cfgWlanHoProfile
WESTERMO-SW6-MIB ·
.1.3.6.1.4.1.16177.1.400.1.1.3.3.1.3
Object
column
r/w
Enumeration
Handoff profile.
* **t2gv1(1):** Train to Ground v1
* **t2gv2(2):** Train to Ground v2
* **t2gv2fg(3):** Train to Ground v2 fg scan
* **t2gv3(4):** Train to Ground v3 (RSSI high/low, Distance near/far)
Applies to STA. 802.11n products only.
Context
- MIB
- WESTERMO-SW6-MIB
- OID
.1.3.6.1.4.1.16177.1.400.1.1.3.3.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cfgWlanHandoffTableEntry
- Table
- cfgWlanHandoffTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | t2gv1 |
2 | t2gv2 |
3 | t2gv2fg |
4 | t2gv3 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cfgWlanHoIndex Entry index of table.
Applies to STA. 802.11n products only. | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.3.3.1.1 |
| cfgWlanHoFilterLongX IIR Filter Parameter x for long RSSI filter.
Applies to STA. 802.11n products only. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.16177.1.400.1.1.3.3.1.10 |
| cfgWlanHoFilterLongY IIR Filter Parameter y for long RSSI filter.
Applies to STA. 802.11n products only. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.16177.1.400.1.1.3.3.1.11 |
| cfgWlanHoScanRateLimitTime Time in milliseconds (4ms steps) in which a number of attempts to connect
to an AP can be tried.
Applies to STA. 802.11n products only. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.16177.1.400.1.1.3.3.1.12 |
| cfgWlanHoScanRateLimitTries Number of attempts to connect to an AP before the AP is blacklisted
and ignored. The AP is removed from the blacklist after
`cfgWlanHoScanRateLimitTime` since the first attempt.
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.16177.1.400.1.1.3.3.1.13 |
| cfgWlanHoPassiveChanTime Time in milliseconds (4ms steps) we stay on a channel during passive
scanning and wait for beacons.
Applies to STA. 802.11n products only. | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.3.3.1.16 |
| cfgWlanHoLevelLow Scanning level low in RSSI.
When the RSSI level to the current connected AP is below this value,
perform a handoff to the next AP.
This value is only… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.16177.1.400.1.1.3.3.1.18 |
| cfgWlanHoLevelHigh Scanning level high in RSSI.
When the RSSI level to the current connected AP is above this value,
perform a handoff to the next AP.
This value is onl… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.16177.1.400.1.1.3.3.1.19 |
| cfgWlanHoIfaceName Name of the virtual wireless interface.
Applies to STA. 802.11n products only. | column | OctetString | .1.3.6.1.4.1.16177.1.400.1.1.3.3.1.2 |
| cfgWlanHoDistanceNear Distance level near.
When the measured distance to the current connected AP is below
this value in meters, perform a handoff to the next AP.
This val… | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.3.3.1.20 |
| cfgWlanHoDistanceFar Distance level far.
When the measured distance to the current connected AP is above
this value in meters, perform a handoff to the next AP.
This valu… | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.3.3.1.21 |
| cfgWlanHoDistanceMeasurementPeriod Distance ranging measurement period in milliseconds.
Setting zero disables distance handoff. This value is only active
when `cfgWlanHoProfile` is set to T2Gv3.
… | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.3.3.1.22 |
| cfgWlanHoDistanceFilterX IIR Filter Parameter x for distance measurement.
This value is only active when `cfgWlanHoProfile` is set to T2Gv3.
Applies to STA. 802.11n products … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.16177.1.400.1.1.3.3.1.23 |
| cfgWlanHoDistanceFilterY IIR Filter Parameter y for distance measurements.
This value is only active when `cfgWlanHoProfile` is set to T2Gv3.
Applies to STA. 802.11n products… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.16177.1.400.1.1.3.3.1.24 |
| cfgWlanHoScanningLevel Scanning level in RSSI.
When the RSSI level of the currently connected access point drops
below the value configured in this parameter, the STA will scan
for better… | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.3.3.1.5 |
| cfgWlanHoBeacons Number of beacons which have to be received from an AP before a
decision about handoff is allowed. Essentially forces the STA to
stay on a given AP for <cfgWlanHoBeacons * cfgWlan… | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.3.3.1.6 |
| cfgWlanHoRecovery Recovery time in milliseconds after a successful handoff.
During this time no further handoff will be executed.
Applies to STA. 802.11n products only. | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.3.3.1.7 |
| cfgWlanHoFilterMode RSSI filter mode.
* **short(0):** high responsive static IIR RSSI filter.
* **long(1):** configurable IIR RSSI filter.
Applies to STA. 802.11n produc… | column | Enumeration | .1.3.6.1.4.1.16177.1.400.1.1.3.3.1.9 |