cfgWlan802dot1xInterimAccountingInterval
WESTERMO-SW6-MIB ·
.1.3.6.1.4.1.16177.1.400.1.1.3.10.1.7
Object
column
r/w
Integer32
Interim accounting update interval in seconds.
If this is set (larger than 0) and acct_server is configured,
hostapd will send interim accounting updates every N seconds. Set
to 0 to disable.
**Note:** If set, this overrides possible Acct-Interim-Interval
attribute in Access-Accept message. Thus, this value should not
be configured in hostapd.conf if RADIUS server is used to control
the interim interval. This value should not be less 600
(10 minutes) and must not be less than 60 (1 minute).
Applies to AP.
Context
- MIB
- WESTERMO-SW6-MIB
- OID
.1.3.6.1.4.1.16177.1.400.1.1.3.10.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cfgWlan802dot1xTableEntry
- Table
- cfgWlan802dot1xTable
- Siblings
- 11
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-86400
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cfgWlan802dot1xIndex Entry index of table | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.3.10.1.1 |
| cfgWlan802dot1xIdentity The identity string for EAP.
Applies to STA. | column | OctetString | .1.3.6.1.4.1.16177.1.400.1.1.3.10.1.10 |
| cfgWlan802dot1xClientKeyPassword The password to unlock the private key.
This is only required if the key is encrypted.
Applies to STA. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.16177.1.400.1.1.3.10.1.17 |
| cfgWlan802dot1xTlsControlParams Bitfield to control TLS behaviour.
* **0x1** ignore certificate validity time
* **0x2** ignore ca certificate
Applies to STA. | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.3.10.1.18 |
| cfgWlan802dot1xName Name of the virtual wireless interface.
Applies to AP and STA. | column | OctetString | .1.3.6.1.4.1.16177.1.400.1.1.3.10.1.2 |
| cfgWlan802dot1xOwnIpAddr The own IP address of the authenticator.
This field is used as NAS-IP-Address RADIUS attribute.
Set this to the IP address with which the authenticator will
communicate with the R… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.16177.1.400.1.1.3.10.1.3 |
| cfgWlan802dot1xAuthServerParameter Reference ID to the radius auth server table. Uses all parameters
in the cfgWlan802dot1xAuthServerTable which have as
cfgWlan802dot1xAuthSrvId the value set here.
A… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.16177.1.400.1.1.3.10.1.4 |
| cfgWlan802dot1xAcctServerParameter Reference ID to the radius acct server table. Uses all parameters
in the cfgWlan802dot1xAcctServerTable which have as
cfgWlan802dot1xAcctSrvId the value set here.
A… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.16177.1.400.1.1.3.10.1.5 |
| cfgWlan802dot1xRetryPrimaryInterval Retry interval for trying to return to the primary RADIUS server
(in seconds). RADIUS client code will automatically try to use the
next server when the current server is not repl… | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.3.10.1.6 |
| cfgWlan802dot1xNasId Optional NAS identifier string for RADIUS messages. When used,
this should be unique to the NAS within the scope of the RADIUS
server. For example, a fully qualified domain name c… | column | OctetString | .1.3.6.1.4.1.16177.1.400.1.1.3.10.1.8 |
| cfgWlan802dot1xEapType Specify the EAP type.
Applies to STA. | column | Enumeration | .1.3.6.1.4.1.16177.1.400.1.1.3.10.1.9 |