deviceMode

WAC510 · .1.3.6.1.4.1.4526.100.7.14.1.21
MIB view Table view

Object

scalar r/w Enumeration 
This attribute indicates the operating mode of a radio.
The default value is ap(0).

Context

MIB
WAC510
OID
.1.3.6.1.4.1.4526.100.7.14.1.21
Type
scalar
Access
readwrite
Status
current
Parent
basicSettings
Siblings
22

Syntax

Enumeration

Values & Constraints

Enumerated Values
0ap
1router

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
apName
This attribute indicates the name of AP. The name is also the NETBIOS name of the AP.
scalarOctetString.1.3.6.1.4.1.4526.100.7.14.1.1
priDnsAddr
This attribute indicates the address that will be used as the first entry in the DNS server list if dhcpClientStatus is disabled. ***The value can only be set to an IP address i…
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.4526.100.7.14.1.10
sndDnsAddr
This attribute indicates the address that will be used as the second entry in the DNS server list if dhcpClientStatus is disabled. ***The value can only be set to an IP address…
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.4526.100.7.14.1.11
spanTreeStatus
This attribute indicates the status of Spanning Tree Protocol in the AP. The default value is disable(0).
scalarEnumeration.1.3.6.1.4.1.4526.100.7.14.1.12
managementVlanID
This attribute indicates the Management VLAN ID. Default value of management VLAN ID is 1.
scalarInteger32.1.3.6.1.4.1.4526.100.7.14.1.13
networkIntegrityCheck
This attribute indicates the status of internet connection check . AP automatically validates whether the internet connection is active before allowing wireless associations by p…
scalarEnumeration.1.3.6.1.4.1.4526.100.7.14.1.14
untaggedVlanStatus
This attribute indicates the status of untagged VLAN. The untagged VLAN is enabled by default.
scalarEnumeration.1.3.6.1.4.1.4526.100.7.14.1.15
untaggedVlanID
This attribute indicates the Untagged VLAN ID. Default value of untagged VLAN ID is 1.
scalarInteger32.1.3.6.1.4.1.4526.100.7.14.1.16
sysHardwareVersion
This attribute indicates the system hardware version.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4526.100.7.14.1.17
sysSerialNumber
This attribute indicates the system serial number.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4526.100.7.14.1.18
lldpStatus
This attribute indicates the LLDP status. LLDP is enabled by default.
scalarEnumeration.1.3.6.1.4.1.4526.100.7.14.1.19
sysMacAddress
This attribute indicates the MAC Address of the ethernet interface.
scalarSNMPv2-TCMacAddress.1.3.6.1.4.1.4526.100.7.14.1.2
wirelessScheduleStatus
This attribute shall indicate the status of Wireless Scheduling. The default value is disable(0).
scalarEnumeration.1.3.6.1.4.1.4526.100.7.14.1.22
upnpStatus
This attribute indicates the status of UPnP. The default value is enable(1).
scalarEnumeration.1.3.6.1.4.1.4526.100.7.14.1.25
interVlanRouting
This attribute indicates the status of inter VLAN Routing. The inter VLAN Routing is disabled by default.
scalarEnumeration.1.3.6.1.4.1.4526.100.7.14.1.26
sysVersion
This attribute indicates the system firmware version.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4526.100.7.14.1.3
sysCountryRegion
This attribute indicates the region of operation for which the wireless interface is intended.
scalarEnumeration.1.3.6.1.4.1.4526.100.7.14.1.4
adminPasswd
This attribute indicates the administrator password. The AP can be managed from utilities such as ssh, HTTP/HTTPS browser, SNMP management tool and so on.
scalarOctetString.1.3.6.1.4.1.4526.100.7.14.1.5
dhcpClientStatus
This attribute indicates the DHCP client status. DHCP client is disabled by default.
scalarEnumeration.1.3.6.1.4.1.4526.100.7.14.1.6
ipAddr
This attribute indicates the static management IP address of the AP.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.4526.100.7.14.1.7
netmaskAddr
This attribute indicates the static netmask of the management interface.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.4526.100.7.14.1.8
gatewayAddr
This attribute indicates the static gateway IP address for the management interface.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.4526.100.7.14.1.9