ipAddr
WAC510 ·
.1.3.6.1.4.1.4526.100.7.14.1.7
Object
This attribute indicates the static management IP address of the AP.
Context
- MIB
- WAC510
- OID
.1.3.6.1.4.1.4526.100.7.14.1.7- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- basicSettings
- Siblings
- 22
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| apName This attribute indicates the name of AP. The name is also the NETBIOS name of the AP. | scalar | OctetString | .1.3.6.1.4.1.4526.100.7.14.1.1 |
| priDnsAddr This attribute indicates the address that will be used as
the first entry in the DNS server list if dhcpClientStatus is
disabled.
***The value can only be set to an IP address i… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4526.100.7.14.1.10 |
| sndDnsAddr This attribute indicates the address that will be used as the
second entry in the DNS server list if dhcpClientStatus is
disabled.
***The value can only be set to an IP address… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4526.100.7.14.1.11 |
| spanTreeStatus This attribute indicates the status of Spanning Tree Protocol in the AP.
The default value is disable(0). | scalar | Enumeration | .1.3.6.1.4.1.4526.100.7.14.1.12 |
| managementVlanID This attribute indicates the Management VLAN ID.
Default value of management VLAN ID is 1. | scalar | Integer32 | .1.3.6.1.4.1.4526.100.7.14.1.13 |
| networkIntegrityCheck This attribute indicates the status of internet connection check .
AP automatically validates whether the internet connection is active
before allowing wireless associations by p… | scalar | Enumeration | .1.3.6.1.4.1.4526.100.7.14.1.14 |
| untaggedVlanStatus This attribute indicates the status of untagged VLAN.
The untagged VLAN is enabled by default. | scalar | Enumeration | .1.3.6.1.4.1.4526.100.7.14.1.15 |
| untaggedVlanID This attribute indicates the Untagged VLAN ID.
Default value of untagged VLAN ID is 1. | scalar | Integer32 | .1.3.6.1.4.1.4526.100.7.14.1.16 |
| sysHardwareVersion This attribute indicates the system hardware version. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4526.100.7.14.1.17 |
| sysSerialNumber This attribute indicates the system serial number. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4526.100.7.14.1.18 |
| lldpStatus This attribute indicates the LLDP status.
LLDP is enabled by default. | scalar | Enumeration | .1.3.6.1.4.1.4526.100.7.14.1.19 |
| sysMacAddress This attribute indicates the MAC Address of the ethernet interface. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4526.100.7.14.1.2 |
| deviceMode This attribute indicates the operating mode of a radio.
The default value is ap(0). | scalar | Enumeration | .1.3.6.1.4.1.4526.100.7.14.1.21 |
| wirelessScheduleStatus This attribute shall indicate the status of Wireless Scheduling.
The default value is disable(0). | scalar | Enumeration | .1.3.6.1.4.1.4526.100.7.14.1.22 |
| upnpStatus This attribute indicates the status of UPnP.
The default value is enable(1). | scalar | Enumeration | .1.3.6.1.4.1.4526.100.7.14.1.25 |
| interVlanRouting This attribute indicates the status of inter VLAN Routing.
The inter VLAN Routing is disabled by default. | scalar | Enumeration | .1.3.6.1.4.1.4526.100.7.14.1.26 |
| sysVersion This attribute indicates the system firmware version. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4526.100.7.14.1.3 |
| sysCountryRegion This attribute indicates the region of operation
for which the wireless interface is intended. | scalar | Enumeration | .1.3.6.1.4.1.4526.100.7.14.1.4 |
| adminPasswd This attribute indicates the administrator password.
The AP can be managed from utilities such as ssh,
HTTP/HTTPS browser, SNMP management tool and so on. | scalar | OctetString | .1.3.6.1.4.1.4526.100.7.14.1.5 |
| dhcpClientStatus This attribute indicates the DHCP client status.
DHCP client is disabled by default. | scalar | Enumeration | .1.3.6.1.4.1.4526.100.7.14.1.6 |
| netmaskAddr This attribute indicates the static netmask of the
management interface. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4526.100.7.14.1.8 |
| gatewayAddr This attribute indicates the static gateway IP address
for the management interface. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4526.100.7.14.1.9 |