forcePortTxPwrMode
VES1724-58V-MIB ·
.1.3.6.1.4.1.890.1.5.12.49.17.9.1.11
Object
column
r/w
Enumeration
Configures TX Power Mode.
fix: Fix to maximum of rate.
power: priority to power.
rate: priority to rate.
Context
- MIB
- VES1724-58V-MIB
- OID
.1.3.6.1.4.1.890.1.5.12.49.17.9.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- forcePortSettingEntry
- Table
- forcePortSettingTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | fix |
1 | power |
2 | rate |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| forcePortTransType Configures allowed transmission type.
The setting is undefined and system takes settings for transmission type, Annex M, L, I, J, power management, and TX power mode from profile… | column | Enumeration | .1.3.6.1.4.1.890.1.5.12.49.17.9.1.1 |
| forcePortL2PwrDnMax Configures Power Management parameters
(used for ADSL2 and ADSL2+ protocol).
The unit is dB. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.49.17.9.1.10 |
| forcePortMinInpDs Configure downstream minimum INP for 4.3125KHz carrier space DSL link.
The unit is 0.5 symbol. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.49.17.9.1.12 |
| forcePortMinInpUs Configure upstream minimum INP for 4.3125KHz carrier space DSL link.
The unit is 0.5 symbol. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.49.17.9.1.13 |
| forcePortMaxUsTxPwr Configure maximum upstream allowed transmit power.
The unit is 0.1 dBm. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.49.17.9.1.14 |
| forcePortMaxDsTxPwr Configure maximum downstream allowed transmit power.
The unit is 0.1 dBm. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.49.17.9.1.15 |
| forcePortMaxUsRxPwr Configure maximum aggregate receive power at the ATU-C.
The unit is 0.1 dBm. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.49.17.9.1.16 |
| forcePortAnnexM Enable/Disable Annex M. This is ADSL specific setting. | column | Enumeration | .1.3.6.1.4.1.890.1.5.12.49.17.9.1.2 |
| forcePortAnnexL Enable/Disable Annex L. This is ADSL specific setting. | column | Enumeration | .1.3.6.1.4.1.890.1.5.12.49.17.9.1.3 |
| forcePortAnnexI Enable/Disable Annex I. This is ADSL specific setting. | column | Enumeration | .1.3.6.1.4.1.890.1.5.12.49.17.9.1.4 |
| forcePortAnnexJ Enable/Disable Annex J. This is ADSL specific setting. | column | Enumeration | .1.3.6.1.4.1.890.1.5.12.49.17.9.1.5 |
| forcePortPmMode Configures Power Management operating mode.
(used for ADSL2 and ADSL2+ protocol)
disable: disable power management.
allowL3: dsl could autonomously transmit to idle… | column | Enumeration | .1.3.6.1.4.1.890.1.5.12.49.17.9.1.6 |
| forcePortL0Time Configures Power Management parameters
(used for ADSL2 and ADSL2+ protocol).
The unit is seconds. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.49.17.9.1.7 |
| forcePortL2Time Configures Power Management parameters
(used for ADSL2 and ADSL2+ protocol).
The unit is seconds. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.49.17.9.1.8 |
| forcePortL2PwrDnStep Configures Power Management parameters
(used for ADSL2 and ADSL2+ protocol).
The unit is dB. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.49.17.9.1.9 |