb'
'typeSbBookletMaker'
'professionalMffMohican'
'ftms'
'bfmFtms'
'ftmsFtms'
'bfmFtmsFtms'
'bfmBfmFtms'
'dFold'
'mainTray'
An example: dClassFinisherProduction,dBookletMaker
Context
- MIB
- XEROX-PRINTER-EXT-MIB
- OID
.1.3.6.1.4.1.253.8.55.6.8- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- xcmPrtDriverOptions
- Siblings
- 28
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| xcmPrtDrvrHwdOptStapler Object that indicates if a Stapler Unit is installed within
the print device. | scalar | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.6.1 |
| xcmPrtDrvrHwdOptHolePunchUnit Object used to indicate the type of Hole Punch Unit that is
installed within the print device. | scalar | XEROX-PRINTER-EXT-TCXcmPrtHolePunchUnitType | .1.3.6.1.4.1.253.8.55.6.10 |
| xcmPrtDriverInputPaperTrays Object used to indicate the type of Paper Trays that are
installed within the print device. The contents of this
object shall expose a string of valid Paper Tray names which
are s… | scalar | OctetString | .1.3.6.1.4.1.253.8.55.6.11 |
| xcmPrtDrvrHwdOptInserterUnit Object that indicates if an Inserter Unit is installed
within the print device. | scalar | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.6.12 |
| xcmPrtDrvrHwdOptJobAccountingFdi Object that indicates if a Job Accounting FDI Unit is
installedthe print device. | scalar | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.6.13 |
| xcmPrtDrvrHwdOptFaxOut Object that indicates if a Fax Out Unit is installed within
the print device. | scalar | XEROX-PRINTER-EXT-TCXcmPrtFaxOutType | .1.3.6.1.4.1.253.8.55.6.14 |
| xcmPrtDrvrHwdOptMemoryInMBs Object that indicates the size of physical memory in units
of Megabytes installed within the print device. A value of
zero indicates that no memory is installed. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.253.8.55.6.15 |
| xcmPrtDrvrHwdOptOutputBinSide Object that indicates if a Side Output Bin is installed
within the print device. | scalar | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.6.16 |
| xcmPrtDrvrHwdOptOutputBinCenter Object that indicates if a Center Output Bin is installed
within the print device. | scalar | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.6.17 |
| xcmPrtDrvrHwdOptPhaserModule Object that indentifies the configuration of the Phaser
print device. | scalar | XEROX-PRINTER-EXT-TCXcmPrtPhaserModuleType | .1.3.6.1.4.1.253.8.55.6.18 |
| xcmPrtDrvrHwdOptPrintEngine Object that indicates if the print device contains a single
print engine or has two print engines. | scalar | XEROX-PRINTER-EXT-TCXcmPrtPrintEngineType | .1.3.6.1.4.1.253.8.55.6.19 |
| xcmPrtDrvrHwdOptDuplexUnit Object that indicates if a Duplex Unit is installed within
the print device. | scalar | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.6.2 |
| xcmPrtDrvrHwdOptSquareFoldTrimmer Object that indicates if a Square Fold Trimmer Unit is
installed within the print device. | scalar | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.6.20 |
| xcmPrtDrvrHwdOptTriFold Object that indicates if a Tri-Fold Unit is installed within
the print device. | scalar | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.6.21 |
| xcmPrtDrvrHwdOptPhaserBookletMaker Object that indicates if a Booklet Maker Module is installed
within the Phaser print device. | scalar | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.6.3 |
| xcmPrtDrvrHwdOptEnvelopeTray Object that indicates if an Envelope Tray is installed within
the print device. | scalar | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.6.4 |
| xcmPrtDrvrHwdOptCoilPunchUnit Object that indicates if a Coil Punch Unit is installed
within the print device. | scalar | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.6.5 |
| xcmPrtDrvrFntCollation Object that indicates if the Collation function is supported
by the print device. | scalar | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.6.50 |
| xcmPrtDrvrFntAsciiJobTicket Object that indicates if an ACSII Job Ticket function is
supported by the print device. | scalar | XEROX-PRINTER-EXT-TCXcmPrtAsciiJobTicketType | .1.3.6.1.4.1.253.8.55.6.51 |
| xcmPrtDrvrFntAuthenticationMode Object that indicates the type of Authentication Mode
function that is supported by the print device. | scalar | XEROX-PRINTER-EXT-TCXcmPrtAuthenticationModeType | .1.3.6.1.4.1.253.8.55.6.52 |
| xcmPrtDrvrFntHoldForAuthenMode Object that indicates the type of Hold for Authentication
Mode function that is supported by the print device. | scalar | XEROX-PRINTER-EXT-TCXcmPrtHoldForAuthenModeType | .1.3.6.1.4.1.253.8.55.6.53 |
| xcmPrtDrvrFntEnhancedImageQualityMode Object that indicates if the Enhanced Image Quality function
is supported by the print device. | scalar | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.6.54 |
| xcmPrtDrvrFntProductivityPack Object that indicates if the Productivity Pack function
is supported by the print device. | scalar | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.6.55 |
| xcmPrtDrvrFntJobStorage Object that indicates if the Job Storage software function
is supported by the print device. | scalar | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.6.56 |
| xcmPrtDrvrFntJobAccountingSystem Object that indicates the type of Job Accounting System that
is supported by the print device. | scalar | XEROX-PRINTER-EXT-TCXcmPrtAccountingSystemType | .1.3.6.1.4.1.253.8.55.6.57 |
| xcmPrtDrvrHwdOptFinisherDFA Object that indicates the type of Finisher DFA that is
installed within the print device. | scalar | XEROX-PRINTER-EXT-TCXcmPrtFinisherDFAType | .1.3.6.1.4.1.253.8.55.6.6 |
| xcmPrtDrvrHwdOptHighCapacityFeeder Object that indicates the type of High Capacity Feeder that
is installed within the print device. | scalar | XEROX-PRINTER-EXT-TCXcmPrtHighCapacityFeederType | .1.3.6.1.4.1.253.8.55.6.7 |
| xcmPrtDrvrHwdOptHardDrive Object that indicates if a Hard Drive is installed within
the print device. | scalar | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.6.9 |