wwpLeosNtpClientMinPollFreq
WWP-LEOS-NTP-CLIENT-MIB ·
.1.3.6.1.4.1.6141.2.60.18.1.1.11
Object
scalar
r/w
Integer32
The polling freq at which NTP server will be polled if the NTP client is configured to be in polling mode and is not currently synchronized to an NTP server. The value of this object should be multiple of 16. The change in the ntp mode will only be affective when ntp client is enabled and should not be set at the same time PollFreq is set.
Context
- MIB
- WWP-LEOS-NTP-CLIENT-MIB
- OID
.1.3.6.1.4.1.6141.2.60.18.1.1.11- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- wwpLeosNtpClient
- Siblings
- 17
Syntax
Integer32
Values & Constraints
Object Constraints
range: 16-4096
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wwpLeosNtpClientState Setting this object to 'enable' will enable the
NTP client on Ciena devices. | scalar | Enumeration | .1.3.6.1.4.1.6141.2.60.18.1.1.1 |
| wwpLeosNtpClientSlowOffset The Slowest Offset seen in micro-seconds of the local clock. This value
is only valid when NTP is enabled and has a valid peer. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.18.1.1.10 |
| wwpLeosNtpClientMaxPollFreq The polling freq at which NTP server will be polled
if the NTP client is configured to be in polling mode
and is currently synchronized to an NTP server.
The value of this object … | scalar | Integer32 | .1.3.6.1.4.1.6141.2.60.18.1.1.12 |
| wwpLeosNtpClientOffset deprecated When NTP is synchronized, this contains the difference between
the reference clock and the system clock micro-seconds. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.18.1.1.13 |
| wwpLeosNtpClientDelay When NTP is synchronized, this indicates the round trip time
in micro-seconds taken by the reply packet to return in response,
to a query sent by the server. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.18.1.1.14 |
| wwpLeosNtpClientJitter When NTP is synchronized, it indicates the magnitude of
jitter between several time queries in micro-seconds. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.18.1.1.15 |
| wwpLeosNtpClientNtpOffset When NTP is synchronized, this contains the difference between
the reference clock and the system clock micro-seconds. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.18.1.1.16 |
| wwpLeosNtpClientNtpFastStartMode Setting this object to 'on' will cause the
NTP client to set it's time to the first reply
received from a synchronized NTP server, the
first time this occurs after the NTP client
… | scalar | Enumeration | .1.3.6.1.4.1.6141.2.60.18.1.1.17 |
| wwpLeosNtpMulticastTable Table of NTP Multicast Addresses indexed by wwpLeosNtpMulticastIndex.
To create an entry in the table, use SNMP multiple set operation
and following objects must be set:
wwpLeosNt… | table | - | .1.3.6.1.4.1.6141.2.60.18.1.1.18 |
| wwpLeosNtpClientSyncChangeNotifAdminState Set to on to turn on sync change notifications. | scalar | Enumeration | .1.3.6.1.4.1.6141.2.60.18.1.1.19 |
| wwpLeosNtpClientMode Setting this object to 'broadcast' will cause the
client not to poll the NTP server at all. Instead, it
will wait for configured NTP servers to broadcast
their current time. Whe… | scalar | Enumeration | .1.3.6.1.4.1.6141.2.60.18.1.1.2 |
| wwpLeosNtpClientPollFreq The polling frequency at which NTP server will be polled
if the NTP client is configured to be in polling mode.
The value of this object should be multiple of 16.
The change in th… | scalar | Integer32 | .1.3.6.1.4.1.6141.2.60.18.1.1.3 |
| wwpLeosNtpClientTable Table of NTP server information indexed by wwpLeosNtpServerIndex.
To create an entry in the table, use SNMP multiple set operation
and following objects must be set:
wwpLeosNtpSer… | table | - | .1.3.6.1.4.1.6141.2.60.18.1.1.4 |
| wwpLeosNtpAuthTable The (conceptual) table listing the key-id and MD5 key. | table | - | .1.3.6.1.4.1.6141.2.60.18.1.1.5 |
| wwpLeosNtpClientMD5State Set to true to use MD5 authentication for NTP | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6141.2.60.18.1.1.6 |
| wwpLeosNtpClientDrift The Drift in micro-seconds of the local clock. This value
is only valid when NTP is enabled and has a valid peer. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.18.1.1.7 |
| wwpLeosNtpClientFastOffset The Fastest Offset seen in micro-seconds of the local clock. This value
is only valid when NTP is enabled and has a valid peer. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.18.1.1.9 |